Molding Technician Resume Sample
Adella Wiegand
7951 Breitenberg Ranch,
Los Angeles,
CA
+1 (555) 725 7347
Work Experience
Lead Operator / Molding Technician
11/2015
-
PRESENT
Houston, TX
- Above 5 years’ experience on injection mold tooling fabrication
- Continually improves knowledge of plastic materials, molding process, and auxiliary equipment with the goal of promotion to Molding Technician II
- Involvement and support in the installation, debugging, validation and start-up of new production injection molding equipment
- Monitor parameters required to produce quality product, i.e. Conair system, conveyors, granulators, and auxiliary equipment following start up. Maintain proper molding conditions
- Operate molding equipment according to scheduled requirements of molding work orders and equipment, optimizing available molding capacity
- Assists in the preventative maintenance of auxiliary equipment, including granulators, conveyor, liquid temperature controllers, molds, electrical controls, etc
- Perform minor service to presses and equipment and notifies proper personnel of necessary major repairs or maintenance
- Assist technicians and supervisor with training of new associates
- Responsible for production and quality on a line of machines, and cleanliness and orderly condition of a designated area of the molding department
Molding Technician
01/2013
-
07/2015
Houston, TX
- Performs daily visual inspection of all large tonnage molding machines and makes a written list of the machines requiring service or problem solving
- Participates in technical and mechanical work that is required to keep the machines operating until optimum cycles and acceptable quality have been achieved
- Pulls molds for service and sets up molds to run in molding machines
- Performs mechanical work on machines or mold parts to assemble and disassemble parts. Responds to problems by performing corrective technical or mechanical solutions
- As necessary, pulls molds for service and sets up molds to run in molding machines. Reports any machine and tooling issues to supervisor
- Education: HS Diploma or equivalent training and/or experience
- Physical Demands: Heavy Work – Lifting up to 100lbs
Molding Technician Assistant
06/2006
-
09/2012
New York, NY
- Be familiar with all department inspection procedures and standards. Continually monitor product for acceptable quality to the latest product specification
- Maintenance of records and prepare required reports including: SPC, Q.C. inspection, housekeeping, production downtime reports, mold cavity and cycle time sheets and problem/corrective action logs, etc., in accordance with departmental standards and Good Manufacturing Practices
- Reporting of daily production, machine utilization, preventive maintenance etc. information using the company’s Enterprise Resource Management System (i.e. SAP)
- Observance of all safety and environmental procedures and Good Manufacturing Practices
- Work with limited supervision and maintain an atmosphere of cooperation among and between shifts, mold repair, quality control, assembly, engineering and management to facilitate departmental goals
- Transportation of raw materials and finished goods to and from molding area as needed for production
- Complete operational responsibility over the polymer processing to include
- Read and understand written and verbal instruction
Education
Naropa University
2000 - 2005
Engineer's Degree in Performance
Professional Skills
- Demonstrated technical aptitude, problem-solving, and teamwork skills
- Strong teamwork leadership skills
- Medical device manufacturing related experience; or equivalent combination of training and experience
- Previous Molding Associate experience or Mold tech. apprentice experience
- Have previous experience working in a manufacturing company, preferably with molding
- Several years of molding experience, with three of those years in molding machine and tooling set-up
- Six years of molding experience, with two of those years in molding machine and tooling set-up
How to write Molding Technician Resume
Molding Technician role is responsible for design, equipment, integration, manufacturing, teamwork, security, training, recruiting, purchasing, reporting.
To write great resume for molding technician job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Molding Technician Resume
The section contact information is important in your molding technician resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Molding Technician Resume
The section work experience is an essential part of your molding technician resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous molding technician responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular molding technician position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Molding Technician resume experience can include:
- Professional skills in dimensioning, sketching and manufacturing simple mechanical parts in support of cables, moulds and equipment integration
- Experience in plastic injection molding processing
- Experience as Cabling and Molding Technician in the development of marine and/or underwater components and systems
- Experience on board vessels, participating to ocean engineering, research or other marine and underwater operations
- Injection Molding Technician experience
- Strong root cause analysis/problem solving abilities
Education on a Molding Technician Resume
Make sure to make education a priority on your molding technician resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your molding technician experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Molding Technician Resume
When listing skills on your molding technician resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical molding technician skills:
- Capable of providing assistance to process problems, documenting issues effectively and following up on open issues
- Team player with good attitude and strong work ethic
- Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, and decimals
- Using E-order, Made to Manage systems, Mini-Tab, Excel, Power Point, Word, knowledge of AutoCAD and Solid Works
- Good understanding of injection molding concepts, i.e. scientific molding, process control, filling vs. pack/hold
- Adapt to changing manufacturing priorities, including overtime schedules
List of Typical Experience For a Molding Technician Resume
1
Experience For Injection Molding Technician Resume
- Assist and participate, sharing his/her skills and experience with peers and supervisors, in the preliminary design of new instruments and equipment
- Set up configuration of pressure decay testing and validating that process
- Previous molding process experience
- Setup and operate electromechanical and optical equipment, during Factory, Harbor and Sea tests of underwater and marine equipment
- Operates, maintains and provides technical and process support for the Arburg and Netstal injection molding machines
- Operate the Injection Molding Machine, and make necessary changes to ensure product specifications are met
- Continually performs line audits to ensure good product consistency and maintain acceptable quality levels
2
Experience For Injection Molding Technician IV Mon-fri Resume
- Write and execute validation protocols and technical reports
- Good hand and eye coordination required to perform detailed work
- Applicable industry experience required
- Good understanding of mold design and operation
- Experience with the operations of large molding presses and controls
- 2 QUALIFICATION AND EXPERIENCE
- Experience as Electromechanical Technician in the development and integration of prototype/custom components and systems
- Follow any of the cGMP good manufacturing practices and adhere to ISO 13485:2003 standards
3
Experience For Advanced Injection Molding Technician Resume
- Ensure quality molding output by setting up, troubleshooting and maintaining molding equipment
- Test speciman preparation/equipment adjustment and operation/test data recording and analyzing Engineering data extraction/processing/presentation
- Advanced courses and training relating to thermoplastic injection molding processing
- Set & start up production jobs while using current process procedures and databases for documenting and troubleshooting
- Knowledge of various injection molding tooling and testing equipment
- Maintain optimal mold performance by maintaining balance and resolving all
- Responsible for maintaining accurate production records during their shift for the production line they have been assigned
- Extracts engineering data from various prescribed sources and processes the data following well-defined methods, then presents the data in prescribed form
- Preparationof raw metals: Masking, blasting, adhesive application
4
Experience For Molding Technician Assistant Resume
- Watch production monitoring software for machines stopping, cycles not to standards, color changes and mold changes
- Weigh and document all purging before disposing of them and turn in the documentation to shift supervision
- Completed higher Vocational Training, leading to a formal qualification in Electro-Mechanical or related discipline
- Under limited supervisory direction, provide daily support of processes, materials and equipment for manufacture of medical devices utilizing molding process
- Provides supervisor input regarding employee work performance
5
Experience For Molding Technician Trainee Resume
- Perform mold, tooling and material changeovers
- Make adjustments to molding machines in order to optimize cycle times and quality of parts, and reduce product scrap
- Ensure tooling alignment, obtain proper color match against standard with customer requirements and line clearance procedures are followed
- Records daily production and scrap figures for the shift and reports to Supervisor. Uses manual and computerized systems for recording information
- Provides training instruction to new machine technicians in standard methods of machine operation work and safety procedures
- Revise existing documents, processes, and/or methods to improve processes
6
Experience For Plastic Injection Molding Technician Resume
- Work with vendors and suppliers to procure and install tooling, fixtures, and equipment
- Sets-up, starts-up, troubleshoots, and monitors injection molding machines and related equipment to ensure production
- Thorough understanding of the QuantumCast equipment and process
- Thorough understanding of Urethane materials, Mix ratios and Pigments
- Measure parts using applicable tools / software and report results
- Conducts a variety of tests using established and clearly defined methods
- Notify maintenance of any issues with any equipment in your working area
7
Experience For Lead Operator / Molding Technician Resume
- Perform electro/optical/mechanical integration and cabling of newly developed underwater and laboratory equipment
- Stop production if there is a problem with the product, personnel safety or potential damage to the equipment and/or tool and process
- Mold, core, cavity set-ups
- Set up all auxiliary equipment
- Maintain/ achieve production and quality efficiencies
- Familiarity with process control systems and robotics
- Experience using advanced injection molding technologies including: rapid heat/cool molding (RHCM), gas-assist, injection compression, and/or in-mold-decoration
- Set-up and troubleshoot injection molding equipment
8
Experience For Molding Technician Resume
- Maintain cavitation, cycle efficiency, achieve optimal processing parameters, drive cycle time improvements
- Enter efficiencies in WebbEFF
- Set molds (Operation of crane & fork truck as necessary)
- Process molds from start to finish (Make minor changes to process to insure quality of all products)
- 1st piece Procedure. Measure & visually inspect products for surface & dimension defects in order to ensure conformance to specifications, using precision measuring instruments, to release production
9
Experience For Injection Molding Technician Resume
- Provide ownership & input of injection molding process and equipment for the reduction of defects, overall process improvement, and/or reduction of downtime
- Maintain records & prepare legible reports, including SPC reports, QC inspection reports, mold cavity sheets, production downtime reports, cycle time sheets and problem/corrective action logs in accordance with departmental standards and Quality System Standards
- Perform problem-solving of molding quality defects and correct them
- Assist in various maintenance functions, including but not limited to, preventive, corrective and emergency maintenance on all injection molding equipment
- Troubleshoot and adjust injection molding machine parameters to maintain quality and maximum product output
- Fit and assemble standard parts into assemblies or mechanisms, using hand tools
- Ensure cleanliness and maintain safe work environment within molding department
- Set-up machines, read blueprints, and measure product with calipers and other associated tooling
- Be flexible and adaptable in a changing business environment
10
Experience For Injection Molding Technician IV Mon-fri Resume
- Follow standard and non-standard operating procedures to cut, shape, bond, lay-up, form, inject, cure, trim, drill and make simple repairs to composite parts
- Ensure that department is kept clean and organized, 6S
- Access equipment to troubleshoot problems; require continuous standing, climbing, and bending with occasional kneeling, stooping, and crawling; lifting up to 75 lbs. occasionally; gross & fine motor use skills required; visual & audible inspection of machinery required; good hand-eye coordination; compliance with PPE requirements
- Install and set up injection molds for production
- Work alongside a small team of associates in execution of daily production tasks, work scheduling, training, maintenance, continuous improvement and support the implementation of ISO quality system
- Diagnose, isolate malfunctions and perform simple repairs to molds and small tooling associated with those molds
- Follows all Lock Out/Tag Out procedures and work instructions
List of Typical Skills For a Molding Technician Resume
1
Skills For Injection Molding Technician Resume
- Good understanding of molding machines operations in general. Ability to identify the function of each component in the molding process. i.e. screw and barrel, check-ring, heating zones, thermolators
- Experience in a manufacturing facility handling plastic molds
- Experience in anti-fog hard coating - metalization - injection molding
- Strong knowledge of manufacturing including machine capabilities and efficiencies, etc
- Previous experience running molding equipment
2
Skills For Injection Molding Technician IV Mon-fri Resume
- Validate process’s for Injection Molding Processing
- Experience in injection molding
- HS Dipoloma or equivalent training and/or experience
- Strong knowledge of manufacturing methods and process improvements
- Previous experience in injection molding
- Previous experience with 200-500 ton injection molding machines
- Current molding and/or extrusion operator who has hands on experience with medical component process
3
Skills For Advanced Injection Molding Technician Resume
- Experience with Injection Molding Setup
- Follow all good manufacturing practices (GMP’s) and (HACCP) Practices
- Technical manufacturing experience required
- 2-Plastic Injection Molding experience
- Min. 2 years working experience
- Experience in general shop floor practices, 5S, tidiness and cleanliness
4
Skills For Molding Technician Assistant Resume
- Operate with the highest ethical standards
- Experience with set-ups and troubleshooting for issues such as flash, short-shot, etc., in Plastic Injection Molding environment
- Experienced with two-shot and three-shot molding/overmolding
- Obtain and maintain a valid forklift license
- Set up validated processes
- Working Valve Gate tools, Hot manifolds, Over molding, Insert molding, Double shot molding, Rotating core movement
- Understanding on Anticlinal testing procedures using optical comparator, smart scopes, micro meters, pin gauges, and other measuring instruments,
- Capturing cycle counts from molding presses to enter into a spreadsheet for machine capacity and scheduling
5
Skills For Molding Technician Trainee Resume
- Listening and reaching consensus with others
- Setting of the working parameters of machineries / equipment in accordance with technical department
- Drying material and moisture testing
- Drying/ moisture testing material
- Cleaning hoppers and preparing for material changeovers
6
Skills For Plastic Injection Molding Technician Resume
- Setting up Injection Molding Machines and other equipment
- Troubleshooting and fixing issues with equipment
- Working with the team on preventive maintenance for injection molding machines, automation, and injection molds
- Molding MPS, GPS, QAP and standard operating procedures are followed
- Handling limited leadership responsibilities
- Communicating with Supervisor and other staff as necessary
- Conducting preventative maintenance
- Leading Operators after set-up
- Molding Test conduction
7
Skills For Lead Operator / Molding Technician Resume
- Engineering and maintenance standards and procedures are followed
- Directing / monitoring / executing the production schedule
- Making very detailed SWP’s and WID for individual injection mold change overs
- Placing purchase orders for materials and components required
- Capable of physical mobility including walking, sitting, bending, twisting, standing, pushing, pulling and lifting
- Run Injection Molding Machines (including starting & stopping machine)
- Knowledge of TIG welding, Laser Welding and Steel Polishing techniques
- Look at Lexan and shielding to assure that parts aren’t getting out off into stacking equipment
8
Skills For Molding Technician Resume
- Support QC and PD pillar in analyzing and solving quality issues coming from the human errors
- Capability of learning and developing process parameters for injection molding machines
- Communicates with Quality Control on daily quality issues and performs quality control checking of product by manipulating and visually inspecting random parts
- Watch production monitoring software for machines stopping, cycles not to standards, color changes and mold changes
- Weigh and document all purging before disposing of them and turn in the documentation to shift supervision
- Perform work to a defined plan and be capable of defining plans and organizing work area/tasks and people to meet that plan
9
Skills For Injection Molding Technician Resume
- Advanced molding processing knowledge
- Evaluate tooling and work with Mold Shop to maintain tooling efficiency
- Startup injection molding machines in a fast paced custom injection molding facility in a safe and efficient manner
- Assist the Shift Supervisor in scheduling operators, operator training and perform all supervisory functions in the absence of the Shift Supervisor
- Internal handling on work station, knitting management
- Assists supervisor in their absence by assigning work and ensuring the proper and efficient completion of assignments and processes
- Knowledge of milling machines (traditional and CNC)
10
Skills For Injection Molding Technician IV Mon-fri Resume
- Knowledge of plastic molding processes
- Troubleshoots throughout the molding process to ensure maximum machine utilization, production, and quality
- Observe continuous operation of injection molding machines to ensure that products meet specifications
- Enter notes in shift log book listing issues with molds, machines and all auxiliary equipment
- Enter all scrap into the production monitoring system
List of Typical Responsibilities For a Molding Technician Resume
1
Responsibilities For Injection Molding Technician Resume
- Primary function is to set-up, trouble-shoot, and operate all machine tools and equipment in the molding department
- Previous mechanical experience or ability
- Experience in hydraulics, mechanics & mechanical work
- Maintain cleanliness of work areas by sweeping, dusting and removing trash from the area
- Provides technical training and certification for IMM Technicians on the operation and troubleshooting of the IMM machinery and process
2
Responsibilities For Injection Molding Technician IV Mon-fri Resume
- Perform basic troubleshooting and routine maintenance on Injection Molding Machine and auxiliary equipment
- Provides emergency response for machine and/or process troubleshooting and repair
- Adjust to frequent interruptions and changing schedules based on production needs
- Maintain training requirements for position
- Maintain adequate supply of components for the production line, and high level of housekeeping within own area
- Set up and adjust assembly equipment, auxiliary equipment, and robots to achieve proper assembly, product containment, and product packaging
- Troubleshoot molding process problems
3
Responsibilities For Advanced Injection Molding Technician Resume
- Set up, troubleshoot, and optimize equipment, tooling and processes to manufacture precise medical device component
- Complete and pass required medical screening
- Troubleshoot molding problems
- Statistical sampling plan knowledge/creation
- Material flow/handling Raw materials cycle counts/inventory
- Ability and desire to learn and retain key information about the molding process and production parts
- Intermediate math and reading
- Achieve and consistently perform at required manufacturing rates
4
Responsibilities For Molding Technician Assistant Resume
- Read and comprehend engineering diagrams
- Responsible for packing tubes by hand into trays when necessary
- Responsible for flipping tubes from one tray into another tray by hand when required
- Promote the use of simple visual tools for measuring the scrap levels and their distance from the alarm threshold levels
- Perform basic setup, startup, and operation of plastic injection molding machines
- Basic knowledge of injection molding process and related equipment.
5
Responsibilities For Molding Technician Trainee Resume
- Assist with repairs to injection molding machines
- Knowledge of tool shop machining practices
- Knowledge in molding, plastic injection and footwear is desirable
- Responds to problems by performing corrective technical or mechanical solutions
- As necessary, pulls molds for service and sets up molds to run in molding machines
- Reports any machine and tooling issues to supervisor
- Run a scrap report from the production monitoring system and comment to any large scrap numbers
- Run a down time report from the production monitoring system and comment on any major downtime codes
6
Responsibilities For Plastic Injection Molding Technician Resume
- Read and interpret manuals and drawings of machine tools and equipment is required
- Record all fabrication or machine operating parameters accurately and legibly on parts where required, routing sheets, resident operation sheets, department documentation or terminals to ensure recording completion of work-in-process, inventories, schedules, labor expenditures, and/or other documentation where required
- Organize work areas, plan tasks with team, perform assigned work and meet or exceed cost, quality and schedule needs. Assure product quality
- Train other employees, as needed, to perform assigned tasks
- Trains and develops others in process improvements and injection molding machine (IMM) management, while reducing process variability and addressing IMM equipment reliability issues
- Monitors IMM equipment and process status for new products and new installations
- Creates, reviews, and updates electro/mechanical drawings, operating manuals and procedures, maintenance and calibration procedures, and training manuals as required by the scope of projects that are assigned
7
Responsibilities For Lead Operator / Molding Technician Resume
- Investigates alternative methods and procedures to reduce variability and improve equipment reliability
- Assists in the design of experiments, under operational and developmental conditions, to increase yields and improve IMM machine reliability, repeatability and standardization Vigilant for shop safety, environmental safety, ergonomics and hazardous energy control
- Utilizes Process Excellence tools
- Maintains current knowledge and adhere to provisions of FDA, OSHA, GMP, MPs, ISO 9001, ISO 14001, equipment specifications and process specifications
- Use simple inspection devices such as protractors, calipers, micrometers, tapes, tension or weight scales, gages, etc. to ensure quality of operation processes performed
- Adhere to all Environmental, Health and Safety procedures and regulations
- Perform routine process changes. Follow all SOP/ SWIS accordingly
- Participate in Tier 1 meetings to ensure a successful transition shift to shift
- Participate in 5 Why's program as directed
8
Responsibilities For Molding Technician Resume
- Communicate equipment status changes to manager/ Team Lead
- Complete documentation required per assignment
- Respond to related issues without specific instruction
- Responsible for visual inspection of production for defects based on standard
- Monitor product for any quality issues
- Achieve established daily performance target
9
Responsibilities For Injection Molding Technician Resume
- Get the proper material to the required machine in a safe and efficient manner
- Identify and troubleshoot process, material or equipment issues to minimize downtime and meet production goals
- Work with engineers on continuous improvement projects and new product transfers
- Work with departmental customers to improve material / process quality
- Identify and assist in resolving safety, health, or environmental issues associated with processes or equipment, and maintain compliance with good manufacturing practices
- Train and provide technical support or direction to product builders and other technicians
- Perform routine maintenance and routine process changes
- Follow all SOP/ SWIS accordingly
- General maintenance knowledge required
10
Responsibilities For Injection Molding Technician IV Mon-fri Resume
- Work well with employees from diverse cultures
- Willingness to attend company sponsored trainings and/or educational seminars
- Works in a shop environment with exposure to power tools, machinery, and chemicals. Specific work schedule is coordinated with direct supervisor
- Make machine adjustments, including heat, injection pressure, and cycle times for wide range of plastic engineering materials to ensure proper quality and function of parts
- Ensure part/material containment measures are implemented
- Solve process problems such as flash, short shots, quality of parts
- Use personal computer, dial/digital calipers, gauges, hand tools, hand/power lift trucks, and overhead cranes
- Review production orders scheduled to run on a daily and weekly schedule
Related to Molding Technician Resume Samples
Diesel Technician Resume Sample
Work Experience
• Document, as required, activities and observations of critical technical aspects of engine disassembly and assembly and testing
• Vehicle PM inspections and adjustments
• Oil changes and fluids replenishment
• Adjustments and light repairs including tir...
Professional Skills
• Demonstrated experience monitoring and mee...
• Demonstrated experience monitoring and mee...
• Previous experience maintaining and repair...
Site Technician Resume Sample
Work Experience
• Imaging/maintenance of ePEN workstations by adding print functionality, and troubleshooting hardware issues
• Possess license to work on high voltage / operate cranes and/or forklifts would be beneficial
• AReport to the Site Supervisor
• Driver’s licen...
Professional Skills
• Team Player with excellent communication s...
• Good organisation and communication skills...
• Recognized skills in plumbing, welding, ca...
Technician Level Resume Sample
Work Experience
• Provides on-site Hot Tapping and Line Stop services on client work sites
• Performs Organizational and I-Level Maintenance NDI functions for scheduled/unscheduled maintenance IAW with the CNAFINST 4790.2B, DS2 SOI’s, MIL-STD-410E, and applicable T/M/S aircraft MIMs/Tech Pubs and TDs
•&n...
Professional Skills
• Excellent personal leadership and organiza...
• Leadership skills including planning, sche...
• High level of interpersonal skills with se...
Principal Technical Resume Sample
Work Experience
• Proven ability to deliver on a project’s established scope, schedule and budget
• Provides technical leadership and management for EPRI research projects associated with designing and implementing security technology solutions in an operations technology (OT) environment. This includes implementing...
Professional Skills
• Strong writing and presentation skills. So...
• Demonstrated strong communications (both w...
• Proven ability to communicate effectively ...
Engineering Technologist Resume Sample
Work Experience
• Problem Solving & Initiative: Seeks opportunity to work beyond routine assignments by solving problems of light complexity. Actively seeks out information to increase technical knowledge in area of responsibility. Applies technical knowledge in resolving basic problems encountered in assigned work. Uses initiative in...
Professional Skills
• Demonstrated strong interpersonal and prob...
• Strong interpersonal skills and the abilit...
• Strong teamwork skills which includes coll...
Product & Technology Resume Sample
Work Experience
• Manage regular data imports into IBM’s i2 and iBase
• Day-to-day management of technical operations to support the company’s existing revenues
• Responsible to stand up the Strategic Change and Transformation Management Community of Practice and Advisory Councils CoPs and CoE...
Professional Skills
• Wear personal protective equipment is requ...
• Excellent written and verbal communication...
• Excellent communication, organization, neg...