Electrical / Instrumentation Resume Sample
Delia Sporer
235 Camille Walk,
Philadelphia,
PA
+1 (555) 802 3193
Work Experience
Narm-electrical Instrumentation Specialist
08/2016
-
PRESENT
San Francisco, CA
- Walk construction site, climb ladders, climb stairs, walk on uneven ground, exposure to sun and weather conditions
- Driving license with good driving record
- Work on construction worksite
- Lift and carry up to 40 lb
- Coordinates work with EI&C contractors and prepare estimates, quotes & timelines for materials and labor within Ormat’s purchasing and contractor safety procedures
- Attend Monthly Safety and Maintenance training
- Troubleshoot and repair Programmable Logix Control (PLC) (Allen-Bradley) systems like SLC 500, MicroLogix, CompactLogix, PLC 5s, 5000 LogixControllers and PanelViews
- Troubleshoot and repair AC motor starter circuits
- Experience or schooling troubleshooting and repairing PLC’s and experience programming
Electrical & Instrumentation Engineer
08/2011
-
03/2016
Chicago, IL
- Ensure that all site electrical instrumentation and control equipment is operating safely and at maximum efficiency
- Address the root cause of any failure, take the appropriate action to resolve and feedback learning’s/observations to enable processes to be improved thus preventing repeat failures
- Oversee the execution of daily maintenance activities performed by employees and contractors, as per approved weekly and daily schedules
- Diagnose problems by interpreting and working from engineering drawings, blueprints, schematics and equipment manufacturer’s literature
- Developing P&ID methodology and updating all P&ID’s worldwide
- Auditing site P&ID’s and updating to new specification, and marking up of P&ID’s to upload into CAD, marking up and correcting P&ID’s where required
- Developing and managing Instrumentation numbering systems on P&ID’s
- Updating P&ID’s lists, valve lists, and instrumentation lists
- Ensuring P&ID’s and all lists match Planet FM inputs across all Odyssey sites
Electrical & Instrumentation Summer Intern
09/2006
-
04/2011
Los Angeles, CA
- Experience utilizing networking systems such as Control Net, Ethernet, and Data Highway required
- Familiar with mass flow meters, pressure transmitters, temperature transmitters, burner control systems and other like equipment found in an automated plant required
- Demonstrated ability to work in a safety conscious environment
- Work on-call as needed
- Review and prepare draft answers for related correspondence and RFI's for the site RE
- Position requires approximately 60-70% travel
- Manage outside engineering firms deliver project design details and to support project work. Provide leadership and supervision to construction contractors and equipment vendors. Manage spending to approved capital and expense budgets based on project estimates
- Works securely with the expert maintenance tools (SAP-PM, SOP’s) and trains the teams in those
Education
California State University, Fresno - Lancaster University Center
2001 - 2006
Engineer's Degree in Electrical Engineering
Professional Skills
- The shift schedule is either a six days on / six days off rotation (three days on, three days off, three nights on, six days off; 12 hour shifts) or an eight days on / six days off rotation (four days on, two days off, four days on, four days off; 12 hour shifts) based on business need
- Good planning and supervisory, strong interpersonal and communication skills. High computer literary. Strong trouble shooting and problem solving skills
- Excellent critical thinking and analytical skills when encountering issues and able to use these skills when troubleshooting
- Experience with and troubleshooting skills for the following
- Strong analytical, troubleshooting, computer and decision making skills
- Excellent analytical and trouble shooting skills typically required for the maintenance of compressor control and gas measurement systems
- Organizational skills and is able to prioritize work, develop appropriate time lines and work to deadlines
How to write Electrical / Instrumentation Resume
Electrical / Instrumentation role is responsible for interpersonal, computer, organization, analytical, maintenance, software, planning, troubleshooting, mechanical, engineering.
To write great resume for electrical / instrumentation job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Electrical / Instrumentation Resume
The section contact information is important in your electrical / instrumentation resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Electrical / Instrumentation Resume
The section work experience is an essential part of your electrical / instrumentation resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous electrical / instrumentation responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular electrical / instrumentation position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Electrical / Instrumentation resume experience can include:
- Strong sense of ownership, with demonstrated interpersonal and problem solving skills
- Good communication, listening, organization and interpersonal skills
- Excellent personnel management skills, including the ability to motivate others
- Excellent people skills - Customer focused
- Willing to develop skills in both instrumentation and electrical engineering and (Dow) tools wherever gaps exist
- Proven experience collecting as-built (loop check) information in operating facilities
Education on an Electrical / Instrumentation Resume
Make sure to make education a priority on your electrical / instrumentation resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your electrical / instrumentation experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Electrical / Instrumentation Resume
When listing skills on your electrical / instrumentation resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical electrical / instrumentation skills:
- Highly motivated with interpersonal skills to effectively work in a collaborative team environment that includes shared responsibilities,
- Excellent analytical and troubleshooting skills typically required for the maintenance of compressor control systems
- Effective leadership skills and the ability to work productively in a cross functional team environment
- Excellent interpersonal, teamwork, and organization skills
- Good computer software skills
- Excellent spoken and written communication skills with personnel of all levels (Craft through Executive)
List of Typical Experience For an Electrical / Instrumentation Resume
1
Experience For Electrical & Instrumentation Engineer Resume
- E&I Design experience
- Experience with SAP Project Module and other basic SAP transactions very desirable.
- Troubleshoot, operate, maintain and calibrate various types of equipment related to telecom, SCADA, and flow computers
- Organize and prioritize work to meet scheduled completion timelines
- Ensure facilities are operated and maintained in compliance with TransCanada's Health, Safety and Environment policies and procedures
- Participate in crew discussions (both within maintenance and with operations) prior to major events, e.g. down days, etc
2
Experience For Electrical Instrumentation & Controls Technician Resume
- Examine plans, blueprints, tracings, sketches and specifications prior to issuance of permits
- Leading and guiding E&I work for projects executed by external engineering companies and Dow’s Central Engineering Center - Chennai (CE-C)
- Drawing up of P&ID’s and doing basic CAD markups
- Preparing operation and maintenance budget
- Troubleshooting/resolve and recommend Acts as advisor to unit or sub-units and becomes actively involved to meet schedules or resolve problems
- Developing and writing applicable specifications.
3
Experience For Electrical Instrumentation & Controls Measurement Technician Resume
- Ensuring all safety rules and safe work procedures are followed for themselves and by others working in and around the machinery
- Providing leadership and active participation in team safety meetings, discussions, and training opportunities
- Troubleshooting, operation, maintenance, calibration and repair of various types of electronic, electric, pneumatic and hydraulic equipment
- Understanding of Electrical and Instrumentation discipline and other discipline interfaces
- Following all safety procedures such as Lockout, Confined Space, PPE, etc
- Connecting wires to circuit breakers, transformers, or other components
- Using environmental, safety and loss prevention principles
- Responsible for developing and implementing of energy management and monitoring program
4
Experience For Narm-electrical Instrumentation Specialist Resume
- Document monitoring and reporting regarding all site construction activities
- Plans layouts, runs conduit, wiring and tubing in both new and existing installations
- Guide and control the instrument and electrical (low voltage) design of projects executed in house, by external engineering companies or Dow’s India Engineering Center (IEC)
- Troubleshoot, test, & maintain shutdown devices, fire & gas systems, auxiliary systems, HVAC systems, relief and Over Pressure Protection devices, control valves, PLC’s & control systems
- Provide the Resident Engineer/Civil Mechanical Inspector with the information he needs during the daily meeting
- Participate in work planning and schedule review meetings
- Complies with all safety rules and regulations by following in-place procedures
5
Experience For Electrical & Instrumentation Tech-lead Resume
- Prepares material requisitions including development of equipment specifications and instrumentation data sheets
- Provides guidance to team members according to established policies
- Ensure the appropriate operational procedures are followed during the installation of the project
- Help prepare regular progress reports and other information to reflect on going work
- Inspection of Electrical Installations, ensuring compliance with the design, specifications, statutory and regulatory requirements
- Oversight over the electrical installation ensuring compliance with design and construction specifications, plans and procedures
- Inspection of Cathodic Protection (CP) Installations, ensuring compliance with the design, specifications, statutory and regulatory requirements
6
Experience For Electrical & Instrumentation Technicians Resume
- Oversight over the Cathodic Protection (CP) installations (See ) ensuring compliance with design and construction specifications, plans and procedures
- Inspection of Cathodic Protection Installations, including temporary CP systems, anode beds, TRU’s, NDU’s, test posts, cad welds, zinc ribbon etc
- Assist the HSES and QA/QC Managers for implementing QA/QC and HSES procedures and plans
- Plans and executes site acceptance tests, commissioning, and start-up or hot-cutover at customer plant sites
- Works with Global Engineering Center to achieve best cost position for project
- Disassembles malfunctioning instruments, examines and tests mechanisms, and circuitry for defects
7
Experience For Class Electrical & Instrumentation Mechanic Resume
- Assist other crafts when working together on a job
- Create and manage permit-to-work documents, compose safety documents and isolation certificates
- Mentor and train on-site personnel in execution of corrective and preventative maintenance tasks
- Identify equipment in need of maintenance and create maintenance notifications
- Navigate and track maintenance activities in CMMS (SAP)
8
Experience For Electrical Instrumentation & Control Supervisor Resume
- Interpret equipment drawings, electrical one-lines and P&ID
- Troubleshoot and diagnose malfunctioning systems, test and maintain shutdown devices, fire and gas systems, auxiliary systems, HVAC systems, relief and Over Pressure Protection devices, control valves, PLC’s and control systems (including control systems software installation and configuration)
- Perform troubleshooting tasks, on equipment such as gas turbine PLC controls, MCC’s (Motor Control Centers), automated valves, and computer networks, to name a few
- Plan, coordinate and perform maintenance activities, including routine corrective maintenance, preventive maintenance, equipment and system improvements and major maintenance projects
- Utilize effective planning/scheduling techniques in conjunction with TransCanada’s Work Management processes
- Be able to operate well conceptually and analytically
- Able to operate outside the electrical & instrumentation boundaries in order to be able to implement the best multi-disciplinary solution
- Develop Instrument Engineering efforts including instrument specifications, datasheets, field instrumentation and control system
- Manage technical aspects for Instrument engineering
9
Experience For Project Electrical & Instrumentation Engineer Resume
- Complete TransCanada Technical Roadmap training on schedule per the plan
- HBO Electrical Engineering or equivalent
- Calculations and design of instrument elements of the plant
- Knowledge of information systems, environmental requirements, quality, safety and ARBO standards
- Knowledge of NEN standards and their application
- Knowledge of current developments in the E & I discipline (knowledge of automation is an advantage)
- Familiarity with applicable codes such as NFPA 70, 70E, 497, AGA 3, 9, and XF0277, API RP 500, NEMA MG 1-2006, ICS 7.1-2006, etc
- Responsible for operation and maintenance plant electrical distribution systems (MV Switchgear, LV distribution, Emergency Diesel Generators, Power Monitoring system, MCC & VSD, Lighting, UPS etc.)
- Responsible for developing the standard operating procedures for instrument calibration and implementing of maintenance programs for operational efficiencies and minimize cost
10
Experience For Electrical & Instrumentation Inspector Resume
- Responsible for setting up the electrical work shop
- Manage vendor service contracts
- Carry out other work or task as directed by Manager
- Administers company policies that directly affect subordinate team members
- Perform installation, testing, repair and maintenance on oil storage facilities, pipelines, and oil pump stations as well as other associated equipment used in oil transmission systems
- Provide multi-skilled maintenance support with other technicians in the completion of pipeline and mechanical activities
- Provide technical assistance with troubleshooting and design of instrumentation, motors, protective devices, and other electrical equipment essential to terminal and pipeline operations
- Work with capital project management teams in scope development, design, engineering, construction, commissioning and start-up of electrical & instrumentation-related projects
List of Typical Skills For an Electrical / Instrumentation Resume
1
Skills For Electrical & Instrumentation Engineer Resume
- Strong communications skills, both oral and written, and decision-making and problem solving skills
- Excellent interpersonal and communication skills and a strong attention to detail
- Demonstrate good mechanical aptitude as part of trouble shooting skills
- Strong Information Systems skills, & Computer literacy
- Demonstrated design and engineering experience in the mining and metals sector or similar heavy industry
- Proven experience working in manufacturing plant
2
Skills For Electrical Instrumentation & Controls Technician Resume
- Prior experience in E&I Planning/Scheduling
- Ten (10) years of instrument engineering experience in refinery, chemical or petrochemical plant process or production experience
- Firm E&I basic engineering skills to translate ideas into E&I scopes and budgets
- Ten (10) years of experience in any of the following Maintenance Skill Areas: INSTRUMENTATION, ELECTRICAL
- Strong understanding and experience of GMP & EHS requirements and external/internal audits
- Demonstrated experience in maintaining industrial electrical and instrumentation components, gas analyzers, PLC’s and VFD’s required
- Focus on priority assigned and develop scope of work keeping safety as top priority followed by reliability, quality and availability of E&I assets
3
Skills For Electrical Instrumentation & Controls Measurement Technician Resume
- Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
- Skills, software knowledge and/or certifications specific to the industry/function
- Communication (spoken and written) and teamwork skills
- Able to effectively communicate with all levels of management is required
- Cooperate and assist other technicians as required, to ensure overall team effectiveness
- Sizing / selection / validating process instrumentation and corresponding hook-ups
4
Skills For Narm-electrical Instrumentation Specialist Resume
- Engineering experience in a manufacturing environment – as a professional or co-op/intern
- Sizing / selection / validating control and automated block valves
- Experience with Creo Cabling including Utilizing logical reference data (automated routing) Harness flattening using Creo Harness-MFG extension
- Demonstrated a basic understanding of manufacturing plant process and the interaction of plant operating areas
- Experience in diagnosing and repairing various electrical and electronic equipment ranging in voltages from 24 VDC to 15 KV
- Experience in repairing, troubleshooting, and programming PLCs, HMIs, and operator interfaces
- Demonstrate the ability to work at heights above 30’, including working off platforms, ladders, cranes, and scaffolds
5
Skills For Electrical & Instrumentation Tech-lead Resume
- Experience in electrical, instrumentation, and controls support in manufacturing operations setting
- Five (5) years of refining or relevant engineering experience with instrumentation and controls
- Experience using AutoCAD Drawing
- Experience developing piping, instrument, and electrical diagrams
- Experience applying reliability tools (criticality assessment, RCM, TPM, cause mapping, etc.)
6
Skills For Electrical & Instrumentation Technicians Resume
- Strong commercial understanding – required to optimise of scope technically and commercially, establishing budgets and tender submission documents
- Cost-benefit analysis for competing E/I solutions resulting in robust, cost effective designs
- Provide technical assistance to modify the facility using good engineering and maintenance practices
- Work with the site personnel to understand the key issues and identify ways to improve the operation by using good engineering judgment and solutions
- Extensive experience with Oil& Gas, intrinsically safe equipment, and working in hazardous fuel environments
7
Skills For Class Electrical & Instrumentation Mechanic Resume
- Set up and operate conduit benders, tubing benders, test equipment, etc
- Operate programmable controllers, configure and service process controls for required troubleshooting
- Experience in site monitoring / site supervision would also be an advantage
- Experience with calibration, loop checking, and maintenance and repair of instrument and pneumatic equipment
- Experience in the investigation, planning and supervision of construction works and/or maintenance activities in operational facilities
- Experience in Coordinating Contractors
- Experience in paper mill, power plant, or chemical plant maintenance planning is beneficial
- Knowledge or experience in construction, engineering or facilities management
8
Skills For Electrical Instrumentation & Control Supervisor Resume
- +3 years’ experience in the process industry or engineering firm
- A period of over 4 years and up to and including 8 years’ experience is considered necessary
- Optimization or Reliability experience in a chemical manufacturing facility
- Experience in working across multiple layers of an organization
- Experience with E&I equipment design, troubleshooting, function, and reliability
- Experience with establishing reliability analytics
- Safely performs all work activities including operate company vehicle
- Strong understanding of P&IDs and control logic
- Operates programmable, logic controllers and distributive controls and configures controllers for required troubleshooting
9
Skills For Project Electrical & Instrumentation Engineer Resume
- Project Management or Project Engineering experience
- Technical experience preparing execution work plans, interface work flows, and project status reports
- Experience working on large chemical projects
- Experience with power plant systems/designs including DCS, PLC, Medium and Low Voltage Controls
- Excellent salary package and benefits; and
- Work independently, be able to prioritize work, and be a self-starter
- Proven track record in the design and co-ordination of E&I installations
10
Skills For Electrical & Instrumentation Inspector Resume
- Strong Background with PLC’s (example: GE Fanuc, Siemens, Allen Bradley, etc.)
- Instrumentation and measurement experience would be considered an asset
- Chemical plant experience
- Experience on Distributed Controls Systems (DCS) or PLCs design and electrical design for projects
- Experience with ISO9001 requirements
List of Typical Responsibilities For an Electrical / Instrumentation Resume
1
Responsibilities For Electrical & Instrumentation Engineer Resume
- Conceive, justify, design, & implement new instrumented equipment. Includes analyzing historical data and process trends, sizing and selection of equipment & hardware
- Work with third-party companies and product representatives as required to assist in engineering, design, factory acceptance testing, and commissioning & start-up activities
- Strong verbal communication skills. Capable of carrying out training sessions in front of a large audience
- Proven experience developing and maintaining Process Safety Management (PSM) regulated drawings
- Experience as a hands on multi-skilled engineer maintaining electrical, control, mechanical and pneumatic related plant and equipment
- Skilled at leading, managing conflict and negotiating with cross-functional teams
- Monitor, operate, troubleshoot, repair and maintenance of these equipment serving Manufacturing, Lab, Utilities and Office
- Six or more years in reliability engineering and management tools with experience in E&I engineering
- Experienced with troubleshooting controls systems
2
Responsibilities For Electrical Instrumentation & Controls Technician Resume
- Strong technical aptitude and problem solving ability
- Experience using Microsoft Office tools such as Word, Excel, PowerPoint, and Project
- Leadership experience in a manufacturing company with focus on Electrical and Instrumentation Maintenance
- Experience with electrical codes and applying them in the workplace
- Experience with OSHA electrical compliance standards and managing them in the workplace
- Programming, designing and developing new control systems hardware and software
- Working knowledge of Creo Schematics 2.0 desired including: Block Diagram to Wiring Diagram
- Coordinating with engineering staff, local and remote
- Willing and able to work twelve (12) hour rotating shifts, weekends, holidays, and overtime when required
3
Responsibilities For Electrical Instrumentation & Controls Measurement Technician Resume
- Willing and able to work any shift including weekends, overtime and holidays as needed
- Bidding rules (general specifications, particular specifications, work volumes, drawings, etc.) referring to the needs of the instrumentation and control area
- Working level knowledge of applicable computer programs
- Understanding and knowledge of applicable industry standards
- Working knowledge of hydraulics, pneumatics, PLC, HART, and OT systems and components
- Performing technical and maintenance work on a heavy industrial plant
4
Responsibilities For Narm-electrical Instrumentation Specialist Resume
- Performing routine inspections on plant & equipment
- Participating in a preventative maintenance program to ensure machinery uptime
- Lightning protection system specifications
- Lighting requirements and distribution
- Writing Scope of Work, Specifications and datasheets
- Developing P&ID’s and schedules, and correct equipment selection
- Troubleshooting AC/DC drives
5
Responsibilities For Electrical & Instrumentation Tech-lead Resume
- Loop checking, equipment set-up, program downloading, megger testing, loop tuning, troubleshooting and assisting with start-up
- Problem solving, troubleshooting, installing, repairing and maintaining facility electrical distribution and manufacturing process equipment
- Preparation of engineering reports and calculations including electrical protection, equipment sizing, cable sizing and system studies analysis
- Become thoroughly familiar with Drafting and Checking procedures and client and project drafting standards
- Development of an optimised work program from scope documents, including identifying resourcing, work program/schedule and oversight of materials procurement
- Read, design and interpret wiring schematics, piping and instrument diagrams for new and existing equipment
- Assist in providing technical training for Engineering and Operations personnel
- Develop electrical power plans, cable tray routing, wiring diagrams and interconnections while adhering to heavy industrial practices and standards
6
Responsibilities For Electrical & Instrumentation Technicians Resume
- Successfully complete a pre-employment medical screening including drug & alcohol testing, employment & education verifications, references
- Be part of exceptional, diverse work teams combining and applying vast engineering and business knowledge to the world’s toughest challenges
- Obtain understanding of assignments including special requirements and schedule for completion
- P&ID development, Control strategy, Estimating, Scheduling
- Control System programming and troubleshooting
7
Responsibilities For Class Electrical & Instrumentation Mechanic Resume
- Advanced Diploma in Engineering Drafting and/or relevant trade qualifications or equivalent
- Assist in scoping new system installation and upgrading installed systems installation in Class I Div. I area
- Work closely with drafting personnel, production and maintenance personnel, vendors, consultant engineers, corporate engineering, and construction contractors
- Serves maintenance crafts, operations and projects by assisting with E&I engineering support
- Provides I & C deliverables using ISA based standards including I/C instrument lists and DCS/PLC Network interconnections, loops and schematics
- Competent in understanding and producing Instrument and Controls documentation
8
Responsibilities For Electrical Instrumentation & Control Supervisor Resume
- Capable of managing task assignments, scope, schedule and business - A working knowledge of Microsoft Office and AutoCAD 2D & 3D or newer programs
- Comfortable interacting with clients and contractors in a field setting
- Have an aptitude for networking systems and industrial protocols eg. Routing, Bacnet, Modbus, etc
- Knowledge of design, maintenance, testing and commissioning E&I equipment
- Has knowledge of computer-assisted engineering and design software and equipment used to perform engineering task
- Successfully complete a pre-employment medical screen, including drug and alcohol testing
9
Responsibilities For Project Electrical & Instrumentation Engineer Resume
- Electrical Engineering input into multiple small engineering projects
- Development of electrical distribution designs including switchrooms, substations, motor control centres and field equipment, including instrumentation
- Tender and Costing preparation for projects of all sizes, including estimates
- Advanced part modeling techniques including the use of relations, analysis features, and flexible components
- Develop to completion engineering drawings of complex areas of the project with little or no supervision
- Provide technical guidance and assistance to lower classified design and drafting personnel
- Verify that all layout information is correct and current, and prepare drawings from engineering design sketches
- Coordinates with counterparts in other disciplines as needed, keeping team leader informed
- Construction Package Design, including location plans, termination drawings, installation details, scope definition, I/O lists, Instrument lists.
10
Responsibilities For Electrical & Instrumentation Inspector Resume
- Utility analysis, scope development, estimating
- Electrical specification and selection (Lighting, High, Medium, and Low Voltage Transformer, MCC, Capacitor, VFD)
- Electrical design, startup, and troubleshooting
- Act as liaison with the site's construction coordinator, assisting with installation problems
- Scope development, project estimation, project paper development, cost control and reporting
Related to Electrical / Instrumentation Resume Samples
Electrical & Instrumentation Technician Resume Sample
Work Experience
• Using mathematics to perform any and all calculations required for the position
• Using logic when trouble shooting problems to arrive at solutions
• Following all departmental and company written policies and procedures
• Running PVC conduit and pullin...
Professional Skills
• Demonstrate high quality fault finding ski...
• Experience in diagnosing, repairing, or re...
• Experience working with pulp and paper, co...
Mechanical / Electrical Resume Sample
Work Experience
• Possess good computer skills and demonstrate ability to use Microsoft Office Suite or other computer software to formulate work plans, prepare written materials, and articulate goals and action plans
• Prepare comprehensive written work plans, detailed project outlines and progress schedules with c...
Professional Skills
• Excellent report writing skills, experienc...
• Excellent leadership skills and experience...
• Strong negotiation and presentations skills
Supervisor Electrical Resume Sample
Work Experience
• Oversee the formal planning, tracking, and reporting of project’s electrical engineering and interconnection work
• Tracks weekly time per employee by task on site and work with site administration for input of each employee’s hours related to payroll
• Directs and develops e...
Professional Skills
• Demonstrated strong practical experience i...
• Electrical experience in the mining or oth...
• Have excellent verbal and written communic...
Tech-electrical Resume Sample
Work Experience
• Physical requirements are: sitting, walking, standing, extensive use of stairs, and access to remote structures
• Perform functional and diagnostic tests to determine root cause of malfunctions and recommend repairs to established manufacturer’s tolerances
• Determine routing...
Professional Skills
• Strong problem solving, judgment, and crit...
• Metering (volumetric and mass measurement)...
• Responding to downtimes and show element q...
Electric Resume Sample
Work Experience
• Electrical and mechanical training for industrial environment and two to three years experience
• Work with Nissan’s partners to ensure the business objectives of the Zero Emission Mobility program are met, which include public education and outreach, infrastructure readiness, securing incentives, ...
Professional Skills
• Advanced German skills and goo English skills
• Experience working with teams having diver...
• Experience working constructively with tea...
Senior Engineer / Electrical Engineer Resume Sample
Work Experience
• Sets technical direction on projects to Level 1 and 2 Engineers and Technicians
• PC and related equipment
• Work closely with cross-functional team to develop first in class medical device
• Guide the work efforts of junior engineers, technicians, and ...
Professional Skills
• Demonstrated competence in methodical and ...
• Communicate with employees at all levels i...
• Strong communication skills, with good kno...