Lathe Operator Resume Sample
Work Experience
- Do own Setup and machine production to blueprints or work instructions
- Maintain and sharpen all tooling as required
- Positions parts onto the lathe
- Adjust the speed, feed rate and cutting depth of machine
- Gauges the parts for conformance
- 8 – 10 years experience running CNC lathes
- Experienced in turning, drilling, boring and threading both internal and external
- Set up and operate CNC and/or manual lathe equipment
- 5 – 7 years’ experience running automated lathe equipment (CNC and/or manual)
- Use precision gauges and instruments such as micrometers to determine and follow customers’ specifications
- Operate a Haas CNC lathe with Kanuk controls 100% of shift
- Set up, program, and run machine
- Adjust tooling as necessary
- Work with little supervision throughout shift
- Experience with a CNC lathe required
- Set up and operate manual lathe equipment
- Read and understand drawings, and be able to hold tolerances to .001”required
- 1 – 3 years experience running lathe equipment
- A demonstrated knowledge of good housekeeping and safety skills in their assigned cells
- The demonstrated ability to check the tools correctly and identify which tools need to be replaced
- A working knowledge of blueprints and tolerances
- The ability to fill out and understand all of the SPC charts in their cell
- Capable of doing set ups with minimal support from the Team Leader
- Meet the production requirements for their assigned area
Education
Professional Skills
- Prior machining experience highly desired
- Three to Five years of experience operating a Manual Lathe
- Experience with manual lathes, or other manual machines
- 5+years of CNC experience
- Related machine operator experience
- Operate a Manual Lathe machine
- Experience in a machine shop and/or the equivalent in training in shop practices
How to write Lathe Operator Resume
Lathe Operator role is responsible for training, assembly, general, basic, programming, education, supervision, workday, testing, maintenance.
To write great resume for lathe operator job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Lathe Operator Resume
The section contact information is important in your lathe operator resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Lathe Operator Resume
The section work experience is an essential part of your lathe operator resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous lathe operator responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular lathe operator position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Lathe Operator resume experience can include:
- Selects feed rate, grinding speed, to optimize metal removal according to knowledge of metal properties, abrasives, and shop mathematics
- Understand G & M codes along with conversational programming
- Positions workpiece in lathe, and secures it with clamps and wrenches, verifying positions with instruments such as surface gages and dial indicators
- Applies principles, techniques and safety procedures when operating Lathe
- Familiar with machining Carbon Graphite and 316 Stainless Steel
- Perform all routine maintenance on the machines as required by TPM
Education on a Lathe Operator Resume
Make sure to make education a priority on your lathe operator resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your lathe operator experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Lathe Operator Resume
When listing skills on your lathe operator resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical lathe operator skills:
- A demonstrated ability to work in a team atmosphere
- Sets up, operates and performs preventive maintenance of manual lathe equipment
- Reading Blueprints and drawings
- Keeping machine clean and well lubricated and work area orderly
- Basic math and computing knowledge, to include word processing, and email
- Advanced print reading to include geometric tolerances, finish callouts, and true positioning
List of Typical Experience For a Lathe Operator Resume
Experience For Manual Lathe Operator Resume
- Exposure to moving machinery or nip points
- Exposure to dust, dirt, mud, oils, grease, and/or coolant
- Multiple work sites
List of Typical Skills For a Lathe Operator Resume
Skills For Manual Lathe Operator Resume
- Setup a machine and run the job with minimal supervision
- Meet production requirements as specified
- Able to work 3rd shift ONLY
- Works under general supervision; reports to a shop foreman
- Work 12 hours on your feet (with lunch and 2 breaks)
- Properly use micrometers verniers, calipers and tape measure to determine tolerances required
- Properly use micrometers, verniers and calipers and tape measures to determine tolerances required Ability to calculate using fractions and decimals as well as identify radii required
Skills For Lathe Operator Set Up & Operate Resume
- Experience with manual lathes
- Properly use a tape measure
- Use of steps/ladders: no ladder usage; stepping (stairs and/or platform): periodic up to 20% of the workday Climbing/reaching: up to 20% of the workday, depending on number of set-ups and needed machine adjustments
- Communicate and work with QA on all first piece approval as required
- Under the direction of a supervisor and/or experienced machinist, responsible for quality parts produced on CNC machines such as, but not limited, to lathes and milling machines in a timely, safe and efficient manner