Turbine Engineer Resume Sample
Cindy Johnston
5645 Chance Valley,
Detroit,
MI
+1 (555) 374 1284
Work Experience
Turbine Specialist / Machinery Engineer
11/2016
-
PRESENT
Houston, TX
- Conduct design reviews with Control Title Holders of design analysis and drawings and get their approval
- Ensure project schedules & budgets (where appropriate) are met
- Quarterly review of all Work Instructions and Quality Plans as part of the company’s continual improvement process
- Evaluate thermal performance of gas/steam turbine power output, heat rate, stage pressures, temperatures and component efficiencies utilizing thermodynamic, aerodynamic and fluid mechanics engineering principles demonstrated through hand and computer calculations
- Schedule materials, equipment and personnel for plant outages and overhauls. Participate in the planning and scheduling of plant activities to minimize outage time and improve the plant’s performance
- Perform computer analysis of operating data to determine the causes of gas/steam turbine performance losses through diagnostic analysis of operational data for both steady-state and transient operation, along with physical inspection results of engine components. This work includes
- Gross performance characterization of major power plant components (GT, ST, HRSG, Condenser)
- Detailed analysis of GT performance (compressor & turbine) to be able to identify stage and subcomponent performance losses
- Prepare thermal performance testing procedures to demonstrate compliance with contractual performance guarantees which follow the requirements of ASME PTC-22 or ISO 2314 including uncertainty analysis. This includes calculation of GT performance and preparation of performance correction curves
Wind Turbine Field Service Engineer
07/2012
-
06/2016
Dallas, TX
- Maintain turbine history (inspections/reports, outages, specific problems, etc.)
- Participate in and/or lead teams that focus on specific problem areas or needs (i.e. Root Cause Analysis)
- Be proactive in problem recognition, using independent experience and judgment to provide solution options
- Direct and perform routine unit/equipment performance monitoring, testing and make recommendations based on the data collected
- Oversee Predictive Maintenance (Pdm) Program in support of unit characteristics and continued operation
- Availability for work after normal working hours, weekends, and holidays as required
- Provide analysis to support development of wind farm noise models and identify farm level noise mitigation methods
- Interact with blade structural designers and other wind system engineers to provide input for new wind turbine blade designs
Engineer Turbine Aerodynamics
09/2008
-
03/2012
Boston, MA
- Execute analytical and CFD-based (Computational Fluid Dynamics) applied aeroacoustic and aerodynamic design processes
- Execute experimental programs to validate new designs and explore new technologies
- Interact with tools developers to provide input for next generation tools development
- Assess design risks and establish validation plans for new concepts
- Expedited visit to customer sites
- Define first Scope Definition
- Propose technical solution
- Identify Factual findings
- Partnering other engineering teams
Education
University of North Carolina at Asheville
2002 - 2007
Engineer's Degree in Engineering
Professional Skills
- Strong written and verbal English communication skills, comfortable addressing groups
- Excellent time management, decision-making, presentation, human relations, and organizational skills
- Be an excellent communicator and have the desire to develop your skills in Energy Transition technology
- Strong understanding of and experience with wind turbine blade acoustics, loading conditions, and aerodynamics is required
- Experience with turbine design or equivalent manufacturing experience
- Testing and validation of non-destructive testing methods of fiberglass components
- Testing, validation and coordination of non-destructive testing methods on wind turbine blades
How to write Turbine Engineer Resume
Turbine Engineer role is responsible for software, travel, insurance, design, manufacturing, reporting, composites, piping, microsoft, english.
To write great resume for turbine engineer job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Turbine Engineer Resume
The section contact information is important in your turbine engineer resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Turbine Engineer Resume
The section work experience is an essential part of your turbine engineer resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous turbine engineer responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular turbine engineer position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Turbine Engineer resume experience can include:
- Design and validation of aerodynamic and acoustic add-on components
- Field and wind tunnel validation of aerodynamic performance
- In depth knowledge and experience of industrial combustion turbines operations and maintenance procedures
- Good understanding of steam turbine – generator surveillance and protection logic, and controls
- Performing, instructing and ensuring safety within service activities
- Keeping records, maintaining documentation and reporting as required by company policy
Education on a Turbine Engineer Resume
Make sure to make education a priority on your turbine engineer resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your turbine engineer experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Turbine Engineer Resume
When listing skills on your turbine engineer resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical turbine engineer skills:
- Able to work effectively and professionally with diverse people – clients and co-workers
- Experience performing visual turbine inspections, construction monitoring, commissioning, operation monitoring, or factory quality assurance assessments
- Experience in the wind power industry, specifically on wind turbine blade design and/or manufacturing is required
- Experience with or familiarity of different wind turbine platforms and manufacturers
- Aircraft or Industrial Gas Turbine Aero design and analysis experience
- Experience in Advanced Turbine Aero Design
List of Typical Experience For a Turbine Engineer Resume
1
Experience For Wind Turbine Field Service Engineer Resume
- Safety: general knowledge of applicable safety statutes and regulations and familiarity with the principles associated with maintaining a strong safety program
- Environmental: general knowledge of major environmental legislation involving air, water, hazardous materials and waste management
- Prepare high quality written documentation and reports conveying work performed and results
- Project management of smaller-scale projects
- Prepare proposals, budgets, labor costs, and write reports
2
Experience For Wind Turbine Blade Engineer Resume
- Work effectively with executive, management, and staff level employees with varying educational and professional background using verbal and written communication
- Experience: extensive knowledge of gas/steam turbine engineering including overall turbine configuration, turbine design, boundary conditions, temperatures and materials. Knowledge of the operation, maintenance and repair of gas/steam turbines and their control theories desired (the plant utilizes GE7FA gas turbines and GE D11 steam turbines)
- Computer Skills: Experience with real-time performance management software such as OSIsoft PI systems to monitor plant heat rate and efficiency. CEMS/DAHS experience desired. Advanced personal computer skills including Microsoft Office, etc
- Communications: adept at communicating with several levels of the organization. Excellent writing and analytical skills and an ability to present facts, conclusions and recommendations in written communications, both in formal and informal formats
- Work independently on the implementation of fault analyses and repair of wind turbine generator systems in Scotland, including clarification of any client queries
- Thorough understanding of steam turbine, gearbox reducer and generator maintenance and overhaul activities.
3
Experience For Engineer Turbine Aerodynamics Resume
- Prepared to travel throughout Scotland
- Turbine Specialist can be located anywhere within the North East
- Perform turbine site suitability analysis with DNV GL developed analytical tools. Evaluate site suitability assessment prepared by OEMs
- Contribute to wind turbine technology assessment, review, report writing, and client communication as part of technical due diligence for project financing, mergers & acquisitions, owner purchases, and other business needs
- Remain current on new wind turbine technology, engaging with OEMs to understand latest technical details on new products and updates/revisions to existing products
4
Experience For Aeroderivative Turbine Engineer Resume
- Perform field and factory inspections of wind turbines and components as part of operational assessments, manufacturing quality inspections, construction monitoring, and failure investigations
- Support performance of root cause analysis investigations into turbine and component failures covering inspection, documentation of field conditions, causality mapping, and engineering calculations (as appropriate)
- Ability and interest to learn aero-elastic load simulations of turbines. Example work would include detailed evaluation of turbine loads to confirm site suitability, evaluating impacts of turbine modifications (hardware and software) on turbine loads, and assessing remaining useful life of aged turbines
- Support performance of failure rate predictive statistical analysis
- Prepare detailed reports, memos, technical notes, and email correspondence to communicate clearly and objectively to clients with accuracy and technical rigor
- Complete company required documentation in a timely manner such as Job Safety Analysis, Risk Assessments, time sheets, expense reports, inspection check sheets, tracking reports and scheduling controls
- Safe working skills
- Proven HSE mindset
List of Typical Skills For a Turbine Engineer Resume
1
Skills For Wind Turbine Field Service Engineer Resume
- Work in inclement weather conditions as experienced across North America and in locations where wind energy projects are typically located
- Seasoned professional; typically requires 5+ years of experience with an emphasis in turbine engineering
- Support validate guaranteed values
- Experience in structural analysis of composite materials at full structure and detail levels
- Carrying out and performing trial-run operations and equipment test procedures
- Troubleshooting and repairing mechanical, electrical or system malfunctions
- Collaborating with engineering and other functions
- Making improvements to and offering advice about operational procedures
- Maintaining and following safety and quality procedures as required by company policy
2
Skills For Wind Turbine Blade Engineer Resume
- Mentoring and sharing knowledge within area of responsibility
- Identifying and maintaining stock of critical assets, tools and spare parts
- Ensuring periodic maintenance and repairs are made to equipment/tooling and company vehicles
- Servicing wind turbine equipment and ensure it works to its specification
- Communicating openly with client, vendors, and stakeholders
- Maintaining company vehicle with necessary tools and equipment to perform service jobs
- Use your network to bring in the right wind turbine engineering expertise and methodologies for power systems and renewable energy
- Proficient in reading and understanding mechanical and civil drawings, and electrical schematics
3
Skills For Engineer Turbine Aerodynamics Resume
- Familiarity with consulting engineering business needs and expectations and proficient in project management
- Proficient in reading and understanding operational procedures and instructions, maintenance and inspection check sheets and health and safety processes
- Fit within team, taking guidance and instruction from senior staff, while comfortable with working independently for certain periods
- Proficient in reading and understanding mechanical and electrical schematics
- Develop blade inspection, categorization, and reporting protocols to monitor and evaluate suspect blades as well as a random sampling of blade repair quality
- Principle understanding of the Chinese power market
- Knowledge of statistical methods for deriving component failure rate based on available failure data
- Liaison for Engineering Requests for Issue resolution
4
Skills For Aeroderivative Turbine Engineer Resume
- Be able to nurture great professional networks internally and externally
- Adaptable to change and have an entrepreneurial mindset
- Risk of guarantee value
- Efficiency guaranteed value of competitors
- National technical legal regulations
- Commercial implication of technical decisions
5
Skills For Wind Turbine Engineer Resume
- Knowledge of wind turbine systems including gearboxes, blades, pitch and yaw systems, generators, turbine controllers, towers, and foundations, electrical cabling, and SCADA systems
- Computer programming background (MATLAB, Python or other transferable languages)
- Knowledge of mechanical systems, materials, controls, and physical environment impact on structures
- Proficient in MS Office programs (Outlook, Word, Excel, PowerPoint), and able to learn new software
- Travel extensively in support of global assignments, as required
- Ability and willingness to travel up to 25% of the time to customer sites and GE Shops to enable work execution
- Self-starter, quick learner, takes initiative and ownership
6
Skills For Engineer, Single Stage Turbine Resume
- Be commercially responsible for management of projects and handle associated administrative details
- Accountable for assigned tasks and projects
- Understands customer service approach to work
- Think critically and assess information independently
- Knowledge of wind turbine systems including gearboxes, blades, pitch and yaw systems, generators, turbine controllers, towers, electrical cabling, and SCADA systems
- Valid driver's license with clear MVR that complies with DNV GL insurance requirements
7
Skills For Turbine Specialist / Machinery Engineer Resume
- Willingness and ability to travel in North America, up to 30% of the time
- Passport or documentation to allow international travel (entry to USA, Caribbean, or Mexico for example)
- Sit for extended periods as required for typical office work
- Climb a wind turbine tower ladder with up to 30 lbs of gear on person, typically to 100-120 m heights
- Sufficient physical fitness to perform multiple turbine climbs per day
- Enter confined or enclosed spaces
- We conduct a pre-employment background check
- Technical Service maintains and requires a positive and customer based focus to support facilities
- 50 - 60% Travel and facility based work/ support
8
Skills For Steam Turbine Performance Engineer Resume
- Aerodynamic analysis of wind turbine rotors
- Design upgrades of wind turbine rotors in general
- Communicate effectively with a diverse group of internal and external contacts, including the ability to communicate technical issues to a non-technical audience
- Compatibility of the new steam path to all interfacing components under all possible operating conditions
- Other Internal & External documentation issuing, including turbine erection and O&M manual documentation support, and inputs to customer and site documentation
9
Skills For Wind Turbine Service Engineer Resume
- Thermodynamic steam path design and steam power plant thermodynamic cycle modeling, with necessary supporting documentation and support of risk assessment to determine performance guarantees
- Thermodynamic definition of the contract steam path to other design groups to enable detailed mechanical design to be carried out during project execution
- Review, create and check document revisions as directed by change orders, engineering alterations, mark-ups or ECR’s
- Monitor, analyze and disposition wind turbine blade monitoring systems
- Train and, on occasion, assist NRG site personnel in performing blade inspections
- Analysis of thermodynamic cycle of steam plant from customer supplied data and test data
- Identification of customer requirements, determination of appropriate proposals and preparation of thermal performance data for inclusion technical proposals
10
Skills For Senior Combustion Turbine Engineer Resume
- Support review thermodynamic calculation and analysis
- Prepared to travel throughout Ireland
- Direct Chevron LM aero engine depot level hardware reclamation efforts, and assist Chevron BU’s with OEM repair and overhaul vendor warranty claims
- Disposition nonconformance’s and material deviations
- Analyze blade failures through root cause analysis and identify corrective actions to solve wind turbine blade problems
- Review and create blade repair scopes of work to ensure repairs are to the proper blade OEM specifications
- Produce inspection and repair completion reports
Related to Turbine Engineer Resume Samples
Operational Engineer Resume Sample
Work Experience
• Work with team to design, implement and maintain a scalable, flexible infrastructure for existing and future products
• Work with team to create processes and automation for common tasks, including build servers, code and artifact repositories, release management, and application deployment and mai...
Professional Skills
• Practical use of influencing techniques, c...
• Voice and video over IP configuration, tro...
• Change Management / Influencing skills
Regional Engineer Resume Sample
Work Experience
• Proactively identify and resolve engineering and manufacturing related issues and have a thorough understanding of AC/DC drives, PLC, and HMI’s
• Troubleshoot and repair of AC and DC motor control systems in a variety of applications
• Analyze and provide alternate solutions ...
Professional Skills
• Demonstrate strong troubleshooting skills ...
• Excellent oral and written communication s...
• Possess excellent computer skills with ful...
Sustainment Engineer Resume Sample
Work Experience
• Attend meetings and assist with determination of project sustainment metrics
• Reporting about the current status of sustainment management as and when required
• Assist the PM in the drafting and issuance of sustainment management in all project proposals, RFP’s, tenders, an...
Professional Skills
• Planning and task management skills
• Demonstrated experience developing scripts...
• Labwindows CVI / Teststand / scripting lan...
Engineer Electromechanical Resume Sample
Work Experience
• · Background in Electro-mechanical design is an asset
• · Electro-mechanical design and product development is an asset
• · Basic understanding of railway Rolling Stock both theoretical and practical
• Develop product drawings and models. Manage the mod...
Professional Skills
• Independent working ability; strong initia...
• Computer skills: e.g. .net programming skills
• Strong technical problem solving skills (i...
Assistant Director Engineering Resume Sample
Work Experience
• Stationary Engineer’s license if required by local code
• The worker is subject to noise: there is sufficient noise to cause the worker to shout in order to be heard above the surrounding noise level
• The worker is subject to vibration: exposure to oscillating movements of t...
Professional Skills
• Excellent customer service skills with gre...
• Demonstrate strong leadership, good interp...
• Demonstrated skills in effective budget an...
Engineer Service Resume Sample
Work Experience
• Install, configure, and upgrade nodes in high availability customer production clusters
• Build long lasting, effective partnerships across the organization to foster collaboration between Product, Engineering and Operations teams
• Organize and manage multiple simultaneous p...
Professional Skills
• IT experience in an IAAS / PAAS environmen...
• Previous experience with Network Administr...
• Very good verbal and written communication...