Layout Engineer Resume Sample
Edwardo Koch
41815 Hailey Cape,
Phoenix,
AZ
+1 (555) 308 4427
Work Experience
Senior Layout Engineer
02/2018
-
PRESENT
Boston, MA
- Layout of IC designs for existing technologies (CMOS, BiCMOS, Bipolar etc)
- Evaluating layout requirements for designs targeting different technologies (analog or digital)
- Place & Route for digital designs
- Contributing to layout tool suites by supporting and/or developing CAD scripts (Memory cell placement, antenna effect mitigation, etc)
- · Experience in design of high performance data converters and high speed circuits (GHz)
- · Experience in designing a range of analog circuits such as amplifiers, oscillators, reference circuits and comparators
- · Excellent understanding of process technology and the influence on circuit behavior
- · Excellent understanding of circuit simulators and simulation techniques
- · Ability to create innovate circuits and identify novel circuit techniques
Layout Engineer
06/2014
-
10/2017
Los Angeles, CA
- Work with engineering to define variation requirements for geometric interfaces and ensure compliance for Static/Dynamic clearances, service, craftsmanship, assembly and manufacturing and total vehicle package targets
- Support GD&T creation, RSS calculations and print review
- Knowledge in device matching, balance, and shielding of critical device and signal
- Layout skills to finish tasks quickly and catches up on tight tape-out schedules if needed
- Decent understanding in the issues of electro-migration and IR drop, RC delay, self-heating, capacitive cross-talk, etc.
- Receives the input data for the layout engineering of the building (Process & Instrumentation Diagrams, equipment data, cable list, electrical load list, etc.), analyses them and verifies their technical consistency
- Carries out layout engineering or makes proposals to improve the layout - Lays out the various mechanical and electrical equipment; Design the pipes, HVAC ducts and electrical cable trays in the 3D model; Carries out an initial check of the consistency between the process & instrumentation diagrams and the 3D model
- Writes the related technical documents (progress reports, equipment introduction note, change impact analysis, design procedures, etc.)
Junior IC Layout Engineer for Industrial Product
08/2008
-
03/2014
Houston, TX
- · Excellent written and oral communication skills are also required
- · Ability to work well as part of a team
- · Track record of technical publications and conference presentations would be an advantage
- Interfacing with the Operations & Integration Lead to translate activity sequences into a Facility layout that aids operational efficiency
- Ensuring that Health and Safety requirements are inherent within the layout development and the ability to show how these have been met by the deign output
- Lead the dimensional variation agreement process for part-to-part functional interfaces
- Work with cross-functional team of design and release engineers, suppliers, design studio, craftsmanship engineering, CAD to deliver variation management and compliance
Education
St. Lawrence University
2003 - 2008
Engineer's Degree in Engineering
Professional Skills
- Cadence skill programming; Other programming skills such as PERL, TCL and Python
- Demonstrated programming skills in one or more of the following: C/C++, Java, or Perl
- Soome programming skills SKILL etc
- A strong team player with problem solving skills
- Strong communications skills; written, verbal, presentation and listening
- Excellent teamwork skills, including written and verbal communications, with both local and remote design layout teams
- A strong team player and good communication skills for working with engineers spread across the globe and sites
How to write Layout Engineer Resume
Layout Engineer role is responsible for programming, perl, english, software, design, analytical, leadership, cadence, presentation, microsoft.
To write great resume for layout engineer job, your resume must include:
- Your contact information
- Work experience
- Education
- Skill listing
Contact Information For Layout Engineer Resume
The section contact information is important in your layout engineer resume. The recruiter has to be able to contact you ASAP if they like to offer you the job. This is why you need to provide your:
- First and last name
- Telephone number
Work Experience in Your Layout Engineer Resume
The section work experience is an essential part of your layout engineer resume. It’s the one thing the recruiter really cares about and pays the most attention to.
This section, however, is not just a list of your previous layout engineer responsibilities. It's meant to present you as a wholesome candidate by showcasing your relevant accomplishments and should be tailored specifically to the particular layout engineer position you're applying to.
The work experience section should be the detailed summary of your latest 3 or 4 positions.
Representative Layout Engineer resume experience can include:
- Good Microsoft Word, Excel, PowerPoint skills
- Good PDMS, AutoCAD skills
- Self-motivation, result oriented, good team work and communication skills
- Good Caesar II skills
- Possess excellent communication skills, both oral & written
- Drawing layout of semiconductor valid/non-valid devices for test patterns/chips
Education on a Layout Engineer Resume
Make sure to make education a priority on your layout engineer resume. If you’ve been working for a few years and have a few solid positions to show, put your education after your layout engineer experience. For example, if you have a Ph.D in Neuroscience and a Master's in the same sphere, just list your Ph.D. Besides the doctorate, Master’s degrees go next, followed by Bachelor’s and finally, Associate’s degree.
Additional details to include:
- School you graduated from
- Major/ minor
- Year of graduation
- Location of school
These are the four additional pieces of information you should mention when listing your education on your resume.
Professional Skills in Layout Engineer Resume
When listing skills on your layout engineer resume, remember always to be honest about your level of ability. Include the Skills section after experience.
Present the most important skills in your resume, there's a list of typical layout engineer skills:
- Demonstrates excellent written and verbal communication skills required to effectively interface with other engineers and management
- Possess strong technical & analytical background with good problem solving skills
- Strong leadership and negotiation skills to drive for win-win solutions
- Demonstrated skills/knowledge of design revision control systems such as Cliosoft, Synchronicity or ICManage
- Excellent collaboration skills in cross-functional organization
- Good command in AutoCAD software and familiar to Microsoft office software and ERP usage skills
List of Typical Experience For a Layout Engineer Resume
1
Experience For IC Layout Engineer Resume
- Good interpersonal/teamwork skills
- CAD tools skills (e.g. PCB layout editor)
- Experience from performing site-surveys (necessary certificates mandatory)
- Experience of block level floorplanning
- Experience of Matching / Interdigitation techniques
- Knowledge of Skill programming language a benefit
- Proven engineering background
- Experience with physical design and verification of high performance RF transmitter, receiver, PLL subsystems
2
Experience For Plant Layout Engineer Resume
- Circuit block experience with RF PLL VCO, dividers, CDR/SerDes, TIA/Driver, Power management
- Expert knowledge and experience with ADS, Virtuoso and/or Mentor layout, DRC, LVS and/or parasitic extraction
- Experience of Layout techniques essential
- Experience of IC physical verification tools
- Experience of Cadence Virtuoso a preference
- Beneficially experience withIC layout and Cadencedesign environment
- Experience with electronics and UNIX/LINUX environment
- Innovative, with ability to raise good questions
3
Experience For Analog Layout Engineer Resume
- Participating to the IPs/SOC I/O distribution including power supply strategy, signals distribution between blocks
- Delivering Analog/RF layout blocks and/or macros according to the top floorplan strategy
- Knowledgeable on layout techniques for device matching, minimizing parasitics, RF shielding, and high frequency routing
- Potentially planning, ensuring stakeholder management and leading projects from start to finish
- Layout of high speed BiCMOS circuits, including drivers and receivers, with particular attention to parasitics from routing and placement
- Layout of precision BiCMOS circuits, including op-amps, buffers & references, with particular attention to device matching and overall layout symmetry
- Manage & Optimizing Engineering Key Performance figures in Unit
4
Experience For Integrated Circuit Virtuoso Layout Engineer Resume
- Report the project situation (for the A&P scope) to the Discipline Manager (DM) during the discipline meeting
- Handle full chip layout activities including pad ring, isolation, ESD
- Perform chip level layout activities with the understanding of all the engineering constraints
- Provide IC layout design support by performing floor planning, stdcell layout, block level layout and fullchip level layout designs
- Capable of top level floor planning with knowledge of transistor, resistor, and capacitor matching in sub-micron process
5
Experience For Senior Layout Engineer Resume
- Understand best known layout practices, such as, device matching, critical net shielding, ESD/Latchup, HV/power device layout and device isolation, etc
- Challenge design on implemented schematics regarding wells, matching, size, primitive components, power/ground)
- Issues the layout drawings to the various teams and coordinates their layout activities by ensuring compliance with the layout rules
- Use QRC extraction to analyze andreduce noisy/sensitive coupling
- Carries out layout engineering or makes proposals to improve the layout
- Layout high performance Analog and Mixed Signal circuits using the latest Cadence design tools
- Be able to participate in studies, write a study report, and bring the study in to execution
6
Experience For Senior Piping & Layout Engineer Resume
- Knowledge of governing regulations and standards; ASME, NORSOK etc
- Preparation of the floorplan and documenting layout work
- Exposure to Brownfield modifications work and front end engineering work is desirable
- Collaboration with the ATE design & layout team to coordinate cell placement and routing in the larger system hierarchy
- Fully responsible of creating elevator solutions and GA-drawings
- Co-operation and coordination with other engineering areas
7
Experience For Concept & Layout Engineer Resume
- Active communication and co-operation with customers and KONE Front Lines in providing optimized solutions
- Support & responsible to Layout Engineering Calculation in project base when requested
- Handle Fault Feedback cases and solution providing
- Manage Engineering Tool Development and maintenance
- Develops own area layout engineering quality and content (standards, processes)
8
Experience For Photonics Layout Engineer Resume
- Competence to understand building drawings and create elevator GA-drawings even reference case does not exit
- Ensures conformance to contract for all discipline engineering and material
- Support the Lead Engineer to solve the NCR coming from site
- Report to the Discipline Manager the technical problem found during the project execution and the solution realized
- Perform floor planning, block level layout, verification, parasitic extraction and top-level integration of high performance analog circuits
- Generate all supporting documentation, drawings and colleteral
- Autonomously establish functional layout solutions or requirements meeting outlined specifications and relevant national regulations
9
Experience For Senior Analog Layout Engineer Resume
- Produce a broad spectrum of core process engineering and related deliverables to a FEED level of detail, example
- Able to work on concept level, using minimal of information to determine key elements, issues, challenges or opportunities within field of expertise
- Confident holding presentations within the own field of expertise and able to lead multi-discipline meetings
- Perform critical circuit block, subsystem and top-level layout and verification using state-of-the art tools and techniques in advanced RF node processes
- Manage layout workflow with other layout engineers working from geographically diverse sites
- Run active and metal fill generation, density checks, working with designers to resolve violations
10
Experience For Frame / Layout Engineer Resume
- Take a lead role in floorplanning and block layout for multiple developments
- Show leadership in managing a small team of layout engineers
- Well written, accurate and timely produced reports and updates, containing clearly presented results
- Work with digital implementation designer to integrate mixed-signal layout including third-party IP
- Keen interest in improving layout methodology
- Work independently as well as in teams, including remote design teams
- Knowledge of verification tools including Calibre
- Familiarity with analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes
- Capacity to take on board new approaches and working methods
List of Typical Skills For a Layout Engineer Resume
1
Skills For IC Layout Engineer Resume
- Having a strong focus on design for quality (designs are properly verified, validated, and tested for long-term reliability and zero defect)
- Experience in perl scripting or Skill coding or similar scripting language
- Exceptional interpersonal and communication skills are critical for working with engineers spread across the globe and sites
- Exceptional layout planning and integration skills from small blocks to toplevel
- Technical skills in piping and layout discipline
2
Skills For Plant Layout Engineer Resume
- Good skill on problem solving and leadership is appreciated
- Soome programming skills
- Good experience with data management / data archival tools
- Communication and organizational skills, creativity, team oriented
- Computer skills: MS Office (Windows, MS Word, MS Excel, PowerPoint etc
- Skills in development of standard and custom analog cell libraries
- Excellent interpersonal, communication and presentation skill
- Fluent communication and presentation skills in both English & Mandarin
3
Skills For Analog Layout Engineer Resume
- Coding in Skill language, C/C++, or Perl
- Experience in either piping engineering or mechanical engineering or HVAC or similar areas of engineering
- Experience in tape-out process, including working with foundry for mask making
- Experience in preparation of deliverable schedule, maintain man-hours budget, planning discipline activities, forecasting and progress reporting
- Strong understanding of matching techniques, layout dependent effects in deep submicron process nodes
- Candidates with extensive experience in IO pad ring placement and understanding of ESD guidelines would be desirable
4
Skills For Integrated Circuit Virtuoso Layout Engineer Resume
- Design office experience with knowledge of several areas of engineering (pipework, electricity, civil engineering)
- Experience floor-planning and leading large mixed signal Ics
- Industry experience in mixed signal CMOS IC layout design at block & chip top level, including chip floor planning and integration
- Experience in leading discipline engineering team in projects
- Good understanding of the Linux OS environment
- Good understanding of device structure and fabrication flows
5
Skills For Senior Layout Engineer Resume
- Proven understanding of analog circuit design and simulation methodology, CAD tool flow for 7nm/14nm process
- Proven track record for independently achieving work output
- Experience in statistical analysis, RSS, GD&T and manufacturing
- Experience in any of the following: VISMOCKUP, CATIA, and Tce
- Demonstrated analytical and systematic teamwork approach to troubleshooting
- Demonstrated knowledge of using layout design tools such as Cadence or Mentor
- Familiar with semiconductor manufacturing processes. Basic Process and Device technology experience
6
Skills For Senior Piping & Layout Engineer Resume
- Process integration, semiconductor manufacturing, and device technology knowledge/experience
- Experience in one or several areas of engineering, mechanical, HVAC, safety etc
- Experience in shell scripting, perl, python or similar language
- Experience working with design engineers to iterate layouts for optimization through PEX flow
- IC custom layout working experience required
- Experience with top-down physical design techniques
7
Skills For Concept & Layout Engineer Resume
- Experience in analog layout
- B.Tech with 6+ years of industry experience in block level and full chip layout in multiple process technology nodes preferably in 40nm
- Experience in the layout of high precision ADCs are highly desirable
- Experience in power IC Layout
- More than 3 years of experience in the area of Layout
- At least 5 year experience in IC Layout
- Experience with Place & Route CAD tools and approaches
- Experience in both analog and digital layout design techniques
- Experience in DRC, LVS, ERC, Antenna, and post layout extraction
8
Skills For Photonics Layout Engineer Resume
- Experience with foundry command deck, PDK, fabrication & mask process
- Tapeout flow experience, Jobdeck review of fractured mask data (MEBES)
- Ensuring that all relevant parasitics are taken into account and ensuring quality by identifying and verifying device matching, IR drop and electromigration
- Issuing the layout drawings to the various teams and coordinating their layout activities by ensuring compliance with the layout rules
- Learning and experimenting with the latest cutting edge processes to implement new ATE architectures
- Using physical layout knowledge including matching, parasitic effect, floor plan, ESD&Latch up to improve project performance
- Studying handling equipment required for installation and maintenance
- Understanding of cutting edge silicon process technologies (CMOS 7nm and below) and device physics
- Understanding of cutting edge silicon process technologies (CMOS 28nm and below) and device physics
9
Skills For Senior Analog Layout Engineer Resume
- Using CAD and / or 3D modelling to clearly articulate design information
- Implementing cell layouts from placement through routing to final verification and tapeout
- Carrying out an initial check of the consistency between the process & instrumentation diagrams and the 3D model
- Writing related technical documents such as progress reports, change impact analysis, erection area drawings
- Understanding of layout effects on circuit performance
- Developing spatial layouts for docks, buildings, plant rooms, equipment etc.
- Setting up process and transfer product knowledge inside the team
10
Skills For Frame / Layout Engineer Resume
- Holding the National Engineer Qualification Certificate or above is an advantage
- Managing the layout database and collateral
- Strategizing and implementation of high-speed analog layout
- Performing layout verification with LVS/DRC support, quality check and documentation
- Assessing methods of installation for equipment and constructability
- Being able to leverage layout expertise to provide technical training and write technical guidelines
- Providing deep technical support related to physical integration at layout phases in the Analog/RF domain
- Identifying root cause and solutions for issues identified on 1st prototypes
- Creating hierarchy and layout as well as schematics of the critical blocks, such as unit pixel, based on information provided from RnD team
List of Typical Responsibilities For a Layout Engineer Resume
1
Responsibilities For IC Layout Engineer Resume
- Good knowledge and understanding of handling equipment
- Layout design experience in Analog, RF and HSDD boards
- Perform physical design of RF and analog and full custom layout blocks within the constraints of solid layout design principles
- Has experience of a range of both CMOS and SiGe process nodes
- Experience with 2D technical drawing
- Experience in high current, high voltage circuit layout, high accuracy Opamp
- Experience in Cadence OA IC Layout tool set
2
Responsibilities For Plant Layout Engineer Resume
- Analog IC layout experience
- Good command of written and spoken English required
- Mentor Caliber experience to run DRC & LVS
- Experience in IC layout field
- Minimom 3 years of experience in layout
- Advantage: Experience in advanced nodes
- Good knowledge of other 2D and 3D design software (AutoCAD, Navisworks)
- 5+ years’ experience in analog integrated circuit layout
3
Responsibilities For Analog Layout Engineer Resume
- Experience level: Engineer or Chartered Engineer
- Experience with Microsoft Word and PowerPoint is required for documentation
- Experience in 180nm, 130nm and 65nm (or below) design nodes
- Industrial experience in Analogue IC layout
- Demonstrate a proactive approach with the ability to identify own solutions to problems
- Block layout by placement and routing of electrical devices according with schematic
- Consider boundary conditions related to matching, wire-sizing, parasitic
4
Responsibilities For Integrated Circuit Virtuoso Layout Engineer Resume
- Regularly carries out layout engineering reviews (with all the engineering teams involved)
- Purchase packages for piping valves, and act as Purchase Responsible Engineer, make and follow up a Technical Requisition
- Provide technical support and coordination during fabrication, construction, check-out and start-up activities
- Awareness and know how on related internal economic factors affecting assigned areas as to the given layout
- Design complex layout for mixed signal, and analog circuits. (including block level layout, ad-hoc support on chip level integration)
- Review and analysing floor plans and complex circuits with circuit designer
- Design complex layout for mixed signal, and analog circuits. (including block level and chip level layout)
- Basic knowledge of semiconductor device physics, knowledge of methodology and CAD tools for layout verification, basic knowledge of IC manufacturing
5
Responsibilities For Senior Layout Engineer Resume
- Practical Engineer\B.Sc in Electronics Engineering
- 6+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore facilities
- Perform floor planning, block level layout, verification, parasitic extraction and top-level integration of High-Speed analog circuits
- Perform floor-planning for production and development test patterns
- Perform device matching, and other specialized layout techniques
- Manages and monitors the modifications requested by the various engineering teams
- Develop, check and release full documentation packages as required per work instructions and project requirements
- Lays out the various mechanical and electrical equipment
- Design the pipes, HVAC ducts and electrical cable trays in the 3D model
6
Responsibilities For Senior Piping & Layout Engineer Resume
- Carries out an initial check of the consistency between the process & instrumentation diagrams and the 3D model
- Work at multiple levels of hierarchy, from macro level to top-level
- Verify connectivity and design rules in Cadence environment
- Do some basic analog design and verification tasks
- Engage with Technology Development, Process Integration, Metrology, Photolithography, Characterization, Data Preparation, Design Services, and Mask House teams for specifications to design electrical and optical designs as well as an overall frame structure to be developed
- Use or customize Process Design Kits (PDKs) as well as other physical design tools, to generate electrical and optical designs as well as assemble an overall frame structure, to enable reticle level designs to be defined
- Verify the accuracy of electrical and optical designs as well as an overall frame structure using Design Rule Checking (DRC) tools or similar custom scripts and work with the specification owners to gain approval by the Waiver Review Board (WRB) when applicable
- Interact with other teams such as Field Application Engineering, Product Engineering, Release Team, and Design Enablement, to assist with providing a best-in-class Customer Tape-out Operations experience
7
Responsibilities For Concept & Layout Engineer Resume
- Occasionally interact with external clients to understand and support their needs
- Participate with assessing our team business processes and suggest continuous improvements as well as automation opportunities to enhance the teams' productivity
- Running all physical verifications as DRC/LVS/DFM and parasitic extractions in order to achieve high quality layout deliveries (best in class silicon integration, all foundry rules and design constraints validated, leading to high performance blocks in a well-defined database management)
- Design and 3D modelling of piping systems
- To be aware of and adhere to the Aker Solutions values, systems and processes including PEM and AKiMS
- Assist in the preparation of CTR's and man-hour estimates via the Aker Integrated Management System (AKiMS) where applicable. Prepare CTR estimates for piping& layout scopes, construction and commissioning procedures
8
Responsibilities For Photonics Layout Engineer Resume
- Review and check the work of others, Review and comment on vendor information and assist with inspection and testing, Carry out onshore / offshore survey and answer site queries
- Prepare engineering concepts and develop into detail design, Carry out manual and computer analysis
- Area layout and 3D modelling of equipment
- Estimation of piping activities
- Familiar with the aspects of HAZOP / HAZID, Pipe Stress Analysis, Pipe Supports < 1 tonne
9
Responsibilities For Senior Analog Layout Engineer Resume
- Basic knowledge of design software such as PDMS, Navisworks and Autocad
- Current Offshore Survival Certificate and current Offshore Medical Certificate
- Ensure that interfaces towards other disciplines are handled in an efficient way
- Generate drawings and work package for fabrication and installation
- Perform offshore and onshore surveys
- Higher technical education (MSc or BSc) within relevant area
10
Responsibilities For Frame / Layout Engineer Resume
- Definition, design, verification, and documentation of the blocks such as, for example, pixel arrays for both product line as well as RnD team
- Support/assist in tapeout of the products and testchips
- Support design team with layout of critical blocks
- Parasitic extraction, DRC, LVS, ERC
- Well conversant in preparation, checking and approval of all design engineering deliverables, philosophies, specifications, calculations, reports, datasheets, Requisitions, Technical Bid Evaluations and Vendor data review are essential
Related to Layout Engineer Resume Samples
Completions Engineer Resume Sample
Work Experience
• Review and monitor drilling and completion costs to identify areas of needed improvement. Propose changes to accomplish cost savings that enhance the overall profit
• Review and monitor drilling and completion performance to identify areas of needed improvement. Propose changes to improve drilling ...
Professional Skills
• Strong interpersonal, influencing and comm...
• Demonstrably strong technical, operational...
• Design and planning skills,
Messaging Engineer Resume Sample
Work Experience
• Experience as an Exchange Administrator and/or Engineer in a large, global enterprise environment, including actual hands-on Exchange server installation and upgrades
• Experience working with Lync/Skype for Business, advanced level Active Directory administration
• Global en...
Professional Skills
• Strong leadership and interpersonal skills...
• Strong experience in architecting and/or b...
• Technical writing skills for documentation...
PCB Layout Engineer Resume Sample
Work Experience
• Ensure components out of libary are as specified
• Translate electronic and guideline requirements into ECAD tool contraintsProcesses▪ Ensure design goes along with PLC (Product Life Cycle)
• Ensure processes and method as described in Process House are considered (improve pr...
Professional Skills
• Proven hands on experience in Mobile PCB l...
• Is a team leader with excellent interperso...
• Prior working/design experience with softw...
Engineer Electromechanical Resume Sample
Work Experience
• · Background in Electro-mechanical design is an asset
• · Electro-mechanical design and product development is an asset
• · Basic understanding of railway Rolling Stock both theoretical and practical
• Develop product drawings and models. Manage the mod...
Professional Skills
• Independent working ability; strong initia...
• Computer skills: e.g. .net programming skills
• Strong technical problem solving skills (i...
Assistant Director Engineering Resume Sample
Work Experience
• Stationary Engineer’s license if required by local code
• The worker is subject to noise: there is sufficient noise to cause the worker to shout in order to be heard above the surrounding noise level
• The worker is subject to vibration: exposure to oscillating movements of t...
Professional Skills
• Excellent customer service skills with gre...
• Demonstrate strong leadership, good interp...
• Demonstrated skills in effective budget an...
Engineer Service Resume Sample
Work Experience
• Install, configure, and upgrade nodes in high availability customer production clusters
• Build long lasting, effective partnerships across the organization to foster collaboration between Product, Engineering and Operations teams
• Organize and manage multiple simultaneous p...
Professional Skills
• IT experience in an IAAS / PAAS environmen...
• Previous experience with Network Administr...
• Very good verbal and written communication...