Tech-electrical Resume Sample
Work Experience
- Physical requirements are: sitting, walking, standing, extensive use of stairs, and access to remote structures
- Perform functional and diagnostic tests to determine root cause of malfunctions and recommend repairs to established manufacturer’s tolerances
- Determine routing of wires and conduits and the location and method of installing such electrical units as switches, outlets, junction boxes, rectifiers, transformers and generators. Compute wire gauge, power and load limit requirements using charts and handbooks, considering such factors as amperage, load, and distance to power supply
- Install and program PLC’s, read ladder logic diagrams, understand PLC principles and design considerations
- Use laptop computers to troubleshoot logic circuit problems and to program PLC’s
- Able to read blue prints, schematics and wiring diagrams
- Able to read ladder logic
- Knowledgable of electric meter and megger usage
- Have a willingness to operate individually or within the constraints of a team environment
- Experience troubleshooting 480 volt, 120 volt and 24 DC voltage systems
- Read and interpret documents such as schematic diagrams, safety rules operations and maintenance instructions, manufacture’s manuals and similar documents
- Develop, check out, maintain, adjust, operate, troubleshoot and modify electronic control, instrumentation, data acquisition and electro-mechanical systems
- Fabricate and maintain new instrumentation, data acquisition, and control consoles, as required to support test programs
- Read and interpret documents such as electronic schematic diagrams, safety rules, operations and maintenance instructions, manufacturer’s manuals and other similar documents
- Perform work and maintain work area in a neat, orderly, and safe manner
- Troubleshoots problems in programmable controllers. Replaces inoperable sections of PLC’s (Programmable Logic Controller)
- Uses a variety of electrician’s tools including measuring and testing instruments
- Utilize multi meters (volts, amps and resistance)
- Experience and/or education related to PLC's
- Experince troubleshooting 480 volt, 120 volt and 24 DC voltage systems
- Assure all work performed conform to all applicable state and local codes and NEC
- Maintain a clean and organize work area and clean up after every job
- After 5 week employment, billable hours goal to meet 85% efficiency
- Proficiently work with outside contractors on special projects
Education
Professional Skills
- Strong problem solving, judgment, and critical thinking skills
- Metering (volumetric and mass measurement) and control devices
- Responding to downtimes and show element quality repair related issues and ride recovery related issues
- Collaborating with production and maintenance employees to solve problems and improve reliability of drives systems
- Interface with PdM specialists for condition monitoring, data sampling, analysis and follow-up
- Office environment & 75% manufacturing environment
- Climb ladders and scaffolding
How to write Tech-electrical Resume
Tech-electrical role is responsible for security, training, manufacturing, design, digital, travel, government, software, automation, collaboration.
To write great resume for tech-electrical job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Tech-electrical Resume
The section contact information is important in your tech-electrical resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Tech-electrical Resume
The section work experience is an essential part of your tech-electrical resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous tech-electrical responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular tech-electrical position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Tech-electrical resume experience can include:
- Perform test and fine-tuning paper machine in order to meet the customer’s technical specifications and process optimizations
- Continuously improve drives systems to meet or exceed standard operating protocol
- Supports emergency troubleshooting, repairs, and corrections for drives systems
- Provides technical support for troubleshooting equipment problems and breakdowns
- Develops standard job planning and specifications
- Manages spare part inventory as it relates to specification, quantity, storage, obsolescence and end-of-life planning
Education on a Tech-electrical Resume
Make sure to make education a priority on your tech-electrical resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your tech-electrical experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Tech-electrical Resume
When listing skills on your tech-electrical resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical tech-electrical skills:
- Strong Computer/math Skills
- Experienced in preventative/predictive maintenance systems with a strong emphasis on drives and control systems
- Demonstrated abilities at test facility/test article build-up, activation and active participant of test team with comprehension of propulsion testing outcome
- Performing modifications to ride vehicles or show equipment as directed by the Universal engineering department
- Perform scheduled integrity testing of various critical safety and protective devices per D.O.T FCR 195
- Perform installation, problem diagnosis, fault analysis and repair of computerized control systems relative to the following
List of Typical Skills For a Tech-electrical Resume
Skills For Tech-engineering Tech VI Electrical Resume
- Frequent travel up to 50 percent. Valid driver’s license required to operate company-owned or leased vehicle
- Demonstrated experience on electro-mechanical drives systems, process control equipment and PLC’s
- Logging completion of inspections, corrective action, and/or repairs made and listing applicable parts used
- Medium Voltage Switch Gear and Power Handling Equipment
- Electronic tank gauging systems
- Apply knowledge of wire color codes, symbols, layout sheets, wiring diagrams, schematics, technical orders, and manufacturer’s specifications
Skills For Test & Evaluation Lab Tech-electrical Resume
- Walk six hours per day
- Bend and stoop six hours per day
- Push and pull frequently throughout the day
- Walk up/down stairs frequently
- Stand seven hours per day
Skills For Electrical Engineer Tech Resume
- Wear PPE gear six hours continuously (steel toe shoes, safety glasses, hard hat, gloves)
- Tolerate extreme cold/heat for three hours continuously
- Plans and accomplishes a complete range of operational assignments and tasks that are generally routine to moderately complex related to installation, integration, maintenance and repair of the instrumentation, electrical, electronic systems and equipment that control pipeline operations
- Applies a general knowledge of instrumentation and control devices and equipment to perform installation maintenance and repair and of electronic field communications equipment. Ensures this equipment integrates into the main Supervisory Control and Data Acquisition (SCADA) system for control of pipeline operations
- Performs programming of Programmable Logic Controllers (PLC) field units utilized in pipeline and terminal operations. Performs installation, set up and troubleshooting of Stratos satellite communication equipment
- Works closely with the pipeline maintenance, operations and engineering groups during capital projects and new construction. Performs cost estimates and orders materials for new construction or capital projects. Oversees the work of third-party contractors on capital projects or new construction
- Manages a spare parts and materials inventory in an economical and prudent manner
- Competent in the use of WonderWare software, Applications Server, Microsoft Terminal Services, Microsoft Word and Excel
Skills For Tech-electrical Lead-level Resume
- Make telephone and direct personal contact with internal and external personnel
- Provide assistance to Technical and Operations Supervisors in coordinating I & E maintenance activities for pipeline facilities repair, installation and modifications
- Coordinate and support field I & E teams; includes both company and contract work groups
- Provide proactive management in scheduling and coordinating field related I & E activities for pipeline and facilities and preparation of data for entry into the company LMEP and Maximo program
- Assist in design and planning of all new customer connections and optimization of both new and existing L.A.C.T., field data, storage and terminal facilities where automation or electronic management is required
- Ensure installations adhere to corporate policies, procedures, applicable codes and regulations
Skills For Advanced Industrial Maintenance Tech-electrical Resume
- Manage technical projects at the field level and coordinate material and resources
- Control systems (PLC, Relay Logic, etc.)
- Read and draw basic electrical schematics
- Basic knowledge of local area network
- Operations computer hardware and associated equipment
- Supervise and/or repair mechanical problems on pipeline equipment
- Lead Root Cause Failure Analysis, implement preventative/predictive maintenance
- Performing daily, weekly, monthly, semi-annual and annual inspections and preventative maintenance towards R/S control systems. Inspections include testing, verification and/or calibration of applicable control systems
- Develop and implement specific drives systems improvement programs and reliability strategies
Skills For Maintenance Electrical Tech Resume
- Focuses on preventive maintenance to improve equipment reliability for drive systems
- Provides direction to projects related to drives systems improvement
- Interface with maintenance technicians for preventive maintenance program optimization
- Manages documentation control processes, procedures, accuracy and quality
- Develops relevant data collection and performance KPIs
- Supports process optimization initiatives, software back-up plans and disaster recovery
- Performs failure mode effect analysis for drive systems
- Performs root cause failure analysis for drive related incidents and breakdowns
Skills For Engineering Tech, Electrical Resume
- Coordinates outage and construction activity with production and maintenance departments
- Assists in the preparation of comprehensive capital maintenance and capital investment projects
- Provides design modifications to improve facility productivity, quality, process cost, and safety
- Improves the level of preventive maintenance and equipment reliability
- Applies knowledge of materials to determine suitability and advise with respect to structural integrity, strength, and durability to enhance equipment reliability
- Perform, understand and communicate detailed information analysis and evaluation, and have a good track record working effectively within a team-based environment
Skills For Tech Svcs-industrial Electrical Resume
- Proficiency at interpreting vendor drawings, diagrams and schematics, electrical systems, PLC’s (programmable logic controllers), HMI’s (human machine interfaces) and VFD’s (variable frequency drivers) required
- Strong organizational skills, interpersonal skills and work ethic
- Supervisory, analytical and project management skills
- Strong, team oriented interpersonal communication
- Motor operated valves
- WORKING 4/10'S WITH NO PER DIEM
Skills For Instrumentation & Electrical Tech Resume
- Knowledge of Ohm's law, analog, digital and RF circuitry. Ability to troubleshoot to LRU or Component level
- The ability to obtain and retain Special Program access clearance within 365 days from submission
- Sound knowledge of PHMSA, API, NEC, OSHA, and DOT codes and standards with an ability to apply that knowledge to pipeline projects
- Operator Qualification per D.O.T. FCR 195 (Administered by Centurion)
- Program and debug PLC’s (Allen Bradley RS Logix 500 and 5000)
Skills For Electrical & Electronic Trades Tech Resume
- Meet the requirements for qualification/certification as specified by TOC
- Knowledgeable in MSDS, OSHA, and lock out procedures
- Solve electrical issues and to propose alternative solutions/improvements
- MODBUS Over I/P
- Troubleshoots station controls, PLC, tank gauge transmitters, measurement devices, tank gauging equipment, valve operators, transmitters, and instrumentation apparatus and many other instrumentation devices utilized on pipeline system. Ensures work complies with electrical codes, safety rules, and Pipeline and Hazardous Materials Safety Administration (PHMSA) regulations and requirements
- Performs high-level activities associated with the operation and maintenance of instrumentation and control systems used to conduct rocket engine or engine component testing. Apply technical knowledge in help solving and performing complex tasks and problems in the working on electronic equipment. Working knowledge of the A, B, & E-complex instrumentation systems