Tech, Maintenance Resume Sample
Work Experience
- Replaces building interior lighting as needed and resetting of circuit breakers
- Assist building scaffold with qualified scaffold builder
- Demonstrate support for the company’s environmental management system
- Routinely perform safety and productivity observations; shop, field, and vehicle inspections
- General knowledge of rigging and bolt-up procedures
- Help with piping spool installation and removal
- Advanced ability to interpret mechanical drawings & P&ID
- Lift 28 lbs from floor to crown/overhead level x 2 with a 12 second interval
- Valid driver’s license including ability to be insured by CH2M Hill’s auto insurer
- Repairs medical gas outlets in patient rooms. 5. Replaces building interior lighting as needed and resetting of circuit breakers. 6. Assists with vendor selection for new equipment based on departmental needs
- Replaces building interior lighting as needed and resetting of circuit breakers. 6. Assists with vendor selection for new equipment based on departmental needs
- Previous maintenance experience required for entry level positions
- Interpret pipeline P&ID’s, piping specifications and codes, and blue-print ISO drawings
- Perform safety and productivity observations including shop, field, and vehicle inspections; ensuring that all incidents are promptly reported Attend various components of technical, developmental and safety training
- Lead work crew in energy isolation walk down and verification of zero energy using drawings, P&ID's and energy isoation procedure prior to beginning work
- Knowledge in fabrication, assembly, handling, installation, dismantling, adjustment, alteration and repair of all piping and structural fabrication Knowledge of technical and safety policies, procedures and standards applicable to the maintenance craft
- Interpret work instructions OSHA Competent Scaffold Builder
- Operate vehicles (i.e. box van, flatbed) Ability to effectively manage and lead Maintenance crews
- Lift 40 lbs from floor to crown level x 2 with a 12 second interval
- Shovel 5 minutes self-paced and continuous. See shoveling test instructions at the end of the document
- Repetitive Stoop Test: Perform from standing position, bend forward at waist as far as possible without bending the knees with hands reaching toward the floor x 5, self-paced but continuous
- Valid driver’s license including ability to be insured by Jacob's auto insurer
Education
Professional Skills
- Strong experience with Allen Bradley PLC’s, Controls, and networking
- Experience with testing, repairing, trouble-shooting, and installation of complex electronics equipment
- Experience working within an industrial setting
- Commercial/industrial experience within a manufacturing/production environment
- Experience with preventive maintenance and corrective maintenance of Fire Alarm Systems required
- Experience in line maintenance
- Face-to-face customer service experience in a fast-paced customer oriented environment is required
How to write Tech, Maintenance Resume
Tech, Maintenance role is responsible for basic, equipment, training, integration, printing, security, manufacturing, design, assembly, leadership.
To write great resume for tech, maintenance job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Tech, Maintenance Resume
The section contact information is important in your tech, maintenance resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Tech, Maintenance Resume
The section work experience is an essential part of your tech, maintenance resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous tech, maintenance responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular tech, maintenance position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Tech, Maintenance resume experience can include:
- Valid driver’s license including the ability to be insured by CH2M’s auto insurer
- Valid driver’s license including ability to be insured by Jacobs Hill’s auto insurer
- Performs electronics installations, integration and testing for rehoming and monitoring the AFSS radio’s to the selected Enroute and Terminal Air Traffic
- Capable of learning various Jacobs, and BP safety and operational procedures and demonstrating required competencies
- Achieve ACT Work Keys Assessments scores of 5 in Math, 5 in Reading for Information and 5 in Locating Information 5 in Applied Technology
- Work on the following systems: Pitney Bowes, Kern, Laser Max, Roll Systems, and Tech
Education on a Tech, Maintenance Resume
Make sure to make education a priority on your tech, maintenance resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your tech, maintenance experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Tech, Maintenance Resume
When listing skills on your tech, maintenance resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical tech, maintenance skills:
- Experience in line maintenance and either MT2 or MT3 grade required
- Good mechanical aptitude with knowledge of mechanical principles and theory
- Valid driver’s license and the ability to be covered by CH2M’s auto insurer
- Performing system tests and analyzing the results, modifying equipment or installations to improve performance
- Assisting project engineers when directed in developing system, equipment, or installation designs and performing IDS Final Test and Acceptance
- Providing reports, updating drawings and maintaining inventories of installed equipment, spare parts and test equipment
List of Typical Skills For a Tech, Maintenance Resume
Skills For Maintenance Tech-maintenance Services Resume
- Performing repairs to fiber optic and copper cabling to include fusion splicing, and termination
- Determining test requirements, test equipment and procedures and conducting tests of installed system/equipment using various types of instrumentation
- Performing preventive and corrective maintenance on intrusion detections systems of various types and manufacturers
- Rigging Certification obtained within 90 days of hire
- Complete all new training requirements including, but not limited to robot programming and maintenance training (hydraulics and electrical)
- Standard manufacturing environment setting
- Follow directions through an understanding of the department’s objectives and critical areas of operation
Skills For Tech-maintenance Resume
- In agreement with the purpose and mission of Azusa Pacific University in providing a Christian-based higher education for its students
- Imperative ability to work in a team environment and participate in the appropriate assistance of co-workers
- Read and interpret hydraulic and electrical prints
- Obtain certification as Polaris forklift driver
- Experience with instrumentation and control devices (Both 120 VAC and 24 VDC) such as flow meters, pressure transducers, temperature devices, level controls, and VFD’s
- Five (5) years of working experience and advanced skills in one or more of the following: Mechatroncis, HVAC/R, Electrical/Electronics/PLC’s, or process equipment
- Filler/Freeze Dryer experience is very beneficial
Skills For Sca-electronics Tech, Maintenance Resume
- Recommend solutions to design problems
- Conducts quality control and monthly field safety checks on assigned employees to ensure a high quality of work has been performed and safety procedures are being properly followed. Provide feedback to Plant Maintenance Supervisor regarding technicians’ performance for employee evaluation purposes
- Follow up to verify repairs are complete
- Provide verbal and written status reports
- Learn and be able to perform operator setups and adjustments on multiple equipment lines
- Work from verbal or written instructions, service manuals, parts catalogs etc. all in English
- Work on all of the equipment lines used in the Fiserv Indianapolis production facility
Skills For Tech Maintenance Generalist Resume
- Use hand tools and precision devices
- Be able to trouble shoot simple mechanical/electronic issues with machinery
- Follow all Fiserv SOP’s and safety measures
- Conducts PM’s according to schedule, and help to train new employees in all areas of the position. Works to isolate and stop product losses, leakages, and other cost absorbing issues.
- Tech 3 Maintenance technicians are cross-trained throughout the Silgan facility to be able to respond to any Mechanical need in the plant, though they generally specialize in the equipment, processes and operations in one of the six major areas of the plant
- Maintain and record accurate parts inventory including preparing purchase requisitions
- Provide support and involvement in developing and implementing preventative maintenance schedules on equipment
Skills For Lead Tech, Maintenance Resume
- Assist other Plastic Technicians with projects
- Participate in Cell Teams and 5S activities
- One (1) year of previous experience working in three or more of the following disciplines: Mechanical piping, Structural and scaffold disciplines, rigging, bolt up, pipefitting installation
- Two (2) years of Field Maintenance experience
- Recognized as a BP CoW permit performing authority within 90 days of start date
- Equipment Certification (i.e. man lift, scissor) within 90 days of hire
Skills For Tech, Maintenance Level Resume
- Achieve ACT Work Keys Assessments scores of 5 in Applied Math, 5 in Reading for Information (Workplace Documents), 5 in Locating Information (Graphic Literacy) and 5 in Applied Technology
- Directly involved in the overall maintenance, inspection, and repair of highly technical process equipment, facilities equipment and systems, and utilities within a Production environment
- Responsible for prioritizing and executing work request assigned through a maintenance management system by a planner
- Operate efficiently, all hand/power tools, test instruments and equipment normally used in the trades