Operator Technician Resume Sample
Jarrell Kertzmann
89695 Hector Crossroad,
Houston,
TX
+1 (555) 549 0080
Work Experience
Lead Plant Operator Technician
01/2016
-
PRESENT
Dallas, TX
- Control Room Operator: Maintain cook logs for meat and feather cooking during the shift. Monitor the progress of each cook. Responsible for contacting maintenance or electrician when mechanical problems occur. Check all timers on feather and meat cooker
- Pollution Operator: Monitor chlorine solution tanks, cross flow scrubber. Check chemical concentration to make sure it is within standards. Maintain logs. Load bulk trunks as needed
- Meat Operator: Monitor product flow from perc-pans to surge hopper through expellers
- Fat Room Operator: Monitor raw product bins at all time. Monitor fat tank levels, when levels get to ¾ tank full, operator is to filter dirty fat, run filter cake out and repeat this procedure throughout the day as many times as necessary
- Grinding Room Operator: Monitor product flow through grinding room. Check shaker screens and disintegrator screens making sure there are no holes on the screens. Dump barrels, gondolas etc. Monitor levels on outside storage bins. Load raw feathers into feather table when necessary
- Feather Operator: Monitor the flow of raw feather into feather cooker. Clear drops on feather cooker. Monitor pressure inside feather cooker and run moisture checks every hour so that moisture does not exceed 3%
- Unconditioned work space (i.e. warm in summer, cool in winter). Hazards require the use of personal protective equipment (i.e. hardhat, safety glasses, hearing protection, and safety shoes). Dry ice is extremely cold, and therefore requires that gloves be worn when directly handling dry ice
- Supports Operations and Maintenance activities as directed by the Managing Director and Production Manager
- Shall provide backup operator coverage as required for operations shift vacancies requiring shift coverage on days, nights and weekends
Operator Technician
05/2012
-
09/2015
Phoenix, AZ
- Assist the Production Manager with maintaining spare part inventories and materials ordering necessary to maintain the facility including outage planning
- Assist with preparation of operations budgets
- Assist with contractor planning, scheduling, and monitoring requirements
- Provides both planned and unplanned outage over-site as directed
- Participates in the facility’s safety training and compliance programs
- Maintain a valid driver’s license
- Safely operate the assigned area of the refinery to meet the objectives established by the area superintendent and shift supervisor
- Perform scheduled rounds, equipment checks, and log operating data
- Execute directions from the Lead Operator Technician
Operator / Technician
10/2009
-
01/2012
Los Angeles, CA
- Turn valves and adjust controls to meet specified temperatures, pressures, flow, and levels to meet product specifications
- Perform routine light maintenance activities such as lubrication of rotating equipment
- Observe process equipment to detect malfunctions, leaks, etc
- Knowledge of basic Lean principles and tools including 5S, Standard Work and AM Steps 1-3
- Basic equipment/mechanical troubleshooting knowledge and tool usage for changeovers, minor adjustments, and minor repairs
- Understand work center training and safety requirements through JSEA’s, Process Maps, and Work Instructions
- Connects manifold to cylinders
- Fills out and attaches warning and other identification tags, labels, or decals to cylinders
Education
Nebraska Wesleyan University
2003 - 2008
School's Degree in Chemistry
Professional Skills
- Receives training but uses some specialized skills where technical experience can be applied to assigned tasks. Assists more experienced Operator Technicians
- Computer skills to include PI, experience with computerized maintenance management systems (CMMS), spreadsheets, power point, word processing and databases
- Excellent documentation skills and management of batch records/production paperwork
- Related experience and/or training or equivalent combination of education and experience
- Good computer, numeracy, literacy and verbal communication skills
- Able to operate effectively as part of a team and to work proactively on their own
- Using heavy equipment (Loader), transports/stock piles sulfur to allow drainage prior to loading
How to write Operator Technician Resume
Operator Technician role is responsible for training, mechanical, basic, manufacturing, database, security, reporting, design, research, events.
To write great resume for operator technician job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Operator Technician Resume
The section contact information is important in your operator technician resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Operator Technician Resume
The section work experience is an essential part of your operator technician resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous operator technician responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular operator technician position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Operator Technician resume experience can include:
- Locally operate pumps, valves, pipeline pigging systems and other facility equipment in consultation with the Control Centre Operator (CCO)
- Operates a variety of mechanical equipment including conveyors, electrical switchgear, etc
- Understand Statistical Process Control – translating product specifications to finished goods
- Operates forklift, pallet jack and other warehouse equipment to safely load/unload compressed gas and liquid cylinders to and from delivery vehicles
- Strong matematical and analytical abilities
- Act and drive the operation forward using the VPO tools and processes to delivers results whilst maintaining excellent housekeeping standards
Education on an Operator Technician Resume
Make sure to make education a priority on your operator technician resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your operator technician experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Operator Technician Resume
When listing skills on your operator technician resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical operator technician skills:
- Maintain a thorough knowledge of the operation and equipment in order to effectively and safely cope with emergency situations
- Mechanical maintenance experience with a variety of areas, including hydraulics, pneumatics, motors, pumps, lubrication, welding, pipefitting
- Positions cylinders in manifold racks and operates equipment for pumping or repackaging gases into cylinders
- 3 x years’ experience in a reputable manufacturing industry
- 3 x years’ experience in a reputable manufacturing industry preferably in a tobacco related industry
- Experience interfacing with military personnel and government customers
List of Typical Experience For an Operator Technician Resume
1
Experience For Plant Operator Technician Resume
- Strong mechanical aptitude and basic understanding of chemistry, physics, electricity and mathematics
- Basic certifications/licensures. Valid state driver’s license
- Good mathematical and analytical ability
- Begins to achieve primary certifications/licensures. Valid state driver’s license
- Strong understanding of safety and health procedures including but not limited to LOTOT, Confined Space Entry and Hot Work
- Combination of experience with education
- Operates heavy equipment loaders, dozers, forklift, water trucks, etc. and performs pre-use inspections and 10-hour services on all vehicles
2
Experience For Lead Plant Operator Technician Resume
- Using a loader, loads concrete Hopper
- Using a loader, loads distressed sulfur (as needed)
- Writing necessary work orders and permits
- Weighs trucks before and after loading/unloading and directs trucks into proper loading position/where to go for offloading
- Basic understanding or familiarity with safety and health procedures including but not limited to LOTOT, Confined Space and Hot Work
- Responsibilities specific to Terminal facilities includes performing product quality and measurement analysis, tank gauging, and sample collection
3
Experience For Operator / Technician Resume
- Responsible for safely monitoring the facility’s operating equipment
- Basic equipment/mechanical troubleshooting knowledge and tool usage for changeovers,
- Conduct laboratory analytical testing for product quality assurance/ control; and routine tests
- Maintain and refill stock (packaging, bottle lids, preforms etc)
- Lifts, carries and uses equipment weighing up to 45 pounds
- Maintains up-to-date awareness of all Unit chemicals (e.g., lubricants) and their handling
4
Experience For Blending Operator / Technician Resume
- Inspects sulfur processing conveyors
- Application of safe systems of work
- General maintenance of plant dependent on individual’s competence
- Maintain professional attitude, an appropriate level of communication and courteous behaviour to all colleagues, host site personnel, contractors, and visitors to the CHP site
- To follow the company procedures and standards as expressed in the Company Handbook
5
Experience For Operator / Technician Contractor Resume
- Journey-level; generally 6 years directly related experience including understanding of health and safety regulations, and previous experience working with and around hazardous energy, chemicals and waste materials including knowledge of safe handling, storage, and transport
- Conduct equipment and equipment system inspections and routine maintenance; prepare equipment for maintenance activities as required
- Senior-level; generally 10+ years directly related experience including understanding of health and safety regulations, and previous experience working with and around hazardous energy, chemicals and waste materials including knowledge of safe handling, storage, and transport
- Advanced certifications/licensures. Valid state driver’s license
- Experience in the field of construction
- Able to complete minor preventative maintenance tasks and assist with complex maintenance activities
- Journey-level; generally 3 to 5+ years directly related experience including understanding of health and safety regulations, and previous experience working with and around hazardous energy, chemicals and waste materials including knowledge of safe handling, storage, and transport
6
Experience For PC Operator Technician Resume
- Swab/prepare control point monitoring samples in the manufacturing plant and outgoing tankers
- Routinely prepare and review test data, including tracking and trending of data, and process capability evaluation
- Unloads previous day’s empty cylinders and loads all route trucks for next day’s deliveries as shown on the next day’s drivers’ load sheets. Moves levers and presses pedals to drive forklift and control movement of lifting apparatus
- Assist in compilation of Antibacterial Batch Release Records, reviewing for documentation accuracy, and providing
- Performs all responsibilities in keeping with the company’s safety policies and procedures
7
Experience For NOC Operator / Technician Resume
- Errors can have immediate incremental impact on department or facility, and/or discovered in succeeding operations where work is verified or checked
- Perform physical and chemical testing of raw materials, in-process and finished product samples in accordance with
- Coordinate sample collection and shipment for stability testing at Colgate Research and Technology Center
- Troubleshoot, maintain, and calibrate lab equipment as required
- Provide product release/hold notification to Colgate distribution system and SAP transactions
- Provide support to facility to resolve nonconformance issues and identify root causes and corrective actions
- Support special Quality and continuous improvement projects for facility
- Work well under pressure and handle strict deadlines
8
Experience For Shift Operator Technician Resume
- Minor adjustments, and minor repairs
- Operate, maintain, install and repair (automatic and semi-automatic machines) equipment including pumps, valves, gates, mixers, chemical feed, dust collector and odor control systems
- Monitor control panels, adjusts valves and gates
- Monitor flow meters, gauges, flow ratios, pressures and related controls through instrument panels, computer terminals and programmable logic control units in assigned area
- Monitor and record operating conditions observations and data in area shift log
- Ensure conformance to process specifications
- Diagnose basic operational problems and take corrective action per procedure
- Verify and report suspected malfunctions and variances to supervisor or designee and takes corrective actions. Performs routine and preventative maintenance and other tasks as assigned
9
Experience For R Operator / Technician Resume
- Perform grab and go field tests in order to adjust process chemical dosages for process
- Wear personnel protective equipment (PPE) as defined by policy regulation, work practices, customer
- Maintain a safe, neat and clean work environment this includes: work area and equipment
- Ensure records are accurately maintained and that all required procedures are followed in order to comply with local, state and federal regulations
- Perform physical and chemical testing of raw materials, in-process and finished product samples in accordance with the Quality Plan and standard operating procedures. Approve materials and finished products based on test results
- Assist in compilation of Antibacterial Batch Release Records, reviewing for documentation accuracy, and providing feedback to teams where required. Perform initial review of release bundle where needed
- Has the ability to smell odors and see colors in order to perform the smell, color & appearance testing is required
10
Experience For Primary Operator Technician Resume
- Comply with MarkWest safety guidelines
- Represents Airgas Inc. in a professional and dignified manner at all times
- Manages paperwork to Department of Transportation (DOT), Food & Drug Administration (FDA), Occupational Safety & Health Administration (OSHA), and Airgas standards. Completes quality control sheets as required
- Visually inspects flame pattern, header pressure, and fuel gas consumption in furnaces, identifies hot spots and other problems in furnace
- Report upset conditions or other anomalies in plant status to the Operations Manager or Lead Control Room Operator
List of Typical Skills For an Operator Technician Resume
1
Skills For Plant Operator Technician Resume
- Experience performing preventative maintenance on hydraulics, pneumatics, motors, and pumps
- Experience with Lean Manufacturing principles and applications
- Be able to operate test and maintenance equipment to include hydraulic lifts, safety harnesses, climbing equipment,
- One (1) year experience in a production/manufacturing environment
- Experience driving a forklift
- Experience in a plant or manufacturing environment
- Connecting/Disconnect loading arm and loading hoses
2
Skills For Lead Plant Operator Technician Resume
- Reporting and repairing if applicable, any unsafe condition or situation that would compromise the integrity of any Markwest employee, equipment or locations
- Decontaminating removed equipment for repairs or disposal
- Maintaining accurate condensate records as needed
- Managing condensate levels at any or all compressor stations in his area
- Making any or all repairs as deemed reasonable and safe to do
- Maintaining the company issued vehicle at all times to ensure safety
3
Skills For Operator / Technician Resume
- Maintaining the tools and equipment issued
- Maintaining clean and safe work environment
- Functioning as only operator on shift
- Monitoring data logs to check for proper operation and setups during testing
- Loading and unloading wafers on ATE systems
4
Skills For Blending Operator / Technician Resume
- Maintaining scheduled preventative maintenance programs
- Maintaining daily dehi and plant reports
- Carrying out and recording quality checks
- Using route cause analysis to diagnose and escalate any faults
- Performs basic equipment maintenance (adding lube oil, water, tightening valve packing, changing filters and steam traps, clearing equipment, etc.)
5
Skills For Operator / Technician Contractor Resume
- Monitors field equipment using electronic test equipment including hand held monitors and computer monitoring equipment
- Essential job function requires the routine lifting and manipulation of dry ice blocks ranging in weight from 5 – 50 pounds each
- BS. in computer engineering or equivalent training
- Proficient using PC, word processing and spreadsheets
- Paint infrastructure or process equipment in immediate and surrounding work areas consistent with department housekeeping and safety requirements
6
Skills For PC Operator Technician Resume
- Performs all required safety tests (i.e., air monitoring) before and during repair work and returns unit to ‘on-line’ condition
- Ship mooring and unmooring
- Warehouse inventory, stocking the lab
- Assist with safety shower and gas horn testing
- Waste drum labeling and inspections
- Warehouse sweeping, end of the month inventory
- Perform routine water chemistry testing if and when directed by the Plant Chemist
- Ability and willingness to routinely lifting 50 pounds
7
Skills For NOC Operator / Technician Resume
- Has in-depth knowledge of basic analytical testing and laboratory procedures
- Work 12 hour shifts, nights, weekends, holidays, and rotating shifts
- Perform regular housekeeping and maintain general cleanliness in work area
- Move bags of raw materials weighing up to 50 lbs
- Make entries in the Operating Log and approve and issue Tag-outs as required
- Interface with design and maintenance/engineering personnel, to assure efficient installations and repairs and to maintain equipment documentation integrity
- Assist maintenance/engineering with machine repairs or PMs
- Interpret specification sheets and technical literature for mechanical and hydraulic components for the purpose of installation and/or troubleshooting
- Work shift work weekends on a rotating basis “if needed”
8
Skills For Shift Operator Technician Resume
- Communicates with console supervisor to remain informed of existing process conditions and relay any changes made or needed
- Subject to pre-employment drug testing and background check
- Plant & control system first line fault diagnosis and reporting
- Basic understanding of liquid hydraulics
- Inspect fire extinguishers, fire doors hoses and ladders
- RSO required with an associated cost to employee of $90.00
9
Skills For R Operator / Technician Resume
- Current drug/alcohol screen with fit test
- Knowledge of power plant safety procedures, especially in such areas as
- Start, stop, regulate, monitor and control auxiliary boilers, turbine generator auxiliary equipment, and all plant auxiliary equipment, usually using controls located directly on the equipment
- Perform equipment switching and lockout tagout
- Write, review and revise operating and related procedures
- Observe, record and interpret indications from instrumentation and control systems located directly on power plant systems
- Assist in the investigation of plant problems, incidents, accidents, and unusual events and provides analyses, recommendations, reports and appropriate follow-up plans
- Determine the need for, and performs routine operational tests and adjustments on, all power plant systems and components, as necessary
- Check daily consumption rates of chemicals, fuels and water, monitors supply inventories and initiates action to replenish them when appropriate
10
Skills For Primary Operator Technician Resume
- Perform routine basic preventive and predictive maintenance on all systems and equipment and supports corrective maintenance efforts on selected equipment when properly trained or supervised
- Maintain logs, records, and data sheets
- Prepare reports and other administrative documents related to the business of steam and power production
- Display professional behavior at all times
- Determine the need for, and performs routine operational tests and adjustments on, all power plant systems and components,
- "Great place to work with great growth potential" - Director, Atlanta
List of Typical Responsibilities For an Operator Technician Resume
1
Responsibilities For Plant Operator Technician Resume
- Complies with all safety requirements, safety procedures and rules as prescribed by Airgas Inc., State and Federal agencies. Working safely is our number one priority
- Operates forklift, pallet jack and other warehouse equipment to safely load/unload compressed gas and liquid cylinders
- Oil/gas experience in an operating or maintenance capacity
- Configures, operates and maintains assigned systems during satellite support, test, and maintenance activities
- Performs preventative maintenance according to Preventative Maintenance Inspections (PMI) manuals and assists in
- Corrective maintenance according to equipment manuals
- Time point testing of Reliability units, characterization of new products on bench and on ATE
- Ensure any injury or accident is reported immediately
2
Responsibilities For Lead Plant Operator Technician Resume
- Receive and respond to electrical, steam and fuel dispatcher's orders and requests
- Operate control panels to regulate the load on the HRSG and turbines and to maintain proper steam temperature and pressure, feedwater and fuel supply and efficient combustion conditions
- Perform emergency operations to maintain electric service and safeguard station equipment
- Provide direction to Power Block Operators (PBO's) to effect changes in plant conditions and chemistry
- Complete other tasks as requested by the Operations Manager
- All employees have the responsibility to both the customer and their co-workers to do the job right the first time and to ensure the customer’s needs are being met
- Assist maintenance and operating team members in troubleshooting and performing minor repairs on production equipment. Takes initiative to participate in continuous learning opportunities. Seeks knowledge of others in the work team to develop skills. Understands how to access EAM (Equipment Asset Management) to issue a work request notification
3
Responsibilities For Operator / Technician Resume
- Confirms availability of packing materials needed for current and next scheduled production run. Coordinates with others on operating, planning and logistic team to ensure availability of materials. Understands how to access SAP/ZQUAL for production schedule and available materials
- Understands the parts storeroom storage system and can locate parts as needed to support plant needs. Assist operating, maintenance and engineering team members in locating parts needed for equipment
- Participates in scheduled review of team production performance and uses information to support and drive continuous improvement. Understands, supports and applies continuous improvement tools such as Root Cause Analysis in identifying opportunities to resolve issues and improve results
- Every team member has responsibility to fully utilize our resources to optimize our productivity and to contribute and meet the needs of our customers, businesses and each other
- Demonstrate personal leadership, including demonstration of Colgate-Palmolive Managing with Respect values
- Cylinders requiring maintenance or repair are removed from service until corrected. Reports any equipment or facility defects to supervisor
- Assets and other facilities in Sumas district when
- Assistance on major pipeline/station projects
- Replaces safety valves on cylinders and removes and replaces labels on cylinders as required
4
Responsibilities For Blending Operator / Technician Resume
- Performs all required prefill and post-fill inspections and tests before cylinders are released
- Responsible for personal safety, the safety of co-workers and promoting a safe work environment; responsible for carrying out all work activities in compliance with state and federal environmental regulations
- Takes personal leadership role in daily activities, task planning, incident investigations and work performance as they relate to the LYB’s key focus areas of Safety, Environmental, Quality, Reliability, and Cost of operation
- Responsible for gaining and maintaining process knowledge of the unit and process changes to the unit, to enable effective operation and detection of unusual process conditions; uses knowledge to troubleshoot and resolve issues
- Responsible for taking ownership of the unit to ensure production rates and right-first-time results are maximized and to ensure the unit is maintained in proper operating condition
- Responsible for taking readings, utilizing plant data/control systems and observing process conditions on a continual basis to maintain good control of the unit
5
Responsibilities For Operator / Technician Contractor Resume
- Provides accurate and timely communication to co-workers, and works with other functions to improve individual and unit performance. Provides ideas, raises concerns, and promotes an environment in which everyone is treated with respect
- Initiates, directs and verifies completion of all operational events during the acquisition, tracking and commanding functions of each operational support
- Responsible for performing minor maintenance on equipment and enters SAP work notifications on equipment in need of maintenance
- Responsible for placing systems in a safe condition for maintenance work, supporting maintenance activities and communicating status to the shift supervisor and coworkers
- Education in oil/gas technology or other technical fields is considered an asset
- Maintains cognizance of station equipment status
- Assists with repairs and alignment of equipment IAW TOs/TMs or commercial manuals
6
Responsibilities For PC Operator Technician Resume
- Assists with Preventive Maintenance Inspection (PMI) activities
- Prepares daily activity log entries in appropriate electronic systems
- Performs all required systems administration on mission related equipment
- Responsibilities specific to dock facilities includes operation of equipment related to transfer of liquid petroleum to and from marine vessels
- Basic mechanical, electrical and instrumentation knowledge as applied to industrial process systems
- Routine machine maintenance and basic repairs
- Support Engineers to improve line reliability
7
Responsibilities For NOC Operator / Technician Resume
- Uphold Food Safety and Health And Safety Regulations
- Work under pressure and problem solve
- Able to work as part of a team or alone, with little supervision
- Operate, Install, repair, inspect, test, calibrate, adjust, maintain, modify, clean, service and/or lubricate machines, equipment, electrical controls, structures and facilities
- Diagnose and correct problems and proactively seek elimination of wastes and failures
- Interpret mechanical, hydraulic and civil drawings and schematics
8
Responsibilities For Shift Operator Technician Resume
- Mark up prints to accurately reflect equipment current condition
- Cut, weld, braze and fabricate tools, materials and equipment
- Perform and document preventive maintenance checks, inspections and repairs
- Organize and maintain work areas, tools and equipment for clean, efficient, and orderly operations
- A positive attitude and willingness to learn/change when necessary
- Determines mechanical integrity of trucks/railcars
9
Responsibilities For R Operator / Technician Resume
- Takes routine and special samples, i.e., coke and sulfur
- Observes all facility and Government health/safety rules and regulations pertaining to operation of equipment, loading and movement of trucks and railcars, movement and stockpiling of product and workplace behavior
- Maintains good housekeeping including shoveling, sweeping, area wash down, picking up debris, weed abatement, etc., as necessary or as directed; requires the use of small hand tools, brooms, shovels, water hoses, etc
- Performs minor maintenance work such as adjustments and small repairs of plant equipment and vehicle changing of filters, inspection and cleaning
- Initiates work notification(s) for the repair of equipment by Maintenance Department
10
Responsibilities For Primary Operator Technician Resume
- Prepares and assists in the isolation of equipment (small 2” – 3” blinds, disconnect switch or breaker)
- Signs work orders ‘on’ and ‘off’ in accordance with plant safety procedures
- Cleans train tracks before and after railcar movement
- Enter gauges, line samples, tank transfers, truck receipts, and truck shipments into automation daily report
- Take equipment out of service, prepare equipment for maintenance and put equipment back in service
- Operates forklift, pallet jack and other warehouse equipment to safely load/unload compressed gas and liquid cylinders to and from delivery vehicles using store order sheets/manifests
- Performs visual inspections of empty cylinders
Related to Operator Technician Resume Samples
Analysis Technician Resume Sample
Work Experience
• Ensure work is performed in accordance with company procedures and regulatory agencies’ regulations
• Performs basic failure analysis of optoelectronic devices using a parameter analyzer and optical microscopes
• Develops failure analysis reports in writing
• ...
Professional Skills
• Demonstrate excellent written and oral com...
• Strong aptitude in word processing, spread...
• Flexibility to handle sudden changes to pr...
Technical Operator Resume Sample
Work Experience
• Control Room and Ingest
• Perform a variety of tasks to move components, mass, and finished goods between the Production floor and Staging area
• Break down equipment, clear jams, and maintain running lines
• Maximising the performance of all equipment ...
Professional Skills
• Physical Requirements – Lifting, Standing,...
• Excellent IT skills and the ability to acq...
• Strong communication skills and good organ...
Technician Level Resume Sample
Work Experience
• Provides on-site Hot Tapping and Line Stop services on client work sites
• Performs Organizational and I-Level Maintenance NDI functions for scheduled/unscheduled maintenance IAW with the CNAFINST 4790.2B, DS2 SOI’s, MIL-STD-410E, and applicable T/M/S aircraft MIMs/Tech Pubs and TDs
•&n...
Professional Skills
• Excellent personal leadership and organiza...
• Leadership skills including planning, sche...
• High level of interpersonal skills with se...
Principal Technical Resume Sample
Work Experience
• Proven ability to deliver on a project’s established scope, schedule and budget
• Provides technical leadership and management for EPRI research projects associated with designing and implementing security technology solutions in an operations technology (OT) environment. This includes implementing...
Professional Skills
• Strong writing and presentation skills. So...
• Demonstrated strong communications (both w...
• Proven ability to communicate effectively ...
Engineering Technologist Resume Sample
Work Experience
• Problem Solving & Initiative: Seeks opportunity to work beyond routine assignments by solving problems of light complexity. Actively seeks out information to increase technical knowledge in area of responsibility. Applies technical knowledge in resolving basic problems encountered in assigned work. Uses initiative in...
Professional Skills
• Demonstrated strong interpersonal and prob...
• Strong interpersonal skills and the abilit...
• Strong teamwork skills which includes coll...
Product & Technology Resume Sample
Work Experience
• Manage regular data imports into IBM’s i2 and iBase
• Day-to-day management of technical operations to support the company’s existing revenues
• Responsible to stand up the Strategic Change and Transformation Management Community of Practice and Advisory Councils CoPs and CoE...
Professional Skills
• Wear personal protective equipment is requ...
• Excellent written and verbal communication...
• Excellent communication, organization, neg...