Electronic Integrated Systems Mechanic Resume Sample
Monroe VonRueden
933 Kaylie Club,
Philadelphia,
PA
+1 (555) 827 5296
Work Experience
Electronic Integrated Systems Mechanic Leader Foreman Ii Meter & Relay
09/2016
-
PRESENT
New York, NY
- Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system
- Apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies
- Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas
- Knowledge of the technology and practices which integrate the components of the systems into a total functional system. Determine methods of repair where extremely complex relationships exist among numerous inter-connected units and control circuits; not only within the individual control systems but between them as well
- Knowledge and ability to perform complex mathematics including algebra and trigonometric formulas to calculate power relationships, signal phasing, etc., and to solve work related problems
- Accurately identify, isolate, repair, align, and adjust complete multi-system complex malfunctions of the aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops
- Working knowledge of the Technical Order system and other technical publications and directives relating to the section. Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques
Electronic Integrated Systems Mechanic
07/2013
-
07/2016
Chicago, IL
- Experience in diagnosing problems and determining needed repairs for malfunctions of electronic integrated systems equipment
- Experience in using a wide variety of test, measurement and diagnostic equipment (TMDE)
- Experience which demonstrates the ability to interpret technical manuals, specifications and publications
- Use precision test equipment, computerized support equipment, technical data, schematics, signal and data flow diagrams and test procedures, fault isolation procedures and mathematical formulas?
- Knowledge of the principles of digital and analog circuits, electromechanical devices, solid state devices, digital techniques, radar theory, and radio communication theory?
- Apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace problems back through a number of units of the system to locate deficiencies?
- Perform repair or replacement of a variety of wiring connectors and wiring harnesses, conduct soldering operations, perform aircraft cryptologic keying, and understand proper handling of COMSEC and classified material?
Electronic Integrated Systems Mechanic t
03/2008
-
02/2013
Phoenix, AZ
- Communicate effectively orally and in writing?
- Comprehensive knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices
- Knowledge of F-16 automated test equipment
- Plan use of subordinate workers, equipment, facilities and materials and establish deadlines and priorities and work assignments based on general work schedules, methods, and policies set by higher level supervisors
- Read and interpret a variety of technical data such as schematic diagrams, blueprints and technical order relating t the electronics trade. Knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices
- Knowledge in computer skills is required. Ability to be able to access and use computer based maintenance documentation and supply systems, and be capable of assimilating training on new systems as they are developed and implemented. Knowledge of USAF Technical Order Program and its procedures
- Read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade. Ability to use a variety of electronic, electrical, or electromechanical test and measurement equipment
- Comprehensive knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices. Knowledge of USAF Technical Order Program and its procedures
- Knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices
Education
Indiana Wesleyan University - Kokomo Campus
2004 - 2008
Engineer's Degree in Computer
Professional Skills
- Skilled in collecting and analyzing data effectively, efficiently, and accurately
- Reviewing work requirements and establishing priorities to meet deadlines
- Skilled in training, mentoring, leading, and problem-solving
- Experience maintaining, modifying, calibrating and inspecting a wide variety of user tests, measurements, and diagnostic equipment
- Skill in completing technical order compliances, completing component and system modifications, and performing thorough system checks for correct operations
- Skilled in applying procedures and directives by reading and interpreting material
- Experience solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems
How to write Electronic Integrated Systems Mechanic Resume
Electronic Integrated Systems Mechanic role is responsible for maintenance, documentation, training, computer, access, supply, basic, technical, english, completion.
To write great resume for electronic integrated systems mechanic job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Electronic Integrated Systems Mechanic Resume
The section contact information is important in your electronic integrated systems mechanic resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Electronic Integrated Systems Mechanic Resume
The section work experience is an essential part of your electronic integrated systems mechanic resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous electronic integrated systems mechanic responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular electronic integrated systems mechanic position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Electronic Integrated Systems Mechanic resume experience can include:
- Effectively communicate with workers and supervisors in English using bot oral and written reports
- Knowledge of basic computer skills. Knowledge of USAF Technical Order Program and its procedures and to clean area and or job site upon completion of work
- Experience conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units
- Experience performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems
- Perform final checks prior to return to mission ready status
- Knowledge in troubleshooting, inspecting, and/or tracing hard-to-locate defects or problems
Education on an Electronic Integrated Systems Mechanic Resume
Make sure to make education a priority on your electronic integrated systems mechanic resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your electronic integrated systems mechanic experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Electronic Integrated Systems Mechanic Resume
When listing skills on your electronic integrated systems mechanic resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical electronic integrated systems mechanic skills:
- Experience or training utilizing principles, basic functions and application of theory of electronic integrated systems equipment
- Skill in performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems
- Making mechanical repairs that require the use of precision measuring and calibrating equipmkent
- Testing, measuring, and diagnosing equipment
- Making mechanical repairs that required the use of precision measuring and calibrating equipment
- Adapting existing equipment and techniques
List of Typical Experience For an Electronic Integrated Systems Mechanic Resume
1
Experience For Electronic Integrated Systems Mechanic Supervisor Resume
- Skill in the use of a variety of hand tools such as screwdrivers, drills, wrenches, soldering irons and microsoldering units
- Ensures education in, compliance with, and practice of security directives, good safety, and health habits in all work areas
- Completion of course J3ABR2A334-026B or 74 academic days at Sheppard AFB is mandatory for award of semi-skilled AFSC
- Administers the reserve training and associated programs for flight ensuring consistent standards throughout the flight for traditional reservists and ARTs
- Participate with various supervisor in performing specific personnel management responsibility for avionics personnel
- Use a variety of electronic, electrical, or electromechanical test and measurement equipment
- Knowledge in the use of standard hand and power tools of the electronics trade; the set up of operation of computer automatic test equipment (ATE) and test stands oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers frequency counters and signal generators
- Read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronic trade. Comprehensive knowledge of operations, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices
- Skill in the use of variety of hand tools such as screwdrivers, drills, wrenches, soldering irons, and micro soldering units. Ability to follow drawings for integrated electronic systems; use computer terminals to maintain records, document actions to include in GO81. Knowledge of USAF Technical Order Program and its procedures
2
Experience For Electronic Integrated Systems Mechanic t Resume
- Knowledge (Comprehensive) of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices
- Skill in interpreting complex drawings, specifications, and schematics of complete integrated systems to recognize the function and interconnections of components, assemblies, subassemblies connecting cable harnesses, etc
- Knowledge (comprehensive) of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices. Knowledge of USAF Technical Order Program and its procedures
- Knowledge of the technology and practices which integrate the component of the systems into the total functional system
- Thorough knowledge of the principles of digital and analog circuits, solid state devices theory, electromechanical devices, digital techniques, synchro/servo operation and integrated circuit theory
- Interpret/trace schematics, logic/wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas
- Skill in the use of standard hand and power tools of the electronics trade. Skill in the set up and operation of computer controlled automated
3
Experience For Electronic Integrated Systems Mechanic Leader Foreman Ii Meter & Relay Resume
- Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts aircrew debriefing to determine the nature of system malfunctions. (15%)
- Skill in the use of standard hand and power tools of the electronics trade. Skill in calibrating and adjusting components such as amplifiers, proximity boxes, generators, and voltage regulators. (Applies to 5th Generation Aircraft Only)
- Experience working with the flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, very high frequency ultra-high frequency, satellite communications data, intercom, secure voice communications, and identification friend or foe tactical air navigation system
- Experience evaluating operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts
- Knowledge of safety regulations, practices and procedures
- Knowledge of hydraulic and pneumatic principles as well as system pressurization, dehydration, liquid and gaseous cooling systems and other systems assigned to the test station
- Experience in inspecting, testing, troubleshooting, repairing and modifying software controlled automated and manually controlled test stations, electronic circuit aircraft pods, peripherals, support equipment and associated subsystems
- Skilled in reading the complex inter-related variables that resulted from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems
- Read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade. Comprehensive knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices
4
Experience For Electronic Integrated Systems Mechanic Resume
- Read and interpret a variety of technical data such as schematic diagrams blueprints and technical orders relating to the electronics trade
- Isolate malfunctions of complete multiple integrated system complexes
- Knowledge of technology and practices which integrate components of the systems
- Read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade. Ability to effectively communicate with workers and supervisors in English using both oral and written reports
- Knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices. Ability to clean work area and/or job site upon completion of work. Knowledge of USAF Technical Order Program and its procedures
- Skill in the use of standard hand and power tools of the electronics trade. Ability to clean work area and /or job site upon completion of work
- Access and use computer base maintenance documentation and supply systems, and be capable of assimilating training on new systems as they are developed and implemented. Basic computer skills are required
- Knowledge of mathematics including algebra and basic trigonometrlc functions
5
Experience For Electronic Integrated Systems Mechanic Supervisor Resume
- Skill in interpreting complex drawings, specifications, and schematics of complete integrated systems to recognize the function and interconnections of components, assemblies, subassemblies, connecting cable harnesses, etc
- Skill in the set up and operation of computer controlled F-16 peculiar automated test equipment (ATE) and test stands. oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators
- Experience in maintaining, modifying, calibrating and inspecting a wide variety of user tests, measurements, and diagnostic equipment
- Repair, align, and adjust major integrated electronic systems such as inertial navigation systems, automatic flight control, or fire control systems
- Follow drawings for integrated electronic systems
- Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts aircrew debriefing to determine the nature of system malfunctions
- Experience in conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units
- Experience in working with the flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, very high frequency ultra-high frequency, satellite communications data, intercom, secure voice communications, and identification friend or foe tactical air navigation system
- Skill in the use of standard hand and power tools of the electronics trade. Knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices and ability to analyze modify, and repair complex electrical or environmental systems and components on assigned aircraft. (Applies to 5th Generation Aircraft Only)
6
Experience For Electronic Integrated Systems Mechanic t Resume
- Skill in calibrating and adjusting components such as amplifiers, proximity boxes, generators, and voltage regulators. (Apples to 5th Generation Aircraft Only). Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade
- Comprehensive knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices and ability to analyze modify, and repair complex electrical or environmental systems and components on assigned aircraft
- Read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronic trade
- Comprehensive knowledge of operation, capabilities and limitations of complex electronics systems complicated by a variety of multi component assemblies and devices
- Effectively communicate with workers and supervisors in English using both oral and written reports
7
Experience For Electronic Integrated Systems Mechanic Leader Foreman Ii Meter & Relay Resume
- Prepares effective training plans to maximize Reserve training. Certifies work produced under the USAF Technical Order Program
- Comprehensive knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices and ability to analyze modify, and repair complex electrical or environmental systems and components on assigned aircraft. (Applies to 5th Generation Aircraft Only) Knowledge of USAF Technical Order Program and its procedures
- Skill in calibrating and adjusting components such as amplifiers, proximity boxes, generators, and voltage regulators. (Apples to 5th Generation Aircraft Only) Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade
- Responsible for the operation, maintenance, and troubleshooting of the electrical systems for operating various equipment on the lock and dam including installation of IPCs at interface/input locations for normal daily operation, complex programming changes, and software integration
- Consults with the district's electronics engineers on complex, obscure problems for assistance, or when reprogramming of the ladder logic is required
- Responsible for the operation, maintenance, and installation of new replacement cameras and TV monitors and associated fiber optic cable within the integrated system for the CCTV for safety and security subsystems
8
Experience For Electronic Integrated Systems Mechanic Resume
- Disassembles interlocking navigation and interrelated electrical, mechanical systems, subsystems, standby and related equipment to determine extent of repairs, overhaul and/or replacement parts needed
- Makes recommendations to supervisor when major repairs are needed so that coordinated effort can take place relative to temporary repair, technical engineering review, procurement of replacement items and maintenance of lock or dam control capability
- Work with integrated system logic controls in order to troubleshoot and repair/replace various subsystems and/or individual components, which form the overall integrated electronic control system for the locking process and pool control
- Ensures education is in compliance with, and practice of security directives, good safety, and health habits in all work areas
- Performs pretest, operational (functional), or final testing of electronic systems, components, or subassemblies
- Installs, modifies, overhauls, maintains, troubleshoots repairs, rebuilds, aligns, and calibrates electronic systems, components, or subassemblies
- Utilizes safety practices and procedures, complies with security regulations, directives, and policies, and maintains a safe and clean work area
9
Experience For Electronic Integrated Systems Mechanic Supervisor Resume
- Plans on a quarterly or longer basis the overall use of personnel and other resources in two or more separate organizational segments or groups controlled through one or more levels of supervision
- Assigns and explains work requirements and operating instructions to subordinate supervisors and sets deadlines and establishes the sequence of work operations to be followed
- Participates with subordinate supervisors/employees in the development of performance plans
- Provide a work environment that is free from all forms of discrimination, harassment, and retaliation
- Repairs, overhauls, rebuilds, modifies, tests, troubleshoots, removes, replaces, aligns, calibrates, inspects and mates avionics integrated electronic and environmental systems
- Installs, modifies overhauls, maintains, troubleshoots repairs, rebuilds, aligns, and calibrates electronic systems, components, or subassemblies
- Utilizes safety practices/procedures, complies with security regulations, directives, and policies, and maintains a safe and clean work area
- Troubleshoot and repair/replace various subsystems and/or individual components,
10
Experience For Electronic Integrated Systems Mechanic t Resume
- Knowledge in electrical, hydraulic, optical, mechanical, and pressure/sensing subsystems in order to evaluate operational problems, tracing of output signals from these subsystems, and determining the resultant impact to the integrated PLC system. Extensive knowledge of electronic principles, methods, and practices in addition to other extensive
- Inspects, adjust, test operates, replaces worn or defective parts and performs other maintenance tasks relating to lock and dam equipment at regularly scheduled intervals to minimize possibility of major breakdowns and costly delays to river traffic
- Monitors the operation of complex integrated subsystems, analyzes operating trends, proposes preventive maintenance down time to assure continued operating capability and recommends unit replacement or overhaul or engineering evaluation for disposal
- Investigates work related problems such as excessive costs or low productivity and determines causes; implements corrective actions, within authority, to resolve work problems
- Supports and explains management programs to subordinates
- Prepares for and participates in various types of readiness evaluations, inspections, mobilization and command support exercises
- Knowledge of the interaction of the avionics package on the aircraft
- Knowledge of the electronics systems to identify, isolate and repair malfunctions on the aircraft
List of Typical Skills For an Electronic Integrated Systems Mechanic Resume
1
Skills For Electronic Integrated Systems Mechanic Supervisor Resume
- Skill in calibrating and adjusting components such as amplifiers, proximity boxes, generators, and voltage regulators. (Apples to 51h Generation Aircraft Only)
- Skilled in planning tasks for subordinate workers and expanded knowledge in using the equipment, facilities and materials
- ? Prepares effective training plans to maximize Reserve training. Certifies work produced under the USAF Technical Order Program
- Planning, directing, and organizing work assignments for lower grade personnel
- Diagnosing problems and determining needed repairs for malfunctions in electronic integrated systems equipment
- Interacting with aircrew for mission debrief and enhanced system troubleshooting
- Working knowledge of the Technical Order system and other technical publications and directives relating to the section
2
Skills For Electronic Integrated Systems Mechanic t Resume
- Comprehensive knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices
- Make mechanical repairs that required the use of precision measuring and calibrating equipment
- Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting
- Other supporting documents: SF-50, Certificates
- Knowledge of a working system to interpret error data and trace it back through a number of units of the system to locate deficiencies
- Interpret and trace schematics, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE)
3
Skills For Electronic Integrated Systems Mechanic Leader Foreman Ii Meter & Relay Resume
- Read interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade
- Complete working knowledge of the interaction of the avionics package on the aircraft
- Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques
- Interpret and trace schematics, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE)
- Diagnose problems and determining needed repairs for malfunctions in electronic integrated systems equipment
- Responsible for all integrated electronic and electric systems and devices located aboard floating plant
- Serves as section supervisor, exercising supervisory responsibility over assigned integrated systems repair and maintenance work operations
- Serve as section supervisor, exercising supervisory responsibility over assigned integrated systems repair and maintenance work operations
- Coordinate work with supporting or related work functions controlled by other supervisors
4
Skills For Electronic Integrated Systems Mechanic Resume
- Performs work planning responsibilities. Plans use of workers, equipment, facilities, and materials on a daily or by project basis
- Your responses to the Qualifications Questionnaire, and
- Knowledge of programming principles sufficient to analyze aircraft avionics equipment as well as computerized test stations software and software problems and to work with engineering personnel to correct them
- Knowledge of electronic theories and practices of integrated electronic, pneumatic, hydraulic, optical, and mechanical systems of such applications as digital or analog computers, digital display devices which enables the incumbent to understand and predict the effects of subsystem malfunctions on the total function system?
- Skill in calibrating and adjusting components such as amplifiers, proximity boxes, generators, and voltage regulators. (Apples to 5th
- Skill in the set up and operation of computer controlled automated test equipment (ATE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators
- Knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices. Ability to use a variety of electronic, electrical, or electromechanical test and measurement equipment
- Knowledge of personnel management policies, practices, and procedures, including sexual harassment and Equal Employment Opportunity/ Equal Employment Treatment
5
Skills For Electronic Integrated Systems Mechanic Supervisor Resume
- Knowledge of safety regulations, practices, and procedures. Knowledge and practical application of MIS (e.g. CAMS, G0-81) programs
- Read and interpret blueprints, diagrams, sketches, and technical specifications. Ability to plan and organize work assignments to include determining resources required to accomplish mission. Ability to implement sound personnel policies, practices, and procedures. Ability to communicate effectively, both orally and in writing
- Use a variety of electronic, electrical, or electromechanical test and measurement equipment. Ability to interpret and comply with
- Fully qualified Area 1 and 2
- Maintains job proficiency by reading/reviewing new or revised technical orders or related publications and by completing applicable CDC, OJT, and FTD classes as required
- This is a drug testing designated position (TDP). The employee is subject to random drug testing
- Performs shift work with uncommon tours of duty
- USE TEST EQUIPMENT (ELECTRONICS) AND KNOWLEDGE OF THEORY OF ELECTRONICS
- USE AND MAINTAIN HAND TOOLS (ELECTRICAL TOOLS AND TEST EQUIPMENT)
6
Skills For Electronic Integrated Systems Mechanic t Resume
- INGENUITY (ABILITY TO APPLY AND SUGGEST NEW METHODS)
- Knowledge of a wide range of principles, processes, and techniques of trade(s) and/or craft(s) supervised and personnel management policies, practices, and procedures, including sexual harassment and Equal Employment Opportunity/Equal Employment Treatment
- Manage overall directions and coordination of subordinate work activities and functions and implement sound personnel policies, practices, and procedures through one or more levels of subordinate supervisors
- USE OF TEST EQUIPMENT. (ELECTRONICS)
- USE HAND AND POWER TOOLS. (ELECTRONICS)
- INGENUITY. (ABILITY TO SUGGEST AND APPLY NEW METHODS)
7
Skills For Electronic Integrated Systems Mechanic Leader Foreman Ii Meter & Relay Resume
- USE HAND AND POWER TOOLS-ELECTRONICS
- Do the Work of a Electronic Integrated Systems Mechanic Without More Than Normal Supervision (Screen-out Element)
- USE HAND AND POWER TOOLS –ELECTRONICS
- Do the Work of the ELECTRONIC INTEGRATED SYSTEMS MECHANIC Position without More Than Normal Supervision (Screen Out Element)
- Knowledge of electronic theories and practices of one or more complex integrated systems such as fire control, inertial navigation, or automatic landing control systems.Ability to clean work are and/or job site upon completion of work
8
Skills For Electronic Integrated Systems Mechanic Resume
- Skill in the use of standard hand and power tools of the trade.Skill in the set up and operation of computer controlled automated test equipment (ATE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators
- Read and interpret variety of technical data such as schematic diagrams, blueprints, and technical orders relating to the electronic trade
- Knowledge of USAF Technical Order Program and its procedures.Ability to use a variety of electronic, electrical, or electromechanical test and measurement equipment.Comprehensive knowledge of operation, capabilities and limitation of complex electronic systems complicated by a variety of multi components assemblies and devices
- Principles of digital and analog circuits, electro-mechanical devices, solid state devices, digital techniques, synchro/servo operation and integrated circuit theory
- Do the work of an Electronics Integrated Systems Mechanic without more than normal supervision
- Skill in calibrating and adjusting components such as amplifiers, proximity boxes, generators, and voltage regulators. (Apples to 5th Generation Aircraft Only) Skill in the use of standard hand and power tools of the electronics trade
9
Skills For Electronic Integrated Systems Mechanic Supervisor Resume
- Use a variety of electronic, electrical, or electromechanical test and measurement equipment. Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade
- Extensive knowledge of electronic, pneumatic, hydraulic, and mechanical systems to understand and predict the progressive effects of malfunctions throughout the interrelated units
- Thorough knowledge of the application of electronic theories and practices to one or more complex integrated systems such as fire control, power control, environmental, inertial navigation, or automatic landing control systems
- Broad knowledge of radar, digital or analog computers, digital display devices; environmental operation, etc., and specific knowledge of the technology and practices which integrate these components into a total functional system
- Knowledge of mathematics including algebra and basic trigonometric functions to adapt standard formulas to the specific requirements of the integrated system
- Do the Work of an Electronic Integrated System Mechanic without More Than Normal Supervision. (Screen Out Element)
10
Skills For Electronic Integrated Systems Mechanic t Resume
- Knowledge of technical data containing schematic diagrams, signal and data diagrams, test procedures, program information, and mathematical formulas to identify and isolate malfunctions
- Use precision test equipment, test program information, technical data, schematics, signal and data flow diagrams, test procedures and mathematical formulas
- Demonstrates an extensive practical knowledge of mechanical, hydraulic and pneumatic principles as well as system pressurization, dehydration and liquid and gaseous cooling systems
- Comprehensive knowledge of the software controlled test equipment, test results, special purpose test equipment and self-test programs
- A working knowledge of programming principles sufficient to analyze aircraft avionics equipment, Pods and computerized test stations software and software problems and to work with engineering personnel to correct them
List of Typical Responsibilities For an Electronic Integrated Systems Mechanic Resume
1
Responsibilities For Electronic Integrated Systems Mechanic Supervisor Resume
- Use precision test equipment, test program information, technical data, schematic, signal and data flow diagrams and test procedures as well as mathematical formulas
- Prepares effective training plans to maximmize Reserve training. Certifies work produced under the USAF technical Order Program
- ? Performs pretest, operational (functional), or final testing of electronic environmental systems, components, or subassemblies
- Knowledge of hydraulic and pneumatic principles as well as pressurization
- Recommend methods to improve equipment performance, technical data, and maintenance procedures
- Maintain, modify, calibrate, and inspect a wide variety of user test, measurement, and diagnostic equipment
2
Responsibilities For Electronic Integrated Systems Mechanic t Resume
- Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems
- Apply technical data and equipment specifications Integrate multi-system operations and various maintenance alignment procedures
- Installs, modifies overhauls, maintains, troubleshoots repairs, rebuilds, aligns, and calibrates electronic and environmental systems, components, or subassemblies. Performs pretest, operational (functional), or final testing of electronic environmental systems, components, or subassemblies
- Certifies work produced under the USAF Technical Order Program
- Troubleshoot, repair, overhaul, modify, test and service aircraft electrical and weapons systems, sub-systems, components, accessories, and aircraft engines
3
Responsibilities For Electronic Integrated Systems Mechanic Leader Foreman Ii Meter & Relay Resume
- Assist journey level mechanics and specialists as required to maintain assigned aircraft
- Test, inspect, and troubleshoot a variety of specially instrumented, jet fighter/trainer/bomber aircraft integrated avionics and electrical systems, aircraft environmental systems, sub-systems, and components for serviceability, installation, and operation
- Maintain aircraft maintenance records including standard records and records of modifications performed on assigned aircraft, and equipment, following established procedures, technical data, and directives
- Perform ground handling and servicing of assigned aircraft, including the preflight, post flight, launch, recovery, refueling, towing, washing, lubricating, jacking, and other common maintenance tasks
- Installs, modifies overhauls, maintains, troubleshoots repairs, rebuilds, aligns, and calibrates electronic and environmental systems, components, or subassemblies
- Performs pretest, operational (functional), or final testing of electronic environmental systems, components, or subassemblies
4
Responsibilities For Electronic Integrated Systems Mechanic Resume
- Complies with required instruction, guidance and/or training and provides instruction, guidance and training to others. Certifies work produced under the USAF Technical Order Program
- Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates integrated ground or airborne electronics systems
- Uses and maintains hand and power tools, precision measurement tools, and test equipment
- Maintains inspections and maintenance records
- Aircraft Electronic Integrated systems repair and maintenance. Aircraft Inspections/Time Compliance Technical Orders. Performs investigation, troubleshooting and adjustments of aircraft electrical systems, component and accessories malfunctions
- Performs functional testing. Performs aircraft inspections. Performs pretest, operational (functional), or final testing of electronic systems, components, or subassemblies
- Ground operations checks. Accomplishes ground operational checks using ground support equipment and/or by engine run operations, monitoring instruments for malfunctions to determine corrective action on various systems
- Performs pretest, operational (functional), or final testing of electronic systems, components, or subassemblies. Sets up and operates software controlled automated test equipment to run established programs in various test modes to test and troubleshoot integrated systems
- Utilizes safety practices and procedures, complies with security regulations, directives, and policies, and maintains a safe and clean work area. Uses personal protective equipment and complies with all appropriate safety and health directives
5
Responsibilities For Electronic Integrated Systems Mechanic Supervisor Resume
- Prepares effective training plans to maximize Reserve training. Certifies work produced under the USAF Technical Order Program. As required, verifies and certifies work processes and procedures of certified coworkers and trainees and adequacy of work accomplished
- Troubleshoot operational malfunctions and analyze system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams
- Apply technical data and equipment specifications
- Integrate multi-system operations and various maintenance alignment procedures
- Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections
6
Responsibilities For Electronic Integrated Systems Mechanic t Resume
- Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests
- Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary
- Determine the sequence, priority, and time for the performance of operations within the limits of broad work schedules and time limits
- Remove, inspect, repair, overhaul, bench check, reinstall or replace standard and test modified aircraft system components
- Maintain aircraft and maintenance records. Including all standard records and records of modifications performed on assigned aircraft, and equipment, following established procedures, technical data, and directives
7
Responsibilities For Electronic Integrated Systems Mechanic Leader Foreman Ii Meter & Relay Resume
- Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, calibrates integrated ground or airborne electronics systems
- Sets up and operates software controlled automated test equipment to run established programs in various nous test modes to test and troubleshoot integrated systems
- Uses and maintains hand and power tools, precision measurement tools, and test equipment Utilizes safety practices and procedures following established safety rules and regulations and maintain a safe and clean work environment
- Maintains inspections and maintenance record. Prepares all necessary paperwork and/or makes appropriate entries in computerized maintenance information systems
- ? Installs, modifies overhauls, maintains, troubleshoots repairs, rebuilds, aligns, and calibrates electronic and environmental systems, components, or subassemblies
- ? Utilizes safety practices and procedures, complies with security regulations, directives, and policies, and maintains a safe and clean work area
- ? Complies with required instruction, guidance and/or training and provides instruction, guidance and training to others. Certifies work produced under the USAF Technical Order Program
8
Responsibilities For Electronic Integrated Systems Mechanic Resume
- Uses personal protective equipment and complies with all appropriate safety and health directives
- Administration: Supports and explains management programs to subordinates. Plans and establishes overall leave schedule. Determines training needs of subordinates and arranges for its accomplishment. Sets performance standards and makes formal appraisals of subordinates work performance
- Performs pretest, operational (functional), or final testing of electronic environmental systems, components, or subassemblies. Sets up and operates software controlled automated test equipment to test and troubleshoot integrated systems
- Supervise employees involved in the maintenance, repair, and modification of integrated multicomplex avionics systems
- Determine the number and types of workers needed to accomplish specific projects
- Redirect individual workers and resources to accomplish unanticipated work
- Inform higher level supervisors of the need to revise work schedules and re-estimate labor and other resources
9
Responsibilities For Electronic Integrated Systems Mechanic Supervisor Resume
- Support and explains management programs to subordinates
- Set performance standards and makes formal appraisals of subordinates work performance
- Initiate recommendations for promotion or reassignment of subordinates
- Review job descriptions for accuracy and makes necessary changes
- Planning: Serves as section supervisor, exercising supervisory responsibility over assigned integrated systems repair and maintenance work operations. Supervises employees involved in the maintenance, repair, and modification of integrated multi-complex avionics systems. Plans use of subordinate workers, equipment, facilities and materials
- ? Installs, modifies, overhauls, maintains, troubleshoots repairs, rebuilds, aligns, and calibrates electronic systems, components, or subassemblies
- Installs, modifies, overhauls, maintains, troubleshoots repairs, rebuilds, aligns, and calibrates electronic and environmental systems, components, or subassemblies
- Performs administrative responsibilities. Participates with employees in the development of performance plans and recommends them to supervisors
10
Responsibilities For Electronic Integrated Systems Mechanic t Resume
- Applies Equal Employment Opportunity (EEO)/Equal Opportunity Treatment (EOT) principles and requirements to all personnel management actions and decisions, and ensures all personnel are treated in a manner free of discrimination
- Ensures education in, compliance with, and practice of security directives, good safety, and health habits in all work areas. Reserve training: Administers the reserve training and associated programs
- On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles the test stations or ECM Pods and their associated peripherals
- Modifies and updates avionics Pods, support equipment and support software according to applicable technical publications
- Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of line replaceable units (LRUs) from the avionics systems
Related to Electronic Integrated Systems Mechanic Resume Samples
Crane Mechanic Resume Sample
Work Experience
• Harmoniously working with other WCFSI employees and customers, using a partnering, teamwork approach
• Provide a written agreement to be on-call 24 hours, on a rotational schedule basis with a one-hour response time to the job site
• Manages time effectively and notifies supe...
Professional Skills
• Excellent communication skills, in English...
• Five (5) years combined experience as jour...
• Five (5) years combined experience as jour...
Mechanic, Assembly Resume Sample
Work Experience
• Engage in a lean manufacturing environment
• Ensure measurements within specifications
• Perform repairs on aviation wheels and brakes (aviation accessories) per FAA requirements
• Assist in maintaining shop compliance to current regulatory requirements...
Professional Skills
• Basic reading, writing and arithmetic skil...
• Mechanical experience or related aviation ...
• Photo developing experience
Production Mechanic Resume Sample
Work Experience
• Routinely work safely and correctly use PPE. Have a Behavior Based Safety mindset with all tasks performed
• Ensures safe operation of machinery and mechanical equipment by completing preventative and corrective maintenance requirements on motors, pneumatic tools, conveyor systems, and production m...
Professional Skills
• Strong customer service skills and good or...
• Strong time management skills, and can tak...
• Good oral and written communication skills...
Auto Claims Resume Sample
Work Experience
• Pursuant to Company lines of business strategies and good faith claim settlement practices: investigates, negotiates and settles (within authorized limits) assigned claims
• Establishes and maintains positive relationships with both internal and external customers providing excellent customer servi...
Professional Skills
• Excellent organizational, verbal, written ...
• French language skills considered an asset
• Serve as a mentor to less experienced staf...
Mechanical Engineer Design Resume Sample
Work Experience
• Participates as a member of project team of other mechanical hardware engineers and internal and outsourced
• Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and d...
Professional Skills
• Experience in mechanical design for roboti...
• Experience working with any of the followi...
• Experience supporting aviation commercial ...
Specialist Parts Resume Sample
Work Experience
• Responsible for managing the Commodity in the sourcing, supplier selection and relationship building with key suppliers to leverage Eaton’s purchases, reduce cost and improve supplier performance with the support of global and regional procurement organizations
• Take phone calls from dealers on a ...
Professional Skills
• Good time management skills and the abilit...
• Excellent communication skills and the abi...
• Possess solid research skills