Commissioning Engineer Resume Sample
Jodie Leffler
250 Swaniawski Cape,
Detroit,
MI
+1 (555) 239 9342
Work Experience
Lead Commissioning Engineer
09/2016
-
PRESENT
New York, NY
- Have strong technical background
- Work in a very project oriented culture
- Have strong project execution focus
- Complete and pass pre-employment background and drug test
- Assignments often require work to be performed at night. Work schedules and hours change often. Working weekends is not uncommon. Working conditions are not always desirable
- Travel throughout the state of New Jersey to multiple locations on a daily basis
- Travel up to 20% domestically and/or internationally
- Possess and Maintain a valid and unrestricted driver’s license
Commissioning Engineer
05/2010
-
07/2016
Los Angeles, CA
- Works with Dispatcher -Operators and other operating groups to resolve these issues
- Conducts frequent field inspections of construction sites to keep abreast of construction
- Systems familiarization and review as defined in P&ID’s, process descriptions, plot plans and Vendor documents
- Perform vessel and column internal inspections for final closure
- Witness Construction pre-commissioning air blowing/ leak testing activities and provide guidance where necessary to achieve agreed criteria
- Participate in pre-Mechanical Completion walk down and punch listing activity on system basis
- Writing Cold Commissioning Procedures in accordance with Project, Client and Vendor requirements
- Make quantitative estimates of required labour and durations for Cold Commissioning activities
Junior Commissioning Engineer
06/2005
-
11/2009
Boston, MA
- Capture lessons learned and enter into MDR’s Lessons learned system
- Capture Knowledge objects and enter into MDR’s K.now system
- Conduct on-site design or investigation work to ensure adequacy of contractor’s methods. Evaluate contractor’s procedures, starting and completion times, and staffing requirements for each phase of construction
- Ensure that the Company’s QA/QC Procedures are adhered to when instituting field revisions
- Be familiar with the Company’s drawing system and design and construction standards as well as applicable industry codes and practices
- Valid driver’s license issued by state of residence and in good standing is required
- Assigns equipment and line designations in and for electric substations, line switch, new and existing lines, and addresses special operating conditions within these areas
- Monitors current electric system operating conditions using Energy Management Systems and other computer data based systems, as they become available, for abnormalities affecting or having the potential to affect safety and/or system reliability
Education
Arkansas Tech University
2000 - 2004
Engineer's Degree in Electrical Engineering
Professional Skills
- Strong interpersonal, communication, and negotiation skills with demonstrated ability to work within a team environment
- Skills or experience with personal computers, including electronic E-mail, personal scheduling, word processing and electronic spreadsheet
- Demonstrated analytical skills and problem-solving capability
- Strong facilitation, team building, collaboration, and problem solving skills
- Excellent communication skills with an ability to build and develop effective teams
- Strong technical skills in facility system design, construction and operations
- Strong sub-contractor management skills
How to write Commissioning Engineer Resume
Commissioning Engineer role is responsible for leadership, software, computer, english, basic, microsoft, organizational, database, reporting, programming.
To write great resume for commissioning engineer job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Commissioning Engineer Resume
The section contact information is important in your commissioning engineer resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Commissioning Engineer Resume
The section work experience is an essential part of your commissioning engineer resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous commissioning engineer responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular commissioning engineer position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Commissioning Engineer resume experience can include:
- Good English and Danish language skills ideally with basic knowledge of German
- Safety oriented, excellent interpersonal and communication skills
- Able to demonstrate solid Health and Safety credentials and able to operate within a certified SHES system
- Good communiation skills
- Work effectively in a highly dynamic environment with changing priorities under tight time constraints
- Good relationship and reporting skills
Education on a Commissioning Engineer Resume
Make sure to make education a priority on your commissioning engineer resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your commissioning engineer experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Commissioning Engineer Resume
When listing skills on your commissioning engineer resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical commissioning engineer skills:
- Analytical thinking and good communication skills are required competencies
- Good communication skills with the ability to communicate at all levels
- Good inter-personal skills, self-organised and motivated
- Good communication skills and able to liaise with customers in territories, worldwide
- Strong organizational and computer skills are necessary
- Good IT and analytical skills
List of Typical Experience For a Commissioning Engineer Resume
1
Experience For Test & Commissioning Engineer Resume
- Proficiency in testing, fault finding skills, troubleshooting basic and integrated audio visual systems
- Experience in the field of SW and HW planning, engineering, field assembly and commissioning and System administration IT experience
- Capital equipment service technician experience strongly desired
- Experience developing, planning and implementing testing strategies
- Supports preservation activities following completion of pre-commissioning and commissioning to ensure that modules are adequately preserved prior to load out
- Hands on experience performing design reviews, developing commissioning plans, specifications and procedures
- Handle projects to perform Configuration & Internal validation by using basic desing documents
2
Experience For Lead Commissioning Engineer Resume
- Working experience in the related field is required for this role
- Assists the EPC Contractor with their System Completion planning and activity prioritization from Mechanical Completion to handover to Operations for Start Up
- Support and share cost-effective operating techniques with others within ARAMARK
- Experience in provisioning VC units (Cisco / TMS or Polycom / RPRM)
- Experience of working with high voltage is advantageous
- Willingness to travel UK wide and globally (valid passport and full driving licence) and to also work some weekends as required by the customer
- Good back ground in HV substation components testing like switch gear equipment, AC, DC systems, battery chargers, transformers,…etc
- Demonstrate ownership of the commissioning phase of the project and proactive resolution of problems
- Experience with FRA rules and regulations
3
Experience For Senior Commissioning Engineer Resume
- Lead client meetings and demonstrate expert level of technical capabilities
- Experience in the audio/visual field or a related field
- Strong attention to detail and processes
- Experience in DSP (Biamp, Polycom sound structure, any other relevant industry certifications)
- Experience with Crestron toolbox, simple debugger, text console and other Crestron tools
- Experience in Compressors Control systems
4
Experience For Protection & Control / Commissioning Engineer Resume
- Demonsrable experience of commissioning complex Fire Safety Systems
- Successful experience in related field and successful demonstration of Key Responsibilities and Knowledge as presented above
- Flexible and adaptable, able to work as part of a team with a strong focus on quality and delivery in a fast-paced environment
- PLCs and Robotics experience is highly desired
- Willing to work during flexible working hours, including weekends and overtime
- Planning, maintaining, and optimizing commissioning spares & calibration tools, Personal protective equipment (PPEs) and maintain all related records
5
Experience For Lead DCS Commissioning Engineer Resume
- Complying with all the Client safety related standards and procedures including during any test and commissioning phase
- Implementing and refreshing initiatives to improve behaviours relating to SHEQ
- Servicing, repairing, conducting preventative maintenance as needed
- Commissioning, start-up and troubleshooting of branded processing units and process lines at our customer’s sites
- Understanding in system calculation, manufacturing and installation matters with design and planning of electrical substation
- Coordinating the installation team and assuring the knowledge sharing and site support
- Analysing the WTG performance after commissioning and preparation for conducting reliability tests
- Coordinating the maintenance team and assuring the knowledge sharing and site support
- Overseeing the closing of all commissioning related issues
6
Experience For Senior Test & Commissioning Engineer Resume
- Writing Risk Assessments for all identified Cold Commissioning activities
- Tuning closed loops including auto change over for all equipment’s such as MDBFP, TDBFP, CEP, MCW, etc without trippi9ng the unit
- Training of customer technical representatives including managers, superintendents, maintenance engineers and operators
- Demonstrating safety excellence by ensuring KPI and KPM measurements are No.1 in the STW region
- Reading schematics, wiring layouts and mechanical blue-prints
- Achieving all Commissioning milestones within the site schedule for his systems
7
Experience For Principal Test & Commissioning Engineer Resume
- Maintaining and enhancing the professional image and reputation of GE at all times
- Troubleshooting both hardware and software problems/incidents
- Following ABB’s Safety requirements
- Mentoring other through shared technical knowledge to support the technical growth of other with the group
- Providing technical support to lab technicians
- Reviewing supply chain performance against Costain KPIs and KPMs
- Working knowledge of standard LINUX OS and WINDOWS OS
- Willing to work under 36-month contract
- Maintaining an intensive customer relationship and a high level of customer satisfaction
8
Experience For Mission Critical Commissioning Engineer Resume
- Installing industrial machinery and automated equipment on-site
- Supervise specialist Sub-contractor activities including chemical cleaning, oil flushing, pigging, hydro-jetting and steam blowing
- Co-coordinating testing and commissioning activities and providing advice on testing and commissioning procedures and documentation
- Accountable for ensuring all commissioning is carried out in accordance with project commissioning specifications, standards and procedures
- Accountable for developing commissioning strategies and approving procedures
- Supervise special operations such as catalyst loading, chemical cleaning, and steam blowing with specialist contractors (if any)
- Works project through to Handover, including supporting all offshore commissioning activities
9
Experience For S&PC Commissioning Engineer Resume
- Monitor and review / witness site inspection and testing relating to pre-commissioning on behalf of PMC
- Project execution/commissioning background with an understanding of detailed engineering of various security systems
- Motivation for satisfying demanding customers and partners; putting their requests first
- Capable of evaluating the requirements of a wood treating system and translating those requirements to make modifications to the software system
- When acting in the role of Authorised person PTW process, he is responsible for securing and confirming all TIP
- Integrate Rapiscan’s Explosive Detection Systems (EDS) into Baggage / Material Handling Systems (BHS) via programming and configuring PLCs
- Supervision of, and preparation of fundamental specification, programming, commissioning, final tuning of HVAC controls
- Support in installation activities viz-a-viz crane co-ordination, material co-ordination, unloading/ loading, preparation & rigging activities
- Impart on the job training on commissioning to installation engineers/ freshers and contribute in development of Installation & Commissioning organization
10
Experience For Lead Test & Commissioning Engineer Resume
- Substations (Protection relays maintenance, installation, testing, troubleshooting and commissioning)
- Witnesses and reports on piping hydrostatic testing, duct air leakage testing
- Assist in scheduling and monitoring all training activities between the owner, sub-contractors, and manufacturer’s representation
- Knowledge of the building design and construction industry with expertise in the building commissioning process is essential
- Configuration of analytical equipment to process requirements, ie calibration, interfacing with monitoring equipment etc..
- Co-ordinate and produce commissioning plans for approval, ensuring that all relative documentation is completed
- Accountable for ensuring commissioning is carried out in accordance with project schedules and budget
- Implement modification using engineering tools (Controcad)
List of Typical Skills For a Commissioning Engineer Resume
1
Skills For Test & Commissioning Engineer Resume
- TS_Commissioning Engineer Primary System: Technical product/system skills
- TS_Commissioning Engineer Secondary Systems: Technical product/system skills
- Demonstrable experience of having built strong working relationships both internally and externally. (UK and Europe)
- Prior experience working in rail signaling
- Excellent Planning and documentation experience
- Good practical experience with process engineering & design (P&ID, Mass balance, Layout) for AL specific applications
- Communicate effectively on technical / engineering issues internally as well as with the customer
2
Skills For Lead Commissioning Engineer Resume
- Conflict Management - Effectively deals with conflict in a way that recognizes and manages differing opinions and ideas
- Proven experience as a Lead Commissioning Engineer on an oil and gas project or related industry project
- Proven experience in installation, test and commissioning activity
- Result focused, good teamworker, responsible, good at coordinating and drive activities forward towards common goals
- Foresight to anticipate problems and recognize opportunities for cost-effectively improving operations
- Experience in service and 3 years of experience in commissioning and design
- Aptitude for development of leadership, management and decision-making skills are an asset
- Good process experience of edible oil processes particularly in neutralization, fractionation and hydrogenation
- Communicate effectively with audiences that include but are not limited to management, coworkers, clients, vendors, contractors ,and visitors
3
Skills For Senior Commissioning Engineer Resume
- Special skills in energy technology, thermodynamics, flow dynamics and/or water treatment
- Self-motivation and enthusiasm with demonstrable practical skills
- Fault finding skills on gas turbines, control systems, hydraulics, pneumatics and electrical systems
- Demonstrated commissioning project experience to include Design, Construction, and Post-Occupancy phase processes
- Experience in prioritization while multi-tasking under pressure and within short time constraints
- PLC, SCADA & HMI programming skills and specifically the ability to maintain PLC ladder logic software
- Understanding and experience with the practice of Commissioning in accordance with ASHRAE Guideline 0 and other related guidelines
4
Skills For Protection & Control / Commissioning Engineer Resume
- Experience in designing, inspecting, testing, balancing and commissioning building systems
- Extensive experience testing, tuning, calibrating, and troubleshooting DCS and control systems for supercritical coal fired power plants
- Demonstrable experience in leading small engineering teams in installations / support engineering
- Daily routine of all technical aspects of equipment delivered to the field including testing, validation, commissioning and
- Daily routine of all technical aspects of equipment delivered to the field including testing, validation, commissioning and warranty activities at the site
- Commissioning experience of working on Studies, FEED and EPC Refining projects in both design and site project phases
- Commissioning experience of working on Studies, FEED and EPC Gas Processing/Gas Plant projects in both design and site project phases
- Prepare all necessity prior to go to site including generate design, and detailed engineering deliverables for a particular engineering discipline
5
Skills For Lead DCS Commissioning Engineer Resume
- Have experience of installing, commissioning and maintaining switchgear
- Experience in data center construction, design, field engineering, testing, data center operations, or critical facilities
- Knowledge of and previous experience with plant commissioning and verification of commissioning documents
- A good working knowledge of engineering concepts and principles
- Hands-on Experience in medium voltage GIS/AIS installation, testing and commissioning
6
Skills For Senior Test & Commissioning Engineer Resume
- Hands on experience developing commissioning plans, specifications and procedures
- Building Commissioning experience
- To provide cost effective system commissioning and ICA engineering
- Daily routine of all technical aspects of equipment delivered to the field includin testing, validation, commissioning an warranty activities at the site
- Experience including the commissioning of high pressure, variable speed, High capacity Boiler Feedwater Pumps and auxiliary equipment
- Proven technical knowledge and understanding of electrical engineering concepts
- Distribution/Service Network Knowledge - Demonstrated results in communicating and working with Distributor personnel to complete performance plan objectives
- Up to a maximum of two years of engineering-related work experience, not including co-op or internship work terms
- Experience developing and executing test procedures for mechanical or electrical equipment based design intent and approved equipment submittals
7
Skills For Principal Test & Commissioning Engineer Resume
- Experience in engineering and / or servicing or similar position within the pharmaceutical market
- Contribute to ensuring commissioning related experience and knowledge gained on projects is captured and incorporated into future projects
- Experience of robot commissioning and programming in automation industry
- Strong knowledge and background of technology covering commissioning and service activities
- Previous experience of working in a Electrical environment
- Hands on experience in Control & Relay Panel Commissioning for Domestic & International Project Sites
- Experience working in a comparable technical role
- Experience of differing business sectors and industry
- BS in engineering discipline or construction management; or equivalent technical work experience
8
Skills For Mission Critical Commissioning Engineer Resume
- BS in engineering discipline or construction; or equivalent technical work experience
- Relevant work experience in commissioning of substation control- and protection systems
- Experience with automated protection testing tools (e.x. Omicron)
- At least five years’ experience in commissioning of complex cranes or machinery
- Have a good, in depth knowledge of rotating equipment. Ideally Siemens Small Gas Turbines
- First experience in the field of automation engineering
9
Skills For S&PC Commissioning Engineer Resume
- Direct hands on systems commissioning experience
- Experience working with customers and a multiculture environment
- Past experience with chromatography technology and / or upstream equipment and / or mixing technology
- Min 2-5 years experience working with Mechanical/ Electrical/ Automation/ Control systems in related industries is mandatory
- A demonstrated track record within commissioning environment
- Experience in commissioning of Water Treatment Plant and RO System (essential)
- Experience on successfully leading multidisciplinary teams
- Experience working with client directly
- Experience/Knowledge in one or more of the following areas
10
Skills For Lead Test & Commissioning Engineer Resume
- ) of operations / commissioning experience
- ) of operations / commissioning experience for LNG plant
- Experience in similar role (wind commissioning, field service etc.)
- Experience as a commissioning engineer in the specified field
- Perform effective troubleshooting and react quickly to understand and resolve problems for facility systems, equipment and processes
- In pharmaceutical facility design, start-up, commissioning, validation and/or operations required
- Experience leading multiple concurrent teams and projects
List of Typical Responsibilities For a Commissioning Engineer Resume
1
Responsibilities For Test & Commissioning Engineer Resume
- 1) Provides leadership on a multi-disciplinary commissioning team to conduct formal testing and performance analysis of data center facility infrastructure systems and equipment
- 2) Develops unique and custom commissioning procedures to verify data center facility systems performance, specifying resources and schedules to fulfill a commissioning Scope of Work
- 3) Provides client facing representation as the Commissioning Engineering Agent of Record in project, construction and problem resolution meetings, documenting topics, activities, commitments and related project subjects
- Demonstrate exceptional project management skills by providing clear, transparent and regular updates on project statuses
- Systematic approach and good documentation skills
- Good communication skill in both English and Thai / Bahasa Indonesia
- Develop technical skills of the self and team time to time
2
Responsibilities For Lead Commissioning Engineer Resume
- Proven work experience in process engineering 2+ years
- Computer skills in regards to general usage (Windows, Outlook, MS Office, etc)
- Technical discussion with customers/consultants and ability to communicate effectively and act decisively
- Detailed experience with ProCoSys and good knowledge of MIPS, SAP and TIME
- Functional verbal and written skills in English
- Experience of panel building, electrical installations and the 17th Edition wiring regulations
- Experience in Building Commissioning focused on healthcare, cleanrooms and laboratory facilities
- Experience in installation with construction, commissioning and test required
3
Responsibilities For Senior Commissioning Engineer Resume
- HVAC and controls experience in design, construction, energy evaluation and Commissioning
- Experience with Building Automation Systems or related systems
- Cooperate with ABB Project Manager on establishing status of completed and non-completed work
- Knowledge on rail interlocking and experience on retrofit of commissioned systems
- Twelve (12) years of experience in operations, mechanical, electrical, distributed control systems (DCS) or instrumentation and controls (I&C) commissioning
- Experience and willingness to work in an overseas environment is required, and has range of relevant qualifications in related Engineering discipline
- Previous experience in testing activities
- Solid understanding of all current digital communication standards utilized in modern power plants
- Have experience of working alone and as part of a team at UK, overseas and offshore locations
4
Responsibilities For Protection & Control / Commissioning Engineer Resume
- Good general background in the design of / support of electronic/electrical engineering systems
- Good engineering track record to meet project requirements and customer satisfaction
- Experience of working in a multinational and multicultural environment
- PLC Programming Experience Advantageous
- Experience of Electrical instrumentation and control systems with a focus on gas metering and analysers
- Strong understanding of the products and services available, as well as the customers’ and potential customers’ drivers
- Experienced in the supervision of personnel and team working
- Good knowledge of O&G related SHEQ safe working practices / procedures
5
Responsibilities For Lead DCS Commissioning Engineer Resume
- Previous experience of working in an Electrical environment
- Strong understanding of potentially explosive atmospheres e.g ATEX, DSEAR etc. (COMPEX EX01-04 advantageous)
- Validate System Completion Plans meet the intent of project specifications
- Very Good knowledge of SIPROTEC and REYROLLE products. Any other manufacturer is an advantage
- Technician experience in the control systems
- Exhibit good communication with the project team and customer, both verbal and written
6
Responsibilities For Senior Test & Commissioning Engineer Resume
- Experience in water industry
- Project experience desirable (as project team member or sub project manager)
- Commission and demonstrate control systems and field controls
- Experience in the field of industry/energy automation
- Solid knowledge in the area of control- and protection systems
7
Responsibilities For Principal Test & Commissioning Engineer Resume
- Good knowledge of Automation Products, knowledge of Siemens products is an advantage
- Good knowledge of technical standards and regulations
- Experience in the field of digital protection
- Good knowledge of Protection Products, knowledge of Siemens products is an advantage
- Lead safety principles within the business portraying excellent safety leadership qualities
- Practice and demonstrate ABB core values
- Ensure the effective integration of assets into the existing works without detriment and risk to service level agreements
- Drive efficiencies and operate tight change control procedures on nominated projects
- Perform inspections of equipment prior to handover
8
Responsibilities For Mission Critical Commissioning Engineer Resume
- Implement special test programs to validate new hardware and software improvements and releases
- Conduct due diligence check of mechanical and electrical completion of WTG prior to commissioning
- Proactively plans, oOversees and provides recommendations to priorities and activities of startup work scope and milestones
- Successful experience in related field and successful demonstration of
- Self- motivated, result-driven and Strong team player
- Experience in Claim Management
- At least 5 of experience in the related fields
9
Responsibilities For S&PC Commissioning Engineer Resume
- Strong interest for hands on work, Ability to work within a team and both individually, self driven personality
- Five (5) years control room operations experience (operations/mechanical)
- Track record of over 10 years’ experience in a PMC / EPC organization in the field of refinery / petrochemical industries
- Experience in a similar position under refinery / petrochemical projects
- Experience from SAS and Mechanical completion and commissioning from modification and maintenance projects
- Valid offshore sertificate and other certifications
- Strong knowledge in electric products application concepts, practices, procedures in major electrical power and industrial system applications
- Previous experience in managing design & engineering management
- Ensure handover the completed facility with a strong emphasis on HSE, planning, quality and documentation
10
Responsibilities For Lead Test & Commissioning Engineer Resume
- Valid passport, free to travel internationally, reliable automobile and driver’s license
- Knowledge of ATC Systems (2 years of experience)
- Strong initiative and professional demeanour
- Be customer/results focused and demonstrate a ‘service’ disposition
- Good knowledge of Digsi 4 & 5 software
Related to Commissioning Engineer Resume Samples
Innovation Engineer Resume Sample
Work Experience
• Represent Customer and Service as a core team member for program and technical design review meetings
• Self-going and comfortable with solving challenging technical problems
• Technically curious, i.e. having a high interest in finding, exploring and understanding technology...
Professional Skills
• Experience in Design of Experiments and st...
• Demonstrated skills in selecting good prac...
• Strong problem-solving skills with systems...
NPO Engineer Resume Sample
Work Experience
• To perform technical tasks for customer projects according to project plan (with project manager’s guidance)
• High level of experience with Nokia 3G & LTE parameters and features (Including VoLTE)
• Experience in Nokia radio network performance and parameter optimisation...
Professional Skills
• Excellent language skills (English skills ...
• Strong technical consultative skills is ne...
• Good programing skills is prefered
Value Engineer Resume Sample
Work Experience
• Owns, manages and updates the locations’ Total Initiative List
• Designing tools and deliverables to help penetrate enterprise customer accounts, including Business Capability and Retrospective Studies and Outside-In Analyses
• Being the trusted adviser to customers and prosp...
Professional Skills
• Financial modelling proficiency – strong E...
• Excellent written and verbal communication...
• Excellent communication and presentation s...
Engineer Electromechanical Resume Sample
Work Experience
• · Background in Electro-mechanical design is an asset
• · Electro-mechanical design and product development is an asset
• · Basic understanding of railway Rolling Stock both theoretical and practical
• Develop product drawings and models. Manage the mod...
Professional Skills
• Independent working ability; strong initia...
• Computer skills: e.g. .net programming skills
• Strong technical problem solving skills (i...
Assistant Director Engineering Resume Sample
Work Experience
• Stationary Engineer’s license if required by local code
• The worker is subject to noise: there is sufficient noise to cause the worker to shout in order to be heard above the surrounding noise level
• The worker is subject to vibration: exposure to oscillating movements of t...
Professional Skills
• Excellent customer service skills with gre...
• Demonstrate strong leadership, good interp...
• Demonstrated skills in effective budget an...
Engineer Service Resume Sample
Work Experience
• Install, configure, and upgrade nodes in high availability customer production clusters
• Build long lasting, effective partnerships across the organization to foster collaboration between Product, Engineering and Operations teams
• Organize and manage multiple simultaneous p...
Professional Skills
• IT experience in an IAAS / PAAS environmen...
• Previous experience with Network Administr...
• Very good verbal and written communication...