Aircraft Engineer Resume Sample
Work Experience
- Exemplifies Garmin’s Mission Statement and Quality Policy and proactively works to improve Garmin’s image and culture
- Directs and monitors functional engineering department(s) progress on assigned design project(s)
- Understands systems engineering principles of requirements generation, design to meet those requirements, and verification of those to demonstrate compliance
- Prepare and/or check documentation as necessary to satisfy customer, company and regulatory requirements
- Specialty in one of the following (Composites design/analysis, Damage Tolerance, Installation Design)
- Work to quickly resolve structural/mechanical manufacturing and installation problems
- Experience working on commercial aircraft completions or modifications
- Verify if Mechanics and B1/B2 Support Staff assigned (‘crew’) are qualified to perform the task(s)
- Design mechanical components to facilitate installation of avionics and flight control system installations
- Generate mechanical system component and installation drawings and other type design drawings required to support STC projects
- Perform mechanical qualification activities, including environmental testing
- Assist in the generation of certification ground and bench test plans
- Assist in the creation of certification test reports and other compliance data for submission to the FAA
- Checks, corrects or replaces a variety of complex aircraft assemblies, landing gear systems, air conditioner system, pressurization system, and optional equipment installations
- Repairs or replaces engine components and accessory items such as fuel control units, fuel injection system, air bleed system, oil and fuel pumps, starter/generators, and hydraulic and vacuum pumps
- Responsible for clear, concise and accurate written reports in logs, inspection reports and in parts identification for issue and return documents
- Conducts functional checks, engine test runs, instrument tests and alignment, and preventive maintenance on same. Rigging, synchronizing of throttles, and setting the stops
- Uses tensiometers, micrometers, pressure gauges, dial gauges, vacuum gauges, and a variety of hand tools to repair and modify systems or assemblies
- Checks, corrects or replaces a variety of complex aircraft assemblies, landing gear systems, air conditioner system, pressurization system, and optional equipment installations
- Coordinate internal Garmin groups to communicate, execute and meet project goals
- Accurately define aircraft modification compliance requirements in accordance with 14 CFR part 23/25
Education
Professional Skills
- Excellent troubleshooting skills including knowledge and capabilities of using required tools and test equipment
- Knowledge and skills to participate in analysis, design, development, and integration activities
- Good interpersonal and communications skills, high level of integrity, is motivated and disciplined
- Use information systems (computer skills)
- Experience in obtaining MIL-STD testing for new/unknown components
- Experience using E-manuals or reviewing technical data
- Ability and experience in creating detailed 3D CAD models using Siemens NX 10 or similar software
How to write Aircraft Engineer Resume
Aircraft Engineer role is responsible for training, integration, interpersonal, database, security, reporting, manufacturing, design, research, assembly.
To write great resume for aircraft engineer job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Aircraft Engineer Resume
The section contact information is important in your aircraft engineer resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Aircraft Engineer Resume
The section work experience is an essential part of your aircraft engineer resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous aircraft engineer responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular aircraft engineer position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Aircraft Engineer resume experience can include:
- Strong technical and practical skills
- Professional experience developing and managing thermal, energy, and mass balances and budgets
- Develop engineering design and processes for installing Thales InFlyt Experience products onto a variety of airframes
- Work experience in performing both back-of-the-envelope physics and in-depth analyses
- Professional experience working on integration of products with mechanical, electrical, energy, thermal, and software subsystems
- Good knowledge of cutting tools
Education on an Aircraft Engineer Resume
Make sure to make education a priority on your aircraft engineer resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your aircraft engineer experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Aircraft Engineer Resume
When listing skills on your aircraft engineer resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical aircraft engineer skills:
- A combination of practical experience in the design, build, and test of energy storage systems, as well as analytical skills
- Creating conceptual and detailed designs of primary and secondary aircraft structural components using 3D solid modeling
- Experience in preparing mechanical drawings using CAD Software and tools
- Experience in preparing 3D models of mechanical systems and supervising the production of 2D assembly
- Experience using Microsoft Office products including Microsoft Visio, PowerPoint, and Excel required
- Ability and experience in developing aircraft modification data packages and supporting a project throughout the entire lifecycle
List of Typical Experience For an Aircraft Engineer Resume
Experience For Aircraft Systems Engineer Resume
- Restore used parts, component/assembly/engine/module/accessory/unit by inspection, and/or replacement in conformity with an approved standard to extend the operational life
- Deputize as Engineering Manager when the Engineering Manager is absent and assume the full responsibilities as detailed in the Engineering Manager’s Job Description
- Issue instructions (EO’s) and documents to economically support operations and return aircraft to service in a safe, airworthy, and timely manner.Develop and/or obtain approved data, acceptable data, and Alternate Methods of Compliance (AMOCs) for repairs, alterations, and modifications
- Organize, develop and provide all necessary Systems Engineering documentation required to complete aircraft Systems modifications and repairs within the allocated time schedule and budget allowance
- Prior design and analysis experience in solid laminate and sandwich composite structures for aircraft fairings and radomes
- Able to work effectively in a self-directed team environment
- Proficient presentation, written, and verbal communication skills
- Good knowledge of PC
- Able to demonstrate a background in providing high quality workmanship
Experience For Licensed Aircraft Engineer Resume
- Enhance the employee experience in-line with the role level and Cathay Pacific’s internal brand promise of Life Well Travelled
- Enhance the employee experience in line with the role level and Cathay Pacific’s internal brand promise
- Current and valid Driver’s License and US Passport or ability to obtain US Passport upon hire
- Demonstrate honesty, responsibility, integrity, and fulfillment of commitments
- Military aviation experience
- Experience using flight technical manuals
- Experience on business jet aircraft is desirable
- Experience with aircraft or avionics or weapons delivery technical manuals
- Experience in avionics and flight control design, installation and certification
Experience For Aircraft Structural Engineer Resume
- Proven record of delivery in a production environment
- Experience with fighter aircraft weapons, weapons systems, and weapons support equipment
- Experience with aircraft or avionics or weapons delivery
- Prior V-22 Air Force 7-level or USMC CDI qualification
- Understanding of commercial avionics interface standards and their installation
- Advise to RSAF Officers on matters pertaining to structural engineering for all RSAF aircraft
Experience For B Licensed Aircraft Engineer Resume
- Enhance RSAF engineering authority capability with regards to structural engineering
- Possess knowledge of engineering principles used in stress analysis, 30 computer modelling and other analytical substantiation techniques
- Liaise with the Airports Services, Cargo and other CX airport departments to ensure maximum aircraft handling efficiency
- At least one of the following Aircraft types
- Responsible to the Director of Aeronautical Engineering to provide day to day
- Provides a primary point of contact for all RSAF structural engineering issues
Experience For Aircraft Engineer Supervisor Resume
- Collect and provide all required data (records and documentation) for continuing airworthiness review certificate renewal and extension
- Manage Airworthiness review certificate’s review and extension process including closure of physical and documentation audit and review findings
- Other tasks given by the Head of Engineering
- Aircraft systems installation drawing creation, review, and management
- Assembly and detail mechanical part design, including functional knowledge of GD&T, materials, processes, and basic static stress analysis
- Certification report authoring and management
Experience For Licensed Aircraft Engineer B Resume
- Supports external integration engineering efforts
- Monitor ground based aircraft monitoring to assess aircraft serviceability, and respond accordingly
- Aptitude to learn Extensible Markup Language (XML) tagging in a composite database environment
- Monitor and report status to requirements
- Manages the routine maintenance, servicing and certification of company aircraft in accordance with the HK CAD and company standards and procedures as defined in the EOMP
Experience For Aircraft Maintenance Support Engineer Resume
- Monitor ground based aircraft monitoring and recording to assess aircraft serviceability, and respond accordingly
- Perform and certify aircraft maintenance of Cathay Pacific or Cathay Dragon as well as servicing of third party operator’s aircraft in accordance with the applicable SGHA
- Monitor ground safety during aircraft servicing and maintenance and ensures that all staff operating around the aircraft adheres to general ramp safety practices
- Familiar with the local airport and company E&A procedures
- Airbus A330 RR Trent / Airbus A340-300/CFM56
- B747–400 with RR RB211 524 G/H /PW4000/CF680C2 engine type
- B777-200/300/ER with RR Trent/GE90-115B
- Have a right to stay and work in Thailand
Experience For B Aircraft Engineer Resume
- Experience utilizing CAD software and/or 30 modelling software with obvious and demonstrable proficiency Experience in senior engineering management with a thorough knowledge of engineering authority processes, specifically the types of fighter, transport, rotatory and/or unmanned aircraft systems
- Possess knowledge of engineering principles used in stress analysis, 3D computer modeling and other analytical substantiation techn iques
- A working knowledge of international regulation and policy for military and civilian (aviation as well as International Trade in Arms Regulations (ITAR)
- Assist in the periodic training of contract mechanics
- Perform any other tasks as required by the Engineering Manager
- Manufacturer (OEM) aircraft platforms, specifically the types of fighter, transport rotatory, and/or unmanned aircraft systems
- Strong leadership qual ities with proven interpersonal and team working skills, Computer literate and an experienced user of the Microsoft Office suite of programs (Word, Excel, Power Point, Access, Project)
- Perform transit inspection and other required maintenance on company aircraft, with the assistance of contract mechanics
Experience For Solar Aircraft Power System Engineer Resume
- Perform rectification of airframe, engines, avionics and cabin systems defects on company aircraft, with the assistance of contract mechanics
- Issue Certificate of Release to Service of company aircraft
- Supervise contract mechanics in the performance of their tasks on company aircraft
- Flexible shift hours required to accommodate operational requirements and schedules
- Holder of HK CAD HKAR66 B1.1 license or similar
- Track Wizz Air technical delays every day and collect required details
- Report technical delays and reliability data internally and to external organizations (LHT, Airbus, IAE)
Experience For Senior Aircraft Systems Engineer Resume
- Report reliability data, technical delay and fleet utilization
- Update aircraft and engine logbooks
- Sent updates for all approved data internally and to maintenance Suppliers
- Manage reliability data service
- Creation and management of continued airworthiness data (such as AD/SB/EO/HT/AMP status reports)
- Cooperation at development and management or Airworthiness review processes and procedures
- Follow applicable requirements of Safety Management System
- Bill of material and data configuration management; fastener and material selection
- Fixed control system design, including familiarity with mechanism design and analysis, airframe integration, human factors engineering, handling qualities, control system rigging, static and fatigue stress, system troubleshooting
List of Typical Skills For an Aircraft Engineer Resume
Skills For Aircraft Systems Engineer Resume
- Liaise effectively with APT staff and working groups on the aircraft to ensure a well-managed operation
- Experience working during last two years on at least one aircraft type for each license (sub)category
- Maintains good housekeeping practices
- Experience with aircraft avionics sensors including RADAR, Electronic Warfare
- Previous working experience within an Aviation facility
- In aviation maintenance environment with at least 2 years certifying experience as a license holder
- Type rated and experience working on the Bell 212 / 412
Skills For Licensed Aircraft Engineer Resume
- Recent experience of working within an aviation environment
- Good working knowledge of H & S policies and procedures
- Experience of working within commercial organisations
- Operate hand tools, power tools and measuring instruments necessary to perform job assignments
- Good understanding of winter operations and de-ice/anti-ice operations
- Experience in delivering customer service
- Experience working in an MRO Workshop environment
- Previous experience of inspecting parts
Skills For Aircraft Structural Engineer Resume
- Experience in aircraft avionics systems
- Dassault Falcon 50EX / 2000LX Experience
- Supervisory experience in a Civil/Military Aviation environment
- Work experience in design and analysis of the electrochemistry of batteries and regenerative fuel cells
- Skilled in typical tools such as Excel and MATLAB
- Experience in control design for aircraft, preferably flexible aircraft
Skills For B Licensed Aircraft Engineer Resume
- Restore a component/engine/module to a serviceable condition in conformity with an approved standard and to ensure that cost effective operation is achieved
- Experience in aircraft maintenance, in the role of Aircraft Engineer
- Progressive experience in design and development of aircraft structural engineering projects required
- Good written and verbal commun ication sk ills in the English language
- Defence industry experience
- DoDAF experience desired
- C-130 experience
Skills For Aircraft Engineer Supervisor Resume
- Involved in at least 6 months of actual relevant aircraft or component maintenance experience in any consecutive 2-year period
- Use standard tools, special tools and operate ground support equipment
- Providing reliable solutions to a wide range of difficult avionics engineering problems using sound problem-solving techniques
- Developing, managing and maintaining Aging Aircraft Programs
- Reviewing and checking engineering drawings, reports, and cost/schedule estimates for completeness and accuracy
- Changing and setting tooling/fixtures
- King Air B200/300 type rating
- Performing trade studies, requirements derivation, and establishing the overall aircraft configuration based on Customer requirements
- Using standard measuring equipment
Skills For Licensed Aircraft Engineer B Resume
- Outstanding customer service abilities required
- Writing detailed structural substantiation reports and other technical reports as required in order to obtain FAA airworthiness approvals
- Full Fluency in English Language, reading/writing/conversing
- Provide structural/mechanical engineering expertise and communicate program information within the Engineering and supporting groups
- Promotes a partnering approach to managing people and the business
- Type Rating on Grob 115E aircraft and Lycoming 360 engines
- Coordinates repair plans with Materials/Purchasing, Maintenance Planning and
Skills For Aircraft Maintenance Support Engineer Resume
- Monitor ground based aircraft monitoring and recording systems to assess aircraft serviceability, and respond accordingly
- Knowledge of and familiarity with a variety of manufacturing methods, including metallic and composite structures
- Knowledgeable using the following Tools: DOORS, MatLab, SysML, Rhapsody
- Be current on all training requirements (recurrent/continuation training)
- Manage Aircraft Station License (Radio Licence) obtaining, updating on-board of each aircraft
Skills For B Aircraft Engineer Resume
- Works in concert with the Certification Engineering team to provide the Engineering design data to support a TC, STC or STC amendment project
- Possibility of operating other manual machines and expanding onto CNC machines
- Monitor ground based aircraft monitoring and recording to assess aircraft serviceability, and respond
- Perform additional aircraft maintenance as requested by CX Maintenance Control and Engineering Planning Hong Kong
- Develop Engineering Orders (EO) and/or Build Specification for the incorporation of modifications to aircraft systems/components
- Report to Engineering Manager - Taipei
Skills For Solar Aircraft Power System Engineer Resume
- In depth knowledge and understanding of Federal Aviation Regulations and current technology of avionics/electrical systems for corporate aircraft
- Aircraft Systems Engineering
- Proficiency working knowledge with Microsoft Office Suite
- Knowledge of MOD Engineering procedures/documentation
- Apprenticeship or HM Forces equivalent training certification
- Commercial background- working to tight deadlines and budgetary requirements
- Needs to understand and deliver customer service, whilst representing the company interests
- Be flexible, willing to perform under pressure and strict deadlines
- Airline/Aircraft Systems Engineering
Skills For Senior Aircraft Systems Engineer Resume
- Sustain the division’s research enterprise; Identify new funding initiatives and opportunities
- Completed an ‘indentured’ engineering apprenticeship or equivalent
- Knowledge on, and practicing of, human factors, human performance and limitations
- Interpret and work with engineering drawings
- Falcon 20 type rating
List of Typical Responsibilities For an Aircraft Engineer Resume
Responsibilities For Aircraft Systems Engineer Resume
- Hydraulic system design, including familiarity with system design and analysis, component design and analysis, component specification management, fluid transmission line routing, and system troubleshooting
- Tier 1 & 2 supplier management for controls and hydraulics, including review of supplier engineering, detail drawings, requirements specifications, test plans, and test reports
- Rating in at least 1 Emirates Flight Training Academy aircraft type desirable
- Supports more senior Engineers in providing structural or electrical analyses for current and future modifications dependent on discipline
- Role is operating a Webster Bennett (Vertical Borer) machine
- Ensure compliance with all Environmental Health and Safety requirements. Everyone at GE Wales is responsible for Quality, ensuring compliance at all times
Responsibilities For Licensed Aircraft Engineer Resume
- Completed an indentured machining apprenticeship
- Set up fixtures and tooling
- Perform additional aircraft maintenance as requested by CX Maintenance Support and Engineering Planned
- Current FAA Part 23 and/or Part 25 Designated Engineering Representative (DER) in Structures
- Perform and certify maintenance and servicing of third party operator’s aircraft in accordance with the
- Commercial background, working to tight timetables
- Falcon 20 type rating (desirable)
- Basic knowledge of Federal Aviation Regulations (FARs) governing aircraft certification
- CATIA V6 install, assembly, detail, and mechanism design
Responsibilities For Aircraft Structural Engineer Resume
- ENOVIA V6 install, assembly, part, document, SDRL management
- Aircraft systems related thermal/fluid analysis
- CAFTA data retrieval and analysis
- 505 production line support, and issue management
- 505 cost out initiatives
Responsibilities For B Licensed Aircraft Engineer Resume
- Supports the overall design of the system and its installation on the aircraft
- Generate engineering modeling, installation drawings, fabrication drawing and other required documentation in support of Thales InFlyt Experience product integration using appropriate CAD tools
- Provides engineering support for Head of Version linefit or prototype retrofit aircraft installations, initial launch production installations to validate design package stability and ongoing support of products to ensure customer satisfaction is achieved
- Supports and participates in customer design reviews (PDR, CDR, etc.)
- Familiar with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer
- Work shifts and/or weekend schedule as required by workload, programs and contacts
- Responsibility for the quality of the parts machined
- Ensure compliance with GE policy, procedure and regulatory requirements and ethical behaviour
- All company members are required to actively participate in the various Quality forums which are the conduit towards achieving the company’s aim of sustained Quality Improvement
Responsibilities For Aircraft Engineer Supervisor Resume
- Ensure all that all SHE requirements are complied with
- Completion and certification of maintenance in accordance with approved data
- Aircraft support at detached locations in UK and overseas.
- Directly perform and certify aircraft maintenance when rostered to do so
- Review work of consultant, contract, and MRO Aircraft Systems
- A self-starter who looks for solutions to problems
Responsibilities For Licensed Aircraft Engineer B Resume
- A willingness to work flexible hours and overseas to support detachments when required
- Perform rectification of airframe, engines, avionics and cabin systems defects on company and third party customer aircraft
- Supervise mechanics in the performance of their tasks on company and third party customer aircraft
- Right to live and work in Canada
- Visual inspect incoming component for obvious signs of damage or deterioration. Ensure the component has been overhauled by Vendors in accordance with purchase order and holds the respective paperwork and certification
- National / Higher National Diploma (12+2 or equivalent) or Apprenticeship in Mechanical, Electronic, Avionics or Aeronautical Engineering or equivalent training with a reputable airline or an approved maintenance organisation
- Airframe & Power plant Certificate required with no violations in past five years
Responsibilities For Aircraft Maintenance Support Engineer Resume
- EASA Part 66 Aircraft Maintenance License: B1 and/or B2 and/or C
- Up to date basic knowledge requirements of Appendix I to Part-66
- Basic knowledge of Part-M, Part-145 and any other relevant regulations
- Knowledge on EWIS and CDCCL when relevant
- Work in accordance with the maintenance data and to notify the function responsible of defects or mistakes requiring rectification to re-establish required maintenance standards
- Experience in performing one or more of the following: system requirements development, system design development, system integration and verification, statistical analysis & validation
- Experience on Business aviation
- A valid ICAO type II license/JAR 66/GCAA/EASA B1 (with no limitations) type rated in at least two types of Company aircrafts with the applicable approvals
- Continuous drive for excellence
Responsibilities For B Aircraft Engineer Resume
- Interpret complex technical drawing, system descriptions, wiring diagrams, schematics, and manufacturer specifications into clear, concise instructions used in pilot procedural manuals and avionics/weapons delivery manuals
- Ability and experience in performing airframe structural analysis via a combination of classical hand calculations and Finite Element Analysis
- Knowledge of and familiarity with Federal Aviation Administration aircraft certification requirements
- EASA Part 66, B1.2 license, or B3, B1.1 ,or partial completion modules / completed modules to be shown on CV
- Self-starter who looks for lateral solutions rather than problems
- A willingness to work flexible hours when required
Responsibilities For Solar Aircraft Power System Engineer Resume
- EASA Part 66 Aircraft Maintenance Licence B1 no restrictions
- Proline 4 avionics knowledge
- Experience using technical orders, maintenance instruction manuals, engineering data, and publications supporting operation and maintenance of military aircraft weapons systems is required
- Obtain and maintain a Secret clearance in a timely manner per business requirements (US citizenship is required)
- Perform and certify aircraft maintenance to ensure a high level of safety, reliability, security and presentation required by customers, regulatory authorities and the company in a cost-effective manner
Responsibilities For Senior Aircraft Systems Engineer Resume
- Manage and monitor the performance of subcontractors
- EASA Part 66 Aircraft Maintenance Licence B1 with no restrictions (desirable)
- Directly performs and certify aircraft maintenance when rostered to do so
- Perform additional aircraft maintenance as requested by CX Maintenance Control and Engineering Planning Hong Kong ( ADD Clearance ) as appropriate to qualification
- Monitors ground safety during aircraft servicing and maintenance and ensures that all staff operating around the aircraft adhere to general ramp safety practices
- Completed an ‘indentured’ engineering apprenticeship
- Computer literate on Microsoft based systems
- Familiar with aircraft maintenance control and management systems